Search

Macro-porous poly(lauryl acrylate) cryogel sheets as oil-sorbents were prepared through UV-radiation cryo-polymerizations in 1, 4-dioxane at low temperatures (−5, −2 and 0 °C) within 30 min. The influences of total monomer concentration, crosslinking monomer amount and polymerization temperature on the formation of cryogels were studied. The chemical structure and porous morphology were characterized through the techniques of Fourier transform infrared spectroscopy, thermal gravimetric analysis, contact angle measurement and scanning electron microscopy, confirming the features of high hydrophobicity, macro-porosity and good thermal stability. As well, the comparison between conventional gels prepared at room temperature and cryogels at lower temperatures was made, showing the higher rate of cryo-polymerization than conventional polymerization under the same UV-radiation condition. The swelling investigation was carried out with several organic solvents and oils. Enhanced performance of oil absorption was observed for those cryogels considering the absorption capacity and absorption rate. Variation of initiator amount and acrylate monomers could also modulate the absorption capacity. Those cryogel oil-sorbents exhibited wide adaptability, good reusability and high-temperature tolerance. Thus, this rapid and low-cost fabrication opens out a novel pathway to prepare efficient oil-sorbents used in waste water treatment. • Polyacrylate cryogels were prepared under UV-radiation within 30 min. • Cryogel morphology were modulated with various parameters, principally temperature. • Macro-porosity and pore-wall feature are extremely important to oil-sorbent capacity. • Oil-sorbents have wide adaptability, good reusability and high-temperature tolerance. [ABSTRACT FROM AUTHOR]