Search

Large quantities of gas resources have been found in the Paleo-Mesozoic carbonate rocks in the Sichuan Basin. However, many wells cannot obtain high production in deep low porosity-permeability reservoirs. For this contribution, we provide a steerable pyramid method for identifying the fault damage zone in the Kaijiang–Liangping platform margin, which is infeasible by conventional seismic methods. The results show that steerable pyramid processing could enhance the seismic fault imaging and a series of NW-trending strike-slip faults are found along the trend of the carbonate platform margin. The steerable pyramid attribute presents distinct vertical and horizontal boundaries of the fault damage zone, and heterogeneous intensity of an un-through-going damage zone. The width of the fault damage zone is generally varied in the range of 100–500 m, and could be increased to more than 1000 m in the fault overlap zone, intersection area, and fault tips. Further, the fault damage zone plays a constructive role in the high gas production in the deep tight carbonate reservoir. The results suggest the steerable pyramid method is favorable for identifying the weak strike-slip faults and their damage zone. The width of the fault damage zone is closely related to fault displacement, and the much wider damage zone is generally influenced by the fault overlapping and interaction. The fractured reservoirs in the fault damage zone could be a new favorable exploitation domain in the Sichuan Basin. [ABSTRACT FROM AUTHOR]

The Middle-Upper Cambrian Xixiangchi Formation in the Sichuan Basin is regarded as an important reservoir with great potential for hydrocarbon exploration. It is previously indicated that the Xixiangchi carbonates have experienced extensive dolomitization, however, the origin of dolomitizing fluids and the dolomitization mechanism still remain uncertain. In this study, a set of petrographic and geochemical examinations, including rare earth elements (REE) and isotopic (C, O, and Sr) compositions were used to trace the origins of dolomitizing fluids and associated diagenetic processes. The petrographic examination revealed three types of matrix dolomites (D1, D2, D3) and one cement saddle dolomite (SD). These phases have crystal size ranges of less than 30 μm (very fine to fine crystals, D1), 30–100 μm (fine to medium crystals, D2), 100–300 μm (medium to coarsely crystalline dolomite, D3), and 0.3–4 mm (fracture filling cements, SD), respectively. D1 is characterized by non to very weak luminescence, weakly negative Ce anomalies (Ce/Ce* = 0.84 ± 0.02), strongly negative Eu anomalies (Eu/Eu* = 0.65 ± 0.03), and high 87Sr/86Sr ratios (0.71062 ± 0.00122). In combination with δ13C (−1.5‰ ± 0.2‰) and δ18O (−9.7‰ ± 0.5‰) compositions, D1 is interpreted to be formed by penecontemporaneous dolomitization in the near-surface environment with seawater as the dolomitizing fluid. In contrast, D2 is characterized by intercrystalline pores, dirty crystal surfaces, similar δ13C (−1.4‰ ± 0.4‰) compositions but higher δ18O (−8.9‰ ± 0.7‰) compositions, and lower 87Sr/86Sr ratios (0.70992 ± 0.00035), similar Ce anomalies (Ce/Ce* = 0.87 ± 0.04) and higher Eu anomalies (Eu/Eu* = 0.85 ± 0.04). The coarser D2 is regarded to be formed by the post-penecontemporaneous seepage-reflux dolomitization or by recrystallization of D1 dolomite in a near-surface or shallow burial environment. D3 is distinguished by a cloudy core with clear rims, showing slightly higher Eu anomalies (Eu/Eu* = 0.88 ± 0.02) and similar Ce anomalies (Ce/Ce* = 0.88 ± 0.02) than those of D1 and D2. Combined with the δ18O compositions (−10.4‰ ± 0.4‰) and 87Sr/86Sr ratios (0.70989 ± 0.00048), D3 is thought to be formed by the overgrowth or recrystallization of D1 and D2 dolomites in a shallow to moderate burial environment. The fractures filling SD dolomite consists of nonplanar and much coarser crystals with undulatory extinctions and brighter red luminescence. The lower δ18O (−11.1‰ ± 0.3‰) compositions, lower negative Eu anomalies (Eu/Eu* = 0.70 ± 0.01) of SD than the matrix dolomites, and similar Ce anomalies (Ce/Ce* = 0.83 ± 0.01) are indicative of hydrothermal dolomitization, with possible fluids associated with the magma during the period of Emei taphrogenic movement. In addition, the 87Sr/86Sr ratios (0.70941 ± 0.00003) of SD suggest probable origin from the coeval seawater partially. Therefore, SD dolomite is interpreted to be formed by hydrothermal dolomitization with mixed dolomitizing fluid of seawater and hydrothermal fluids. In summary, all the matrix dolomites have almost the same ΣREE concentrations and exhibit similar near-flat REE partition patterns with weak LREE enrichments, weakly negative Ce anomalies, and negative Eu anomalies. Such characteristics of REE compositions are indicative of similar evolved dolomitizing fluid, such as seawater or seawater- derived fluids. By contrast, SD dolomites have a different REE partition pattern with left-leaning characteristics, LREE depletions, and negative Eu anomalies, thus suggesting a different dolomitizing fluid source from the matrix dolomites. In addition, the development of intercrystalline pores associated with D2 dolomite makes it more likely to be a potential reservoir, indicating that the dolomitizing history of carbonate has a strong influence on the quality of potential dolomite reservoirs. [ABSTRACT FROM AUTHOR]

