Search

Achieving independent multitasked wavefront control by using an ultrathin plate is a challenge to increase information capacity in integration optics and radar applications. Transmission-reflection-integrated metasurface provides an efficient recipe primarily for multifunctional meta-device, however it is challenging to synergize both linear polarization (LP) and circular polarization (CP) using a single meta-plate. Here, a multichannel full-space coding metasurface composed of interleaved shared-aperture meta-atom is proposed to achieve large information capacity by capsulating judiciously engineered high efficiency triple sub-elements (modes) in four-layer scheme. By rotating dual-gap split ring resonator and varying size of “L” type structure insulating by a metallic ring with electrostatic-analogue shielding effect, both Pancharatnam–Berry (PB) and dynamic phases are independently realized under CP and LP waves, respectively. Such an extraordinary insulating strategy completely suppresses crosstalk among three modes and unprecedentedly increases the capability in yielding kaleidoscopic wavefront control. To verify the significance, a proof-of-concept metadevice is devised and experimentally demonstrated with tri-channel wavefront manipulations, exhibiting reflective dual-vortex beam and Bessel beam for forward and backward CP wave, respectively at high frequency, while transmissive polarization beam splitting for 45°-LP wave at low frequency. Our finding in polarization-direction multiplexing is expected to generate great interest in electromagnetic integration with emerging degree of freedoms.

With rapid development of holography, metasurface-based holographic communication scheme shows great potential in development of adaptive electromagnetic function. However, conventional passive metasurfaces are severely limited by poor reconfigurability, which makes it difficult to achieve wavefront manipulations in real time. Here, we propose a holographic communication strategy that on-demand target information is firstly acquired and encoded via a depth camera integrated with modified YOLOv5s target detection algorithm, then transmitted by software defined radio modules with long term evolution at 5 GHz, and finally reproduced in the form of holographic images by spin-decoupled programmable coding metasurfaces at 12 GHz after decoding through modified Gerchberg–Saxton algorithm. Experiments are conducted to demonstrate the brand-new concept of optical information conversion to electromagnetic one via above intelligent scheme. Our strategy may open a novel avenue toward applications of near-field communication based on adaptive variation of electric field patterns (i.e. holographic images).

Camouflage is an important technology in various scenarios. Usually, this involves the visible compatibility of the background, which however is facile under infrared thermal radiation detection. The simultaneous visible and thermal camouflage are challenging because it requires full and decoupled manipulations of visible reflection and infrared emissivity using one single device, let alone to its adaptivity to complex environments. Here, we report a programmable, colored thermal camouflage at 3–5 μm and 8–14 μm based on mode coupling in phase-change In3SbTe2 materials. A series of industry-friendly colored multilayer thermal emitters are designed consisting of an anti-reflectance layer for structure coloration above a coupled nanocavity for IR modulation, which easily realizes the complete decoupled control of visible color and infrared emissivity. Our solution features independent structural visible colors in the full visible range and continuously programmable dual-band emissivity modulation with up to 90 % absolute tuning range. Our work facilitates near optimal camouflage and anti-counterfeiting solution for visible-infrared multi-band compatibility of complex environments under different temperatures and colored appearances.

Achieving high-efficient and low-power communication is pivotal yet very challenging in the emerging technologies. Unlike conventional backscatter communication system, we propose and demonstrate an amplitude-reconfigurable metasurface loaded with PIN diodes to build a front-back scattering communication transmitter, which features the exclusive advantages of full-space secondary modulation of the ambient signals with high energy utilization efficiency. Meanwhile, this device can eliminate the interference originated from the ambient source by polarization conversion in the transmission channel. At a modulation rate of 800 kbps and a distance of 80 m, our system can achieve distortion-free transmission of a picture with size of 200 × 200 pixels. In addition, multiple amplitude-shift-keying modulation is also realized by segmenting the metasurface to further increase the communication rate. Due to the advantages of high spectral efficiency and low energy consumption, this system can be widely used in future engineering applications for the internet of things, especially for smart home, agriculture environmental monitoring, wearable sensing and others.

Achieving multifunctional wavefront manipulations of waves with a flat and thin plate is pivotal for high-capacity communications, which however is also challenging. A multi-layer metasurface with suppressed mode crosstalk provides an efficient recipe primarily for circular polarization, but all multiple functionalities still are confined to locked spin states and modes. Here, a multifunctional metasurface with spin-decoupled full-space wavefront control is reported by multiplexing both linear momentum and frequency degree of freedom. We employed vertically cascaded quadrangular patches and crossbars to integrate both geometric and dynamic phases and realized four channels between two spin states and two frequencies in distinct scattering modes (transmission and reflection). For verification, a proof-of-concept metadevice with four-port wavefront manipulations is experimentally demonstrated, exhibiting distinct functionalities including spin- and frequency-dependent focusing, quad-beam radiation, anomalous reflections, and Bessel beam generation. Our finding of full-space spin-decoupled metasurfaces would be important for high-capacity communications, multifunctional radar detections, and other applications.

Electromagnetic vortex carries the orbital angular momentum, one of the most fundamental properties of waves. The order of such vortex can be unbounded in principle, thus facilitating high-capability wave technologies for optical communications, photonic integrated circuits and others. However, it remains a key challenge to generate the high-order vortex beams in a reconfigurable, broadband and cost-effective manner. Here, inspired by the balanced-ternary concept, we demonstrate the reconfigurable generation of order-controllable vortices via cascaded N-layer metasurfaces. We theoretically showed that 3N−1${3}^{N}-1$ different vortex modes can be generated by cascading N metasurfaces, each one serving as an individual vortex beam generator for the order of 3k${3}^{k}$ (k = 0,1,2 …, N−1$N-1$). As a proof-of-concept demonstration, a reconfigurable generation of 26 different vortex beams, with orders from 1 to 13 and from −1 to −13, is showcased in a broad millimeter-wave region by a cascade of 3 metasurfaces. Our method can be easily extended to vortex beam generator of arbitrary orders in a reconfigurable and easily implementable manner, paving a new avenue towards tremendous practical applications.

Camouflage is an important technology in various scenarios. Usually, this involves the visible compatibility of the background, which however is facile under infrared thermal radiation detection. The simultaneous visible and thermal camouflage are challenging because it requires full and decoupled manipulations of visible reflection and infrared emissivity using one single device, let alone to its adaptivity to complex environments. Here, we report a programmable, colored thermal camouflage at 3–5 μm and 8–14 μm based on mode coupling in phase-change In3SbTe2 materials. A series of industry-friendly colored multilayer thermal emitters are designed consisting of an anti-reflectance layer for structure coloration above a coupled nanocavity for IR modulation, which easily realizes the complete decoupled control of visible color and infrared emissivity. Our solution features independent structural visible colors in the full visible range and continuously programmable dual-band emissivity modulation with up to 90 % absolute tuning range. Our work facilitates near optimal camouflage and anti-counterfeiting solution for visible-infrared multi-band compatibility of complex environments under different temperatures and colored appearances. [ABSTRACT FROM AUTHOR]