Search

The article presents a study which proposes a calibration technique for deriving three-wavelength spectral sky radiances in Granada, Spain. The study applies calibration matrices in the study of multiple sky conditions including cloudless, overcast and partially cloudy. It also uses radiative transfer model in performing the quantitative and qualitative analysis of the aforementioned sky images.

The article discusses the influence of the calibration on experimental ultraviolet (UV) Index at a midlatitude site in Granada, Spain. It provides an overview of the instrumentation and data used in the study. It talks about the calibration methods used in this work to obtain experimental UV Index values. It also presents and discusses the application of the different methods for obtaining UV Index.

Hospitals present a widely recognized margin for energy conservation due to their elevated final energy use intensity. Specifically, operating rooms are among the functional areas with greatest energy demand in hospitals, given the stringent indoor conditions for patients and surgical staff. However, energy efficiency in surgical facilities has traditionally been overlooked by the scientific literature in favor of guaranteeing adequate air quality conditions. This paper assesses the potential energy savings that could be achieved in a surgical suite in a Spanish hospital by lowering the current ventilation rates to the lowest energy-demanding values recommended by the proper Spanish standard and other international codes. Likewise, the paper assesses the actual hygrothermal and ventilation conditions in the suite based on the results of a continuous monitoring campaign performed for a period of 12 days. Simulations undertaken with a dynamic energy model specifically developed and calibrated for this work revealed that the average energy intensity of the suite is 1021 kWh/m 2 /year (1685 kWh/m 2 /year for operating rooms), with 80% of the total annual thermal demand corresponding to periods of inactivity. In addition, energy savings between 40% and 80% are possible while complying with both national and international standards. [ABSTRACT FROM AUTHOR]

Copyright of Spanish Journal of Palaeontology is the property of Socieadad Espanola de Paleontologia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Wave reanalysis databases (WRDBs) offer important advantages for the statistical characterization of wave climate (continuous time series, good spatial coverage, constant time span, homogeneous forcing, and more than a 40-yr-long time series) and for this reason, they have become a powerful tool for the design of offshore and coastal structures. However, WRDBs are not quantitatively perfect and corrections using instrumental observations must be addressed before they are used; this process is called calibration. The calibration is especially relevant near the coast and in areas where the orography is complex, since in these places the inaccuracy of WRDB is evident because of the bad description of the wind fields (i.e., insufficient forcing resolution). The quantitative differences between numerical and instrumental data suggest that different corrections should be applied depending on the mean direction of the sea state. This paper proposes a calibration method based on a nonlinear regression problem, where the corresponding correction parameters vary smoothly along the possible wave directions by means of cubic splines. The correction of significant wave height is performed using instrumental data: (i) buoy records and/or (ii) satellite data. The performance of the method is illustrated considering data from different locations around Spain. [ABSTRACT FROM AUTHOR]

This paper presents the design, construction and testing of a new photodiode-based pyranometer for the visible spectral range (approx. 400 to 750 nm), whose principal characteristics are: accuracy, ease of connection, immunity to noise, remote programming and operation, interior temperature regulation, cosine error minimisation and all this at a very low cost, tens of times lower than that of commercial thermopile-based devices. This new photodiode-based pyranometer overcomes traditional problems in this type of device and offers similar characteristics to those of thermopile-based pyranometers and, therefore, can be used in any installation where reliable measurement of solar irradiance is necessary, especially in those where cost is a deciding factor in the choice of a meter. This new pyranometer has been registered in the Spanish Patent and Trademark Office under the number P200703162. [ABSTRACT FROM AUTHOR]

In this paper, the HBV-TEC hydrological model is presented. The development of this model version, aims to provide researchers and scholars with a stable and robust implementation of the HBV hydrological model based on the R programming language. To evaluate its performance, the HBV-TEC model was applied to three subcatchments of the Aguacaliente river catchment, an experimental catchment located in the province of Cartago, Costa Rica. Results suggest a satisfactory performance of the model for two subcatchments and an unsatisfactory performance of the remaining subcatchment; most of which could be attributed to unsufficient meteorological data along with a highly heterogeneous spatial rainfall-distribution. [ABSTRACT FROM AUTHOR]