Deep-seated faults and folds of foreland basin systems have become important exploration targets in the recent years because they are crucial in controlling fluid migration and hydrocarbon accumulation. In this study, we analyzed the characteristics and formation history of these structures in the northwestern Sichuan Basin using recently acquired two-dimensional (2D) and three-dimensional (3D) seismic data. The seismic interpretation revealed that the thrust sheets, tectonic wedges, and foredeep were well developed in the northwestern Sichuan Basin from the mountain to the basin. Forward thrusts, fault-bend folds, and wedges are the main types of structures in the thrust sheets and tectonic wedges. The deep-seated faults and folds were easily recognized in the high-resolution 3D seismic data. The imbricate thrust faults that merged into detachment layers of the Lower Cambrian are the main types of structures in the foredeep, and they show a prominent strike-slip influence in the horizontal direction. The formation of these structures in the foredeep in the northwestern Sichuan Basin mainly endured two stages of thrusting, including those during the Middle-to-Late Triassic and Cenozoic. Based on the tectonic evolution and seismic data, we infer that these deep-seated faults and folds in the foredeep may have formed earlier than the northern Longmen Shan fold-and-thrust belts and they may have been initially active in the late of Early Triassic and reactive during the Cenozoic. Furthermore, evaporites in the Lower and Middle Triassic were crucial in forming these structures. The petroleum exploration data suggested that the deep-seated faults can facilitate hydrocarbon accumulation. The thrust faults in the foredeep were more likely to act as migration pathways for fluids instead of sealing barriers along the horizontal direction. The interconnected reservoirs of deep-seated folds possess a great potential to allow large-scale hydrocarbon accumulation. Our study provides a good example for evaluating the hydrocarbon exploration potential in the deeply buried area in the sedimentary basin. [ABSTRACT FROM AUTHOR]

The exploration of high production, natural gas wells (>106 m3/d) has been extremely successful in the Gaoshiti and Moxi areas of the Leshan–Longnvsi paleo‐uplift, in the west‐central Sichuan Basin. This paper focuses on the Sinian and Cambrian reservoirs from the Gaoshiti and Moxi areas, where a dataset of new trace elements in bitumen and potential source rock is reported and where hydrocarbon‐source correlation is attempted based on trace elements characteristics of the 12 potential source rocks and 22 bitumen samples. Results show that the bitumen from the three reservoirs can be distinguished from each other using trace element distribution patterns and redox‐ and provenance‐sensitive elemental ratios. Bitumen in the second and fourth members of the Sinian Dengying Formation were derived primarily from the third member of the source rocks of the Dengying Formation, which represents a self‐sourced paleo‐petroleum system. In contrast, bitumen in the reservoirs of the Cambrian Longwangmiao Formation is derived from the Cambrian Qiongzhusi Formation and third member of Dengying Formation. The trace element method used in this study improves our understanding of the complex hydrocarbon–source relation and confirm the potential target for petroleum exploration in the study area. [ABSTRACT FROM AUTHOR]

Abstract: Through comprehensive research on drilling, logging and core data of T2l1 1 sub-member, which is the major pay of the Leikoupo Formation in the transitional zone of the central and southern Sichuan Basin, the structural characteristics, distribution regularity and its major controlling factors of intra-platform shoal are studied. The major rocks of intra-platform shoal in T2l1 1 sub-member include oosparite, residual oolitic dolostone, sparrenite, residual doloarenite and sparry doloarenite, sparry bioclastic limestone and residual bioclastic dolostone, which constitute oolitic shoal, arene shoal and bioclastic shoal. The intra-platform shoal is characterized vertically by shallowing-upward sequences, and consists of three sedimentary units, namely shoal base, shoal core and shoal cap. Besides, three microfacies can be distinguished laterally, shoal core, shoal edge and intershoal sea. The variation of water depth and hydrodynamic conditions caused by sea level change control the characteristics and superposed pattern of shoal body. Meanwhile, the palaeogeomorphology with alternating uplifts and depressions defines the differential distribution and lateral combination pattern of intra-platform shoal body. [Copyright &y& Elsevier]

Deep marine carbonate oil and gas resources in the Sichuan Basin are currently key exploration areas. As an important tectonic thermal event, the Emeishan mantle plume has an important influence on the source rocks under the Middle-Lower Permian in the Sichuan Basin. Therefore, the better understanding of the effect of Emeishan basalt eruption on source rock is vital for the exploration of marine oil and gas resources. On the basis of the thermal history study of the Sichuan Basin, this study restored the thermal maturity of the algal dolomite of the Sinian (Ediacaran) Dengying Formation in the Sichuan Basin in normal evolution. Using the hydrocarbon generation potential variation method, the hydrocarbon generation and expulsion characteristics of normally evolved algal dolomite and algal dolomite affected by basalt eruption were calculated. Through comparison, the influence of the Emeishan mantle plume on the algal dolomite of the Sinian Dengying Formation is analyzed. The research indicates that the thermal effect of the Emeishan mantle plume promotes the maturation of algal dolomite, which leads to the shortening of the oil generation period and the early arrival of the gas generation peak. The main hydrocarbon expulsion period of the normally evolved algal dolomite should be from the end of the Triassic to the end of the Jurassic, while the main hydrocarbon expulsion period of the algal dolomite affected by basalt eruption was advanced to the end of Silurian to the end of Triassic. In the current period, due to the high maturity of algal dolomite, the Emeishan mantle plume has little impact on the total resources. • Influence of Emeishan mantle plume on hydrocarbon generation and expulsion characteristics of algal dolomite of Sinian Dengying Formation. [ABSTRACT FROM AUTHOR]