Search

At present, various public health emergencies have forced a deeper study of measures to prevent infectious diseases. To prevent the spread of infectious diseases on large cruise ships, the use of negative pressure isolation cabins is an effective method. However, existing cruise ships rarely use negative pressure isolation cabins or use them with shortcomings such as unreasonable layout of air inlets, which do not effectively reduce the risk of infection for medical staff while isolating patients. To solve this problem, first, the method of active air interference and the principle of proximity of the fresh air outlet were examined in this paper, and four groups of optimization schemes were designed. Second, by analyzing the diffusion of droplets in three breathing modes (coughing, sneezing, and talking while wearing or not wearing a mask), the direction of droplets and the efficiency of pollutant discharge under the condition of coughing were compared. Finally, in this paper, the infection risk of contact transmission and aerosol transmission was optimized by using the linear quantitative evaluation method and MSDR method, respectively. The results showed that the auxiliary air intake layout of optimal scheme 2 can effectively reduce the risk of infection for medical personnel in negative pressure isolation cabins. This study provides a useful reference for the design and optimization of negative pressure isolation cabins in future cruise ships. [ABSTRACT FROM AUTHOR]

Bifunctional magnetic/fluorescent core-shell silica nanospheres (MNPs) encapsulated with the magnetic Fe3O4 core and a derivate of 8-amimoquinoline (N-(quinolin-8-yl)-2-(3-(triethoxysilyl) propylamino) acetamide) (QTEPA) into the shell were synthesized. These functional MNPs were prepared with a modified stöber method and the formed Fe3O4@SiO2-QTEPA core-shell nanocomposites are biocompatible, water-dispersible, and stable. These prepared nanoparticles were characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), thermoelectric plasma Quad II inductively coupled plasma mass spectrometry (ICP-MS), superconducting quantum interference device (SQUID), TG/DTA thermal analyzer (TGA) and Fourier transform infrared spectroscopy (FTIR). Further application of the nanoparticles in detecting Zn2+ was confirmed by the fluorescence experiment: the nanosensor shows high selectivity and sensitivity to Zn2+ with a 22-fold fluorescence emission enhancement in the presence of 10 μM Zn2+. Moreover, the transverse relaxivity measurements show that the core-shell MNPs have T2 relaxivity (r2) of 155.05 mM−1 S−1 based on Fe concentration on the 3.0 T scanner, suggesting that the compound can be used as a negative contrast agent for MRI. Further in vivo experiments showed that these MNPs could be used as MRI contrast agent. Therefore, the new nanosensor provides the dual modality of magnetic resonance imaging and optical imaging. [ABSTRACT FROM AUTHOR]

Based on the theory of porous electrodes and the properties of lithium iron batteries, an electrochemical‐thermal coupling model of a single cell was established. The model was mainly used to study the temperature rise and temperature distribution characteristics in different regions of lithium iron batteries under different working conditions. In addition, a heat dissipation comparison analysis was carried out for different types of liquid cold runners, the optimal runner scheme was selected, and a structural optimization analysis was carried out. The simulation results show that the lithium iron battery discharges under the same ambient temperature and different C rates, and the battery temperature continuously increases with C. The temperature rise is mainly affected by Joule heat, and when the lithium iron battery is discharged at the same C but different ambient temperatures, the temperature rise of the lithium iron battery shows a decreasing trend with the increase in ambient temperature in a certain temperature range. The serial flow channel solution induces the best thermal behavior. Using the response surface optimization analysis, the three independent variable factors at which the temperature equilibrium R reaches the largest value under the liquid cooling module model are the rectangular flow channel length‐to‐width ratio, flow rate, and thermal conductivity. [ABSTRACT FROM AUTHOR]

Byline: Shuwen Zhou, William Lawrance, Siqi Zhang Automatic concrete pouring is essential to lessen the operator's labour intensity and increase productivity. The concept of automatic pouring and semi-automatic pouring are introduced to the boom control system. The concrete pouring process and the kinematics of the boom sections were analysed, including the inverse kinematics problem. An interpolation method was applied to obtain the boom's pose according to the position of the end hose. Four linear displacement sensors were used to measure angular displacements, which simplified the configuration of the control system. When doing automatic pouring, the control system can automatically pour a long narrow field while the semi-automatic pouring system can keep the end hose moving horizontally on a large platform. A 3D simulation was programmed to simulate the process of automatic pouring and verify the control algorithm. The simulation result shows that the system can pour concrete on a long narrow field automatically and the booms movement is smooth.

Bifunctional magnetic/fluorescent core-shell silica nanospheres (MNPs) encapsulated with the magnetic Fe 3 O 4 core and a derivate of 8-amimoquinoline (N-(quinolin-8-yl)-2-(3-(triethoxysilyl) propylamino) acetamide) (QTEPA) into the shell were synthesized. These functional MNPs were prepared with a modified stöber method and the formed Fe 3 O 4 @SiO 2 -QTEPA core-shell nanocomposites are biocompatible, water-dispersible, and stable. These prepared nanoparticles were characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), thermoelectric plasma Quad II inductively coupled plasma mass spectrometry (ICP-MS), superconducting quantum interference device (SQUID), TG/DTA thermal analyzer (TGA) and Fourier transform infrared spectroscopy (FTIR). Further application of the nanoparticles in detecting Zn 2+ was confirmed by the fluorescence experiment: the nanosensor shows high selectivity and sensitivity to Zn 2+ with a 22-fold fluorescence emission enhancement in the presence of 10 μM Zn 2+ . Moreover, the transverse relaxivity measurements show that the core-shell MNPs have T2 relaxivity (r2) of 155.05 mM -1 S -1 based on Fe concentration on the 3.0 T scanner, suggesting that the compound can be used as a negative contrast agent for MRI. Further in vivo experiments showed that these MNPs could be used as MRI contrast agent. Therefore, the new nanosensor provides the dual modality of magnetic resonance imaging and optical imaging.