Search

Although helical electrodes have been proven to improve the EDM (electrical discharge machining) speed of small holes, there are few studies on the morphological characteristics of the machined small holes and the influence of electrode structures. In this paper, the influence of the helical electrode structure on the machining effect is studied by the method of orthogonal experiment, and the internal mechanism of the influence of the helical electrode on the machining is explained by the method of CFD (computational fluid dynamics) simulation. The results show that the larger depth and width of the helical groove and the helix angle of 60° are beneficial to increase the machining speed and reduce the relative loss rate, and at the same time, avoid serious defects in the small hole morphology. These conclusions provide a valuable reference for future researchers to choose the reasonable structure of the helical electrode, which is of great significance. [ABSTRACT FROM AUTHOR]

Tool electrode wear varying with different materials in electrical discharge machining (EDM) is unavoidable, thus inevitably reducing the machining quality and accuracy of microstructures. To convert this disadvantageous phenomenon into a beneficial process, the paper proposed a wear-variation EDM (WV-EDM) approach to fabricate a laminated disc electrode (LDE) with stable-shape micro channels on the outer edge surface; this electrode was subsequently used to machine micro grooves on workpieces by EDM. The WV-EDM formation of the LDE, the relationship between relative volume wear rate of the disc foils and the machining depth, and flow field distribution in the machining gap of the LDE during processing were investigated. The results show that the method proposed herein could reliably produce LDEs with stable micro channels on the outer edge surfaces that could subsequently be employed to continuously machine micro groove arrays with the same machining depth on the same material workpiece by EDM, and especially LDE reshaping was unnecessary. Additionally, the "pump effect" of the vortex, located in the flow field between micro channels on the LDE and workpiece, was beneficial for debris removal. Using the proposed method, micro groove arrays and columnar microstructures were successfully fabricated on Ti–6Al–4V alloy workpieces. [ABSTRACT FROM AUTHOR]