Search

Supplemental Figures

The piezoelectric materials, such as ceramics, crystals, and films, have wide applications in the mechanical industry, medical imaging, electronic information, and ultrasonic devices, etc. Generally, adding oxide dopants, or introducing new solid solutions to form the morphotropic phase boundary of the piezoelectric materials were common strategies to enhance the electric properties. In recent decades, rare-earth elements doped piezoelectric materials have attracted much attention due to their multifunctional performances combining piezoelectric and photoluminescence properties, which has potential applications in ultrasonics, electronics, automatic control, machinery and optoelectronic fields. An overview of the recent investigations and perspectives on rare-earth doped piezoelectric ceramics, single crystals, and films were presented.

A decrease of piezoelectric properties in the fabrication of ultra-small Pb(Mg1/3Nb2/3)&ndash, x%PbTiO3 (PMN&ndash, x%PT) for high-frequency (&gt, 20 MHz) ultrasonic array transducers remains an urgent problem. Here, PMN&ndash, 31%PT with micron-sized kerfs and high piezoelectric performance was micromachined using a 355 nm laser. We studied the kerf profile as a function of laser parameters, revealing that micron-sized kerfs with designated profiles and fewer micro-cracks can be obtained by optimizing the laser parameters. The domain morphology of micromachined PMN&ndash, 31%PT was thoroughly analyzed to validate the superior piezoelectric performance maintained near the kerfs. A high piezoresponse of the samples after micromachining was also successfully demonstrated by determining the effective piezoelectric coefficient (d33*~1200 pm/V). Our results are promising for fabricating superior PMN&ndash, 31%PT and other piezoelectric high-frequency (&gt, 20 MHz) ultrasonic array transducers.

Ultrasonic methods have been extensively developed in nondestructive testing for various materials and components. However, accurately extracting quantitative information about defects still remains challenging, especially for complex structures. Although the immersion technique is commonly used for complex-shaped parts, the large mismatch of acoustic impedance between water and metal prevents effective ultrasonic transmission and leads to a low signal-to-noise ratio(SNR). In this paper, a quantitative imaging method is proposed for complex-shaped parts based on an ice-coupled full waveform inversion (FWI) method. Numerical experiments were carried out to quantitatively inspect the various defects in a turbine blade. Firstly, the k-space pseudospectral method was applied to simulate ice-coupled ultrasonic testing for the turbine blade. The recorded full wavefields were then applied for a frequency-domain FWI based on the Limited-memory Broyden–Fletcher–Goldfarb–Shanno (L-BFGS) method. With a carefully selected iterative number and frequency, a successive-frequency FWI can well detect half wavelength defects. Extended studies on an open notch with different orientations and multiple adjacent defects proved its capability to detect different types of defects. Finally, an uncertainty analysis was conducted with inaccurate initial velocity models with a relative error of ±2%, demonstrating its robustness even with a certain inaccuracy. This study demonstrates that the proposed method has a high potential to inspect complex-shaped structures with an excellent resolution.

BackgroundHistologic studies have demonstrated that lipid content and its spatial distribution is related to plaque vulnerability. However, in vivo imaging is still limited. Photoacoustic imaging may provide novel in vivo insights into these lipid-rich plaques.ObjectivesThis study sought to examine whether intravascular photoacoustic tomography (IVPAT) allows localization and quantification of lipid content in atherosclerotic plaques.MethodsRabbits fed with a high-fat/high-cholesterol diet served as the atherosclerotic model. Catheter-based IVPAT was used to evaluate pixel-based lipid relative concentration (LRC) of the vessel wall. The aorta of 4 groups of rabbits (n = 12) were examined ex vivo with IVPAT after 0, 5, 10, and 15 weeks of a high-fat diet, respectively. Six rabbits underwent 3-dimensional (3D) IVPAT after 20 weeks of the high-fat diet. Three rabbits were examined in vivo using IVPAT without interruption of blood flow. Concentration-based lipid map and quantitative index were calculated. For subsequent histologic correlation, all specimens were evaluated with Oil Red O staining.ResultsCross-sectional LRC maps allowed visualization of concentration and depth information of lipid content in the atherosclerotic plaques. Lipid accumulation within plaque, assessed by the maximum LRC, mean LRC, and high lipid content area correlated to duration of a high-fat diet. Three-dimensional LRC maps enabled overall evaluation of focal plaques in an intact explanted aorta including spatial and structural features. In vivo–obtained LRC maps accurately showed the structure of lipid core with high contrast. Ex vivo and in vivo IVPAT results were highly consistent with histological results.ConclusionsIn an animal model, IVPAT allowed characterization of spatial and quantitative features of lipid-rich plaques.