Search

Abstract: In this study, Nafion ionomer, as a kind of hyperdispersant, was added to polytetrafluoroethylene (PTFE) water dispersion system to suppress the size of PTFE particles in the ink of microporous layer (MPL). The agglomeration behavior of PTFE in ethanol and MPL were investigated by laser diffraction, dynamic light scattering (DLS) and metallurgical microscopes. The electronic resistance, pore size distribution, gas permeability and surface hydrophobic/hydrophilic properties were also characterized for prepared gas diffusion layers (GDLs). It was shown that PTFE water dispersion system suffered flocculating when dispersed in ethanol and this agglomeration behavior was reduced by employing Nafion ionomer. With the increase in the Nafion ionomer adopted in the MPL, not only the decreased hydrophobic property was shown in the MPL, but the decreased PTFE particle size was also achieved, which results in improved crosslink of carbon and pores themselves as well as the volume loss of pores in micron scale. The increased gas permeability and electronic conductivity of the GDL made the one employing the PTFE dispersion system with 1% Nafion content own its advantages as the cathode diffusion layer for a direct methanol fuel cell (DMFC) under near-ambient conditions. [Copyright &y& Elsevier]

Abstract: In present work, a 600h durability test and in situ measurements of water transport were carried out on a single direct methanol fuel cell (DMFC) at atmospheric pressure and 80°C. Effect of water transport on the single cell performance was investigated in detail, which indicated that the accumulated water in the hydrophobic micropores of the cathode gas diffusion layer (GDL) aggravated the cathode flooding, and consequently led to a temporary and reversible degradation of the cell performance. Further investigation revealed that cathode flooding could be alleviated by blowing the cathode with dry air for 150h at open circuit condition and the partially recovered cell performance within the durability could be obtained in consequence. Water analysis combined with the scanning electron microscopy (SEM), contact angle measurement and energy dispersive X-ray (EDX) was used to explore the characteristics of cathode GDL before and after the durability test. Results showed that the variation of the microstructure and hydrophobic properties for both sides of the cathode GDL is probably one of the inherent reasons for the irreversible degradation of the cell performance besides the electro-catalysts deterioration. [Copyright &y& Elsevier]

Abstract: The transport of methanol through Nafion® membrane in diffusion cell is investigated using the open circuit potential method at different initial methanol concentration solutions. A simple mathematical model based on quasi-steady-state diffusion for the transport of methanol across the membrane in a diffusion cell is developed to simulate the experimental data in order to measure the methanol permeability. The influence of the diffusion cell parameters and thickness of the membrane on the methanol permeability measurement has been evaluated and analyzed. By means of Maclaurin expansion technique, this model can be used to predict the deviation of methanol permeability determined by steady-state diffusion model. [Copyright &y& Elsevier]