Search

Abstract: The aim of this paper is to contribute to the knowledge about energy use in residential buildings. Field measurements were carried out in 57 electrically heated Swedish single-family houses, where the total energy use (i.e. electricity use for space heating, household electricity and electricity use for hot water production), indoor temperatures and water use were recorded during four winter days. Some of the findings were that differences for households’ total energy use of similar houses were large. The characteristics of load curves clearly differ between weekdays and weekend days. The water use differs greatly for the households. This paper is part of a larger project where time use diaries were used in order to further link the energy use to residents’ every day energy related behaviours. To get a better understanding of the energy use in our homes is a prerequisite to be able to both recognise the problems as well as the potentials of reaching energy goals of our society, leading to a decreased impact on the environment from the building sector. [Copyright &y& Elsevier]

Abstract: Energy use in the built environment represents a large part of total energy use in Sweden and is one important sector where energy conservation needs to be significantly improved in order to meet the national implementation of the European goals. One key question that needs to be investigated in relation to these goals is the performance and implementation of passive or low-energy houses. This paper presents results and an evaluation of a newly built house in an area with passive houses in Linköping, Sweden. Nine passive houses were built with the aim to be energy efficient, with an annual space heating demand of 21kWh/m2, and at the same time to have the same visual appearance as any other building in the surrounding area. This study evaluates the energy performance of a residential area with low-energy buildings based on Building Energy Simulation (BES) (IDA ICE 4), and measurements from the real object. Both annual and hourly validation is performed using room by room modeling and internal heat gains. A novel approach to internal heat gain modeling is presented using time-use data (TUD). The results show possible improvements in the design, the building envelope and in the heating control. [Copyright &y& Elsevier]