Search

In this study, a novel amphiphilic flocculant TP-ADL was synthesized using acrylamide, methacryloxyethyltrimethyl ammonium chloride and lauryl acrylate as monomers through UV-light-initiating template copolymerization technology. Copolymerization conditions were optimized towards higher intrinsic viscosity and conversion rate. The Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy (NMR) analysis confirms the functional groups composition in TP-ADL, and the thermogravimetric (TGA) analysis indicates its good thermal stability. Furthermore, the detailed 1H NMR and TGA analysis confirms the microblock structure in polymer chain. The amphiphilic rheological characteristics of copolymer were detected according to apparent viscosity. TP-ADL displayed superior flocculation efficiency towards oily wastewater in terms of oil and turbidity removal rate, and zeta potential. The median floc size (d50) and fractal dimension (Df) results indicate a large and compact floc structure. The synergistic effect between cationic microblock structure and inter-molecular hydrophobic association is the main reason for the better treatment efficiency. [ABSTRACT FROM AUTHOR]

PO43- and SiO32- are often used as modifier to improve stability and aggregating ability of the iron-base coagulants, however, there are few reports about their detailed comparison between the coagulation performance and mechanisms. In this study, three coagulants—polyferric phosphoric sulfate (PFPS), polysilicon ferric sulfate (PFSS), and polyferric sulfate (PFS) were synthesized; their structure and morphology were characterized by Fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and Scanning electron microscope (SEM). Alkali titration and Ferron species analysis were employed to investigate the hydrolysis performance and species distribution. Jar test was conducted to measure their coagulation behaviors at different dosage, pH, and temperatures in which the flocs properties were measured. The results showed that a number of new compounds were formed due to the presence of PO43- and SiO32-. Moreover, PFPS and PFSS had similar level in Fea as well as Feb. Among them, PFPS produced more multi-core iron atoms polymer and content of Feb, and the formed flocs were larger and denser. It exhibited superior coagulation performance in terms of turbidity reduction, UV254 removal and residual ferric concentration. Jar test and floc breakage/regrowth experiments indicated other than charge neutrality, the dominated mechanism involved in PFSS was the adsorption between polysilicic acid and solution particle, while PFPS was sweeping, entrapment/adsorption resulting from larger polymer colloid of Fe-P chemistry bond. [ABSTRACT FROM AUTHOR]

In this study, a template polymer with anionic microblock structure was successfully synthesized through ultrasonic initiated template copolymerization (USTP) by using sodium allylsulfonate (SAS) and acrylamide (