In this paper, an experimental and numerical approach to the characterization of thermal bridges is presented. The need for this characterization was found within an experimental study in a 2 floor high façade. This façade was constructed with 3 concrete elements which were placed in it to produce a similar thermal bridge effect to the one created by floor slabs traditional building construction in Spain. Commonly applied thermal assessments perform one-dimensional heat transfer analysis over planar elements such as the façades studied in this experiment. However, it is well known that thermal bridges are locations in buildings where one-dimensional heat transfer analysis cannot be applied. This problem was approached by creating a numerical 2D thermal model which was calibrated against experimental data from several temperature and heat flux sensors which were located at specific points in the thermal bridge elements. [ABSTRACT FROM AUTHOR]

Abstract: Urban growth models developed in the second half of the 20th century have allowed for a better understanding of the dynamics of urban growth. Among these models, cellular automata (CA) have become particularly relevant because of their ability to reproduce complex spatial and temporal dynamics at a global scale using local and simple rules. In the last three decades, many urban CA models that proved useful in the simulation of urban growth in large cities have been implemented. This paper analyzes the ability of some of the main urban CA models to simulate growth in a study area with different characteristics from those in which these models have been commonly applied, such as slow and low urban growth. The comparison of simulation results has allowed us to analyze the strengths and weaknesses of each model and to identify the models that are best suited to the characteristics of the study area. Results suggest that models which simulate several land uses can capture better land use dynamics in the study area but need more objective and reliable calibration methods. [Copyright &y& Elsevier]

Featured Application: The methodology proposed in this manuscript makes it possible to improve the estimation of flood zones and their flow depth values in situations where there are no available bathymetric data of the channel (or they are scarce and do not allow for its shape reconstruction). It could improve flood risk assessment too. The accurate estimation of flood risk depends on, among other factors, a correct delineation of the floodable area and its associated hydrodynamic parameters. This characterization becomes fundamental in the flood hazard analyses that are carried out in urban areas. To achieve this objective, it is necessary to have a correct characterization of the topography, both inside the riverbed (bathymetry) and outside it. Outside the riverbed, the LiDAR data led to an important improvement, but not so inside the riverbed. To overcome these deficiencies, different models with simplified bathymetry or modified inflow hydrographs were used. Here, we present a model that is based upon the calibration of the Manning's n value inside the riverbed. The use of abnormally low Manning's n values made it possible to reproduce both the extent of the flooded area and the flow depth value within it (outside the riverbed) in an acceptable manner. The reduction in the average error in the flow depth value from 50–75 cm (models without bathymetry and "natural" Manning's n values) to only about 10 cm (models without bathymetry and "calibrated" Manning's n values), was propagated towards a reduction in the estimation of direct flood damage, which fell from 25–30% to about 5%. [ABSTRACT FROM AUTHOR]

After 5 years in orbit, the Global Precipitation Measurement (GPM) mission has produced enough quality-controlled data to allow the first validation of their precipitation estimates over Spain. High-quality gauge data from the meteorological network of the Spanish Meteorological Agency (AEMET) are used here to validate Integrated Multisatellite Retrievals for GPM (IMERG) level 3 estimates of surface precipitation. While aggregated values compare notably well, some differences are found in specific locations. The research investigates the sources of these discrepancies, which are found to be primarily related to the underestimation of orographic precipitation in the IMERG satellite products, as well as to the number of available gauges in the GPCC gauges used for calibrating IMERG. It is shown that IMERG provides suboptimal performance in poorly instrumented areas but that the estimate improves greatly when at least one rain gauge is available for the calibration process. A main, generally applicable conclusion from this research is that the IMERG satellite-derived estimates of precipitation are more useful (r2 > 0.80) for hydrology than interpolated fields of rain gauge measurements when at least one gauge is available for calibrating the satellite product. If no rain gauges were used, the results are still useful but with decreased mean performance (r2 ≈ 0.65). Such figures, however, are greatly improved if no coastal areas are included in the comparison. Removing them is a minor issue in terms of hydrologic impacts, as most rivers in Spain have their sources far from the coast. [ABSTRACT FROM AUTHOR]

Solar radiation () is a very important variable in agricultural meteorology, but it is measured at a very limited number of weather stations. In addition, data are usually low quality because of to sensor failure or lack of calibration. can be predicted from other meteorological measurements (e.g., air temperature), but the accuracy of these methods needs to be tested. In this work, the mechanistic model of Hargreaves-Samani, three modified versions of this model, a modified Bristow-Campbell equation, and the Mahmood-Hubbard model were evaluated at 56 sites in the Andalusian region in southern Spain. All of these methods use the daily temperature range of the air () to estimate . The estimated values of were compared with measurements of to check their suitability. The accuracy of the methods was primarily affected by the magnitude of , with larger resulting in a greater accuracy. Finally, the parameter of the Hargreaves-Samani equation () was adjusted to regional conditions using , improving the estimations of incoming solar radiation for a wide range. [ABSTRACT FROM AUTHOR]

A test bench has been developed for the magnetic measurements on the Phase Shifters for E-XFEL. It will be part of the Spanish in-kind contribution to this new research facility. [ABSTRACT FROM PUBLISHER]

This work summarizes the activities carried out by the SMOS (Soil Moisture and Ocean Salinity) Barcelona Expert Center (SMOS-BEC) team in conjunction with the CIALE/Universidad de Salamanca team, within the framework of the European Space Agency (ESA) CALIMAS project in preparation for the SMOS mission and during its first year of operation. Under these activities several studies were performed, ranging from Level 1 (calibration and image reconstruction) to Level 4 (land pixel disaggregation techniques, by means of data fusion with higher resolution data from optical/infrared sensors). Validation of SMOS salinity products by means of surface drifters developed ad-hoc, and soil moisture products over the REMEDHUS site (Zamora, Spain) are also presented. Results of other preparatory activities carried out to improve the performance of eventual SMOS follow-on missions are presented, including GNSS-R to infer the sea state correction needed for improved ocean salinity retrievals and land surface parameters. Results from CALIMAS show a satisfactory performance of the MIRAS instrument, the accuracy and efficiency of the algorithms implemented in the ground data processors, and explore the limits of spatial resolution of soil moisture products using data fusion, as well as the feasibility of GNSS-R techniques for sea state determination and soil moisture monitoring. [ABSTRACT FROM AUTHOR]

The article presents a study on the influence of using one-step and two-steps method on the experimental ultraviolet index (UVI) measured by a YES UVB-1 radiometer located in Granada, Spain for 2006-2009. Also, the study analyzes the deviation from the UVI values taken from the application of the calibration factors. Based on results, absolute mean differences between measured and modeled UVI data of the methods indicate an excellent performance for obtaining UVI data.

The article discusses a study on the ROFLEX system which was deployed in Spain for in situ detection of atmospheric iodine atoms and molecules based on resonance and off-resonance fluorescence caused by lamp emission. It mentions its combination of robustness, light weight and efficient excitation of radio-frequency discharge light sources with high sensitivity photon calculation. It also notes the achievement of an iodine fluorescence calibration through molecular quantitative detection.

Numerical modeling of dredged pits is conducted to investigate the hydrodynamic and morphodynamic interaction in offshore sand extractions. Based on an analytical formulation, a semianalytical numerical model (MEMPITS) has been developed to study the morphodynamic evolution of offshore (ho . 20 m) sand borrow areas. The numerical model has been applied to study the morphodynamic evolution of two offshore sand borrow areas in the Balearic Islands (Spain). Field data allowed a detailed characterization of the evolution of the sandpits. Time series of local hydrodynamics have been obtained using generation models (hindcast) combined with local wave and flow models. A verification of the simple model has been carried out using relatively slight adjustments to the calibration factors. The simple model provides good estimates of the infill rate and migration velocities of the offshore pits on the scale of years. This semianalytical tool allows a quick systematic investigation of the physical mechanisms as well as a etailed sensibility analysis regarding the pit design parameters. These parameters include location (water depth), pit length, width, depth, and orientation with respect to the mean flow. A nondimensional analysis based on the model is also carried out to explore the role of the different variables involved in the evolution of offshore sandpits. Based on the field data and the nondimensional analysis, some basic design recommendations for offshore sandpits are proposed. [ABSTRACT FROM AUTHOR]

Four rectangular sluice gates were calibrated for submerged-flow conditions using nearly 16,000 field-measured data points on Canal B of the B-XII irrigation scheme in Lebrija, Spain. Water depth and gate opening values were measured using acoustic sensors at each of the gate structures, and the data were recorded on electronic data loggers. Several gate calibration equations were tested and it was found that the rectangular sluice gates can be used for accurate flow measurement. The Energy-Momentum (E-M) equations proved to be sound. The calibration of the contraction coefficient, to be used in the energy equation, allowed good estimations of the discharge for three of the four gates studied. The gate for which the E-M method did not perform satisfactorily was located at the head of the canal with a unique nonsymmetric approach flow condition. Alternatively, we investigated the performance of the conventional discharge equation. The variation of the discharge coefficient, Cd, with the head differential, Δh, and the vertical gate opening, w, suggests that Cd be expressed as a function of these two variables. For the sluice gates considered in this study, the best empirical fit was obtained by expressing Cd as a parabolic function of w, although an exponential expression tested previously by other writers also produced satisfactory results. The greatest uncertainty in the variables considered in this study was in the calculated coefficient of discharge, and based on the uncertainty analysis, it is possible to quantify the uncertainty in the estimated discharge through a calibrated sluice gate. The discharge uncertainty in each of the four gates in this study decreases with increasing gate opening, and it decreases slightly with increasing head differentials. [ABSTRACT FROM AUTHOR]

Errors in the estimation of CO2 surface exchange by open-path eddy covariance, introduced during the removal of density terms [Webb et al. Quart J Roy Meteorol Soc 106:85–100, (1980) - WPL], can happen both because of errors in energy fluxes [Liu et al. Boundary-Layer Meteorol 120:65–85, (2006)] but also because of inaccuracies in other terms included in the density corrections, most notably due to measurements of absolute CO2 density (ρ c ). Equations are derived to examine the propagation of all errors through the WPL algorithm. For an open-path eddy covariance system operating in the Sierra de Gádor in south-east Spain, examples are presented of the inability of an unattended, open-path infrared gas analyzer (IRGA) to reliably report ρ c and the need for additional instrumentation to determine calibration corrections. A sensitivity analysis shows that relatively large and systematic errors in net ecosystem exchange (NEE) can result from uncertainties in ρ c in a semi-arid climate with large sensible heat fluxes ( H s ) and (wet) mineral deposition. When ρc is underestimated by 5% due to lens contamination, this implies a 13% overestimation of monthly CO2 uptake. [ABSTRACT FROM AUTHOR]

Good air quality is essential for both human beings and the environment in general. The three most harmful air pollutants are nitrogen dioxide (NO2), ozone (O3) and particulate matter. Due to the high cost of monitoring stations, few examples of this type of infrastructure exist, and the use of low-cost sensors could help in air quality monitoring. The cost of metal-oxide sensors (MOS) is usually below EUR 10 and they maintain small dimensions, but their use in air quality monitoring is only valid through an exhaustive calibration process and subsequent precision analysis. We present an on-field calibration technique, based on the least squares method, to fit regression models for low-cost MOS sensors, one that has two main advantages: it can be easily applied by non-expert operators, and it can be used even with only a small amount of calibration data. In addition, the proposed method is adaptive, and the calibration can be refined as more data becomes available. We apply and evaluate the technique with a real dataset from a particular area in the south of Spain (Granada city). The evaluation results show that, despite the simplicity of the technique and the low quantity of data, the accuracy obtained with the low-cost MOS sensors is high enough to be used for air quality monitoring. [ABSTRACT FROM AUTHOR]

Hydrological models are increasingly used for studying watershed behavior and its response to past and future events. The main objective of this study was to conduct a sensitivity analysis of the MOHID-Land model and identify the most relevant parameters/processes influencing river flow generation. MOHID-Land is a complex, physically based, three-dimensional model used for catchment-scale applications. A reference simulation was implemented in the Ulla River watershed, northwestern Spain. The sensitivity analysis focused on sixteen parameters/processes influencing water dynamics at that scale. River flow generation was influenced by the resolution of the simulation grid, soil water infiltration, and crop evapotranspiration. Baseflow was affected by soil hydraulic properties, the depth of the soil profile, and the dimensions of the river cross-sections. Peak flows were mostly constrained by Manning's coefficient in the river network, as well as the dimensions of the river cross-sections. The MOHID-Land model was then used to simulate daily streamflow during a 10-year period (2008−2017). Model simulations were compared against measured data at four hydrometric stations characterizing the natural flow regime of the Ulla River, resulting in coefficients of determination (R2) from 0.56 to 0.85; ratios of the standard deviation of the root mean square error to observation (RSR) between 0.4 and 0.67, and Nash and Sutcliffe model efficiency (NSE) values ranging from 0.55 to 0.84. The MOHID-Land model thus has the capacity to reproduce watershed behavior at a daily scale with reliable accuracy, constituting a powerful tool to improve water governance at the watershed scale. [ABSTRACT FROM AUTHOR]

Process-based crop models such as AquaCrop are useful for a variety of applications but must be accurately calibrated and validated. Sugar beet is an important crop that is grown in regions under water scarcity. The discrepancies and uncertainty in past published calibrations, together with important modifications in the program, deemed it necessary to conduct a study aimed at the calibration of AquaCrop (version 6.1) using the results of a single deficit irrigation experiment. The model was validated with additional data from eight farms differing in location, years, varieties, sowing dates, and irrigation. The overall performance of AquaCrop for simulating canopy cover, biomass, and final yield was accurate (RMSE = 11.39%, 2.10 t ha−1, and 0.85 t ha−1, respectively). Once the model was properly calibrated and validated, a scenario analysis was carried out to assess the crop response in terms of yield and water productivity to different irrigation water allocations in the two main production areas of sugar beet in Spain (spring and autumn sowing). The results highlighted the potential of the model by showing the important impact of irrigation water allocation and sowing time on sugar beet production and its irrigation water productivity. [ABSTRACT FROM AUTHOR]

Calibration of conceptual rainfall–runoff models (CRRM) for water-resource assessment (WRA) is a complicated task that contributes to the reliability of results obtained from catchments. In recent decades, the application of automatic calibration techniques has been frequently used because of the increasing complexity of models and the considerable time savings gained at this phase. In this work, the traditional Rosenbrock (RNB) algorithm is combined with a random sampling method and the Latin hypercube (LH) to optimize a multi-start strategy and test the efficiency in the calibration of CRRMs. Three models (the French rural-engineering-with-four-daily-parameters (GR4J) model, the Swedish Hydrological Office Water-balance Department (HBV) model and the Sacramento Soil Moisture Accounting (SAC-SMA) model) are selected for WRA at nine headwaters in Spain in zones prone to long and severe droughts. To assess the results, the University of Arizona's shuffled complex evolution (SCE-UA) algorithm was selected as a benchmark, because, until now, it has been one of the most robust techniques used to solve calibration problems with rainfall–runoff models. This comparison shows that the traditional algorithm can find optimal solutions at least as good as the SCE-UA algorithm. In fact, with the calibration of the SAC-SMA model, the results are significantly different: The RNB algorithm found better solutions than the SCE-UA for all basins. Finally, the combination created between the LH and RNB methods is detailed thoroughly, and a sensitivity analysis of its parameters is used to define the set of optimal values for its efficient performance. [ABSTRACT FROM AUTHOR]

Different types of measuring errors can increase the uncertainty of solar radiation measurements, but most common quality control (QC) methods do not detect frequent defects such as shading or calibration errors due to their low magnitude. We recently presented a new procedure, the Bias-based Quality Control (BQC), that detects low-magnitude defects by analyzing the stability of the deviations between several independent radiation databases and measurements. In this study, we extend the validation of the BQC by analyzing the quality of all publicly available Spanish radiometric networks measuring global horizontal irradiance (9 networks, 732 stations). Similarly to our previous validation, the BQC found many defects such as shading, soiling, or calibration issues not detected by classical QC methods. The results questioned the quality of SIAR, Euskalmet, MeteoGalica, and SOS Rioja, as all of them presented defects in more than 40% of their stations. Those studies based on these networks should be interpreted cautiously. In contrast, the number of defects was below a 5% in BSRN, AEMET, MeteoNavarra, Meteocat, and SIAR Rioja, though the presence of defects in networks such as AEMET highlights the importance of QC even when using a priori reliable stations. [ABSTRACT FROM AUTHOR]