Search

The illegal burning of solid waste in residential stoves is an existing practice, but until now it has been completely disregarded as an emission source of atmospheric pollutants in many developed countries, including those in eastern Europe. Various types of solid waste (plastics, treated wood, plyboards, tyre, rag) serve as an auxiliary fuel in many households, in particular during the heating season. In this work, for the first time ever in atmospheric pollution studies, specific tracer compounds identified previously in controlled test burnings of different waste types in the laboratory were detected and quantified in ambient PM10 samples collected in five Hungarian and four Romanian settlements. Using the identified tracers and their experimentally determined relative emission factors, the potential contribution of illegal waste burning emissions to ambient PM10 mass concentrations was assessed. Our findings implied that the burning of polyethylene terephthalate (PET)-containing waste (food and beverage packaging, clothes) was predominant at all the locations, especially in north-eastern Hungary and Romania. There is substantial evidence that the burning of scrap furniture is also common in big cities in Hungary and Romania. Back-of-the-envelope calculations based on the relative emission factors of individual tracers suggested that the contribution of solid waste burning particulate emissions to ambient PM10 mass concentrations may be as high as a few percent. This finding, when considering the extreme health hazards associated with particulate emissions from waste burning, is a matter of serious public health concern. [ABSTRACT FROM AUTHOR]

The illegal burning of solid wastes in residential stoves is an existing practice yet until now it has been completely disregarded as an emission source of atmospheric pollutants in many developed countries including those in Eastern Europe. Various types of solid wastes (plastics, treated wood, plyboards, tyre, rag, etc.) serve as an auxiliary fuel in many households, in particular during the heating season. In this work, for the first time ever in atmospheric pollution studies, specific tracer compounds identified previously in controlled test burnings of different waste types in the laboratory were detected and quantified in ambient PM10 samples collected in 5 Hungarian and 4 Romanian settlements. Using the identified tracers and their experimentally determined relative emission factors the potential contribution of illegal waste burning emissions to ambient PM10 mass concentrations was assessed. Our findings implied that the burning of PET-containing waste (food and beverage packaging, clothes) was predominant at all locations, especially in North-Eastern Hungary and Romania. There is substantial evidence that the burning of scrap furniture is also common in big cities in Hungary and Romania. Back-of-the-envelope calculations based on the relative emission factors of individual tracers suggested that the contribution of solid waste burning particulate emissions to ambient PM10 mass concentrations may be as high as few percents. This finding, when considering the extreme health hazards associated with particulate emissions from waste burning, is a matter of serious public health concerns. [ABSTRACT FROM AUTHOR]

Air pollution, including PM2.5 concentration in Ulaanbaatar (capital of Mongolia) is a serious matter of concern. As the majority of households use coal in large areas of the city, indoor air quality is also posing a serious risk to human health. This study investigated the concentration of polycyclic aromatic compounds (PAHs) in indoor particulate matter (PM2.5) in 10 non-smoker households. Sampling was conducted in winter of 2018, between 27 January and 09 February. Concentrations of PM2.5 in the indoor air of households ranged between 62.8 and 324.8 µg m−3. Total concentration of PAHs also varied in a relatively wide range, between 46.2 and 175.7 ng m−3. Five-ring PAHs represented a considerably high fraction of total PAHs between 25 and 53%, benzo[b]fluoranthene (BbF) and benzo[a]pyrene (BaP) were the two predominant compounds within five-ring PAHs. Significant correlation was found between indoor and outdoor particulate matter levels in wintertime. Considering individual characteristic PAHs, heavier PAHs homologues (4- to 5-ring and 6-ring PAHs) were detected in all households, which suggested the influence of coal combustion and traffic exhaust. Health risk of children attributed to PAHs inhalation was assessed by taking into account the lifetime-average daily dose (LADD) and corresponding lifetime cancer risk. Lifetime average daily dose for children in only one household were slightly higher than health-based guideline level (1.0 × 10−5), defined by WHO, whereas LADD for adults and children of other households were within acceptable limit. The cancer risks from the exposure of children to air pollutants in all households except HH-3 were found high. In the Vibrio fischeri bioluminescence inhibition assay, according to the toxic unit (TU) values of indoor PM2.5 from ten households, all samples were classified as toxic. [ABSTRACT FROM AUTHOR]

The production and use of plastics is increasing rapidly as they are widely used in packaging, construction materials, furniture, foils, etc. As a consequence of their widespread use and often disposable nature, vast streams of plastic waste are continuously generated, a considerable fraction of which are combusted in households worldwide. In this paper, various types of commonly used plastics (PE, PET, PP, PU, PVC, PS, ABS) as well as treated wood samples (LDF, low-density fibreboard) and firewood were combusted separately in a test stove under controlled conditions. The particulates emitted during the combustion test were collected on filters, potential tracers for each waste type were identified by GC-MS, and their relative abundances were determined. The emission factor of 1,3,5-triphenylbenzene was found to be higher for polymers containing aromatic rings in their structure. The application of terphenyls and quaterphenyls as tracer compounds has also been investigated. The trimer of styrene was found to be a potential tracer for the combustion of polystyrene and/or styrene-containing copolymers. Novel tracers were proposed for the burning of PET and furniture plates (LDF), which are among the most widely used waste types burned in households. [ABSTRACT FROM AUTHOR]

The production and use of plastics increases rapidly as they are widely used in packaging, construction materials, furniture, foils, etc. As a consequence of their widespread use and often disposable character, vast streams of plastic wastes are continuously generated, a considerable fraction of which are combusted in households worldwide. In this paper, various types of commonly used plastics (PE, PET, PP, PU, PVC, PS, ABS), as well as treated wood samples (LDF) and firewood were combusted separately in a test stove under controlled conditions. The particulates emitted during the combustion test were collected on filters, and potential tracers for each waste type were identified by GC-MS, and their relative abundances were determined. The emission factor of 1,3,5-triphenylbenzene was found to be higher for polymers containing aromatic rings in their structure. The application of terphenyls and quarterphenyls as tracer compounds has also been investigated. The trimer of styrene was found to be a potential tracer for the combustion of polystyrene and/or styrene containing copolymers. Novel tracers were proposed for the burning of PET and furniture plates (LDF), which are among the most widely used waste types burned in households. [ABSTRACT FROM AUTHOR]

It is a common practice in developing countries and in some regions of Europe that solid wastes generated in households (e.g. plastic beverage packaging and other plastic wastes, textile wastes, fibreboards, furniture, tyres, and coloured-paper waste) are burned in wood- or coal-fired stoves during the winter months. In Europe, the types and volume of municipal waste burned in households is virtually unknown because these activities are illegal and not recorded, with the exception of a few media reports or court cases. Even though particulate emissions from illegal waste burning pose a significant hazard to human health due to the combination of excessive emission factors (EFs) and uncontrolled chemical composition, there is scarce information on the specific EFs for PM 10 and polycyclic aromatic hydrocarbons (PAHs) in the scientific literature. In this work, controlled combustion tests were performed with 12 different types of municipal solid waste, and particulate emissions were measured and collected for chemical analysis. Absolute EFs for PM 10 and PAHs as well as the benzo(a)pyrene (BaP) toxicity equivalent of the latter are reported for the first time for the indoor combustion of 12 common types of municipal solid waste that are frequently burned in households worldwide. It was found that the PM 10 emission factors from the combustion of wood-based waste samples were about twice that of firewood, whereas EFs in the range of 11–82 mg g -1 (a factor of 5–40 times higher than that of dry firewood under the same conditions) were obtained for different types of plastic waste. The latter were also found to emit exceptionally high quantities of PAHs, by a factor of 50–750 more than upon the combustion of dry firewood under the same conditions. Since the more toxic 4–6 ring PAHs were predominant in the particulate emission from plastic waste burning, BaP equivalent toxicity was up to 4100 times higher than that from wood combustion. [ABSTRACT FROM AUTHOR]

It is a common practice in the developing countries and in some regions of Europe that solid wastes generated in the households (e.g. plastic beverage packaging and other plastic wastes, textile wastes, fibreboards, furniture, tyres, and coloured paper waste) are burned in wood- or coal-fired stoves during the winter months. In Europe, the types and volume of municipal waste burned in households is virtually unknown because these activities are illegal and not recorded, with the exception of a few media reports or court cases. Even though particulate emissions from illegal waste burning pose an unprecedented hazard to human health due to the combination of excessive emission factors (EFs) and uncontrolled chemical composition, there is scarce information on the specific emission factors for PM10 and polycyclic aromatic hydrocarbons (PAHs) in the scientific literature. In this work, controlled combustion tests were performed with 12 different types of municipal solid waste and particulate emissions were measured and collected for chemical analysis. Absolute emission factors for PM10 and PAHs as well as the benzo(a)pyrene toxicity equivalent of the latter are reported for the first time for the indoor combustion of 12 common types of municipal solid waste that are frequently burned in households worldwide. [ABSTRACT FROM AUTHOR]

Objectives: Air quality in the stables is characterized by elevated level of dust and aeroallergens which are supposed to directly cause or exacerbate several respiratory disorders. The most often recognized problem is recurrent airway obstruction (RAO), previously known as chronic obstructive pulmonary disease (COPD). There is some indication that aeroallergens (among them endotoxins) may also cause inflammation in human airways and may exceed safe levels in stables. Monitoring studies have covered mainly the determination of the concentration of respirable particles and of culturable fungi and their toxins. However, these particles do not only directly affect the respiratory system, but might act as a carrier conveying toxic contaminants and biological agents such as bacteria. In a typical, 20-horse Hungarian stable, microbial community of respirable fraction of resuspended dust has been characterized to reveal if these particles convey hazardous pathogenic bacteria, posing risk to either horses or staff.Material and Methods: Resuspended dust was sampled using a mobile instrument. The instrument contains a PARTISOL-FRM model 2000 sampler that was operated at a flow rate of 16.7 l/min and a cyclone separator which collected the particulate matter with an aerodynamic size between 1 μm and 10 μm (PM1-10) fraction. Microbial taxa were identified by culture-independent next generation sequencing (NGS) of variable 16S ribosomal ribonucleic acid (rRNA) gene regions.Results: In total, 1491 different taxa were identified, of them 384 were identified to species level, 961 to genus level. The sample was dominated by common ubiquitous soil and organic material-dwelling taxa.Conclusions: Pathogens occurred at low abundance, and were represented by mostly facultative human pathogens, with the prevalence of Staphylococcus species. [ABSTRACT FROM AUTHOR]

The chemical properties of laboratory-generated tar ball (Lab-TB) particles produced from dry distillate (wood tars) of three different wood species in the laboratory were investigated by analytical techniques that had never been used before for their characterization. The elemental compositions of laboratory-generated tar balls (Lab- TBs) from three tree species were very similar to one another and to those characteristic of atmospheric tar balls (TBs) collected from the savanna fire during the SAFARI 2000 sampling campaign. The O=C and H= C molar ratios of the generated Lab-TBs were at the upper limit characteristic of soot particles. The Fourier transform infrared spectroscopy (FTIR) spectra of the generated Lab-TBs were very similar to one another as well and also showed some similarity with those of atmospheric humic-like substances (HULIS). The FT-IR measurements indicated that Lab-TBs have a higher proportion of aromatic structure than HULIS and the oxygen atoms of Lab-TBs are mainly found in hydroxyl and keto functional groups. Whereas Raman activity was detected in the starting materials of the Lab-TBs (wood tars) in the range of 1000-1800 cm-1, the Raman spectra of TBs were dominated by two pronounced bands with intensity maxima near 1580 (G band) and 1350 cm-1 (D band), indicating the presence of sp2-hybridized carbon structures and disorder in them, respectively. In the Py-GC-MS chromatograms of the Lab-TBs mostly aromatic compounds (aromatic hydrocarbons, oxygenated aromatics and heterocyclic aromatics) were identified in accordance with the results of Raman and FT-IR spectroscopy. According to organic carbon = elemental carbon (OC = EC) analysis using EUSAAR_2 thermal protocol, 22% of the total carbon content of Lab-TBs was identified as EC, contrary to expectations based on the current understanding that negligible if any EC is present in this subfraction of the brown carbon family. Our results suggest that spherical atmospheric TBs with high C=O molar ratios are closer to BC in many of their properties than to weakly absorbing HULIS. [ABSTRACT FROM AUTHOR]

Beta-attenuation monitors are used worldwide to monitor PM mass concentration with high temporal resolution. Hourly PM10 and PM2.5 dry mass concentrations are publicly available with the tacit assumption that water is effectively removed prior to the measurement. However, as both the filter material of the monitor and the aerosol particles are capable of retaining a significant amount of water even at low relative humidities, the basic assumption may not be valid, resulting in significant bias in reported PM10 and PM2.5 concentrations. Here we show that in PM10 measurement, particle-free air can produce apparent hourly average PM concentrations in the range of 13+21 μg m-3 under conditions of fluctuating relative humidity. Positive and negative apparent readings are observed with increasing and decreasing relative humidities, respectively. Similar phenomena have been observed when the instrument filter was previously loaded with atmospheric aerosol. As a result the potential measurement biases in hourly readings arising from the interaction with water may be in the range of 53...+69%. [ABSTRACT FROM AUTHOR]

Black carbon aerosols (BC) have been conventionally assumed to be the only light-absorbing carbonaceous particles in the red and near-infrared spectral regions of solar radiation in the atmosphere. Here we report that contrary to the conventional belief tar balls (a specific type of organic aerosol particles from biomass burning) do absorb red and near infrared radiation significantly. Tar balls were produced in a laboratory experiment and their chemical and optical properties were measured. The absorption of these particles in the range between 470 and 950 nm was measured with an aethalometer which is widely used to measure atmospheric aerosol absorption. We find that the absorption coefficient of tar balls at 880 nm is more than 10 % of that at 470 nm. The considerable absorption of red and infrared light by tar balls also follows from their relatively low absorption Ångström coefficient (and significant mass absorption coefficient) in the spectral range between 470 and 950 nm. Our results support previous finding that tar balls may play an important role in global warming. Due to the non-negligible absorption of tar balls in the infrared region the absorption measured in the field at higher wavelengths may not solely due to soot particles. [ABSTRACT FROM AUTHOR]

The climate-change and environmental literature, including that on aerosols, is replete with mention of black carbon (BC) and soot. The terms are used interchangeably in much of the literature, although BC and soot commonly have operational and source-based definitions, respectively, and reliable reference samples and aerosol standards do not exist for either one. The uncertainty about their exact chemical nature and properties can be decreased by materials-based measurement techniques and terminology. Here, we discuss ambiguities in common uses of BC and soot and propose the term ns-soot, where “ns” refers to carbon nanospheres, for a characteristic constituent of BC and soot. Based on its composition, morphology, and structure, we define ns-soot as particles that consist of nanospheres, typically with diameters <100 nm, that possess distinct structures of concentrically wrapped, graphene-like layers of carbon and with grape-like (aciniform) morphologies. We additionally propose that, because of their importance for climate modeling and health issues, distinctions are made among bare, coated, and embedded ns-soot particles. Copyright 2014 American Association for Aerosol Research [ABSTRACT FROM AUTHOR]

Diesel exhaust is one of the major sources of fine and ultrafine particulate matter in urban air. Toxicity of diesel-powered engine emissions has been quite widely assessed, however, much less information is available on their ecotoxicity. In our study the kinetic version of the Vibrio fischeri bioluminescence inhibition bioassay, based on the ISO 21338:2010 standard, was used to characterise the ecotoxicity of diesel-powered cars. The method is sensitive enough to test the ecotoxic effect of the emission of individual vehicles. In general, significant positive correlation was found between ecotoxicity (expressed as Toxic Unit /TU/values) and total carbon (TC) as well as between TU and polycyclic aromatic hydrocarbon (PAH) concentrations. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Abstract: Urban air quality is severely affected by traffic related particulate matter, including direct emissions from exhaust, brake pad, tire wear and road dust resuspended by vehicular motions. Deposited road dust can also be resuspended by wind force or other anthropogenic activities, and overall it may contribute up to 30% to urban PM10. A mobile resuspended road dust PM10 sampler was developed and constructed which simulates the effects of traffic or gusting winds on road surfaces and collects resuspended PM1−10 samples in a cyclone separator and PM1 samples on filters. The sampler was tested by collecting resuspended road dust at kerbside locations in Veszprém, Hungary. The collected PM1 and PM1−10 fractions were analysed by various analytical methods to show the potential of size-selective on-line sample collection combined with the chemical characterization of resuspended road dust. The main constituents of the resuspended road dust were crustal elements, and it was also possible to determine the mineral phase composition of PM1−10 dust which is generally not feasible from samples collected on filter substrate. The application of the sampling and analysis methods may facilitate the evaluation of resuspended road dust sources in cities as well as help constrain a better source apportionment of urban PM10. [Copyright &y& Elsevier]

Abstract: Atmospheric particulate matter with aerodynamic diameter less than 10μm (PM10) and 2.5μm (PM2.5) is now identified as one of the most dangerous pollutants on human health by the EU new directive on air quality (2008/50/CE). Although these primary pollutants are monitored in cities, little information is available on their ecotoxicity. In this paper a ‘whole-aerosol’ testing protocol is suggested based on the kinetic version of the Vibrio fischeri bioluminescence inhibition test. [Copyright &y& Elsevier]

Aerosols produced over forests impair visibility and may affect climate by scattering and absorbing solar radiation and by serving as cloud condensation nuclei. Here, we introduce, to our knowledge, a new route to secondary organic aerosol formation from isoprene and its gas-phase oxidation products, methacrolein and methacrylic acid, namely, multiphase acid-catalysed oxidation with hydrogen peroxide, a perfect analogue to atmospheric sulphate formation. We demonstrate that the formation of major secondary organic aerosol components that are present in natural forest aerosols collected at K-puszta, Hungary, during the summer of 2003, namely, 2-methyltetrols and 2,3-dihydroxymethacrylic acid, can be explained by this mechanism. [Copyright &y& Elsevier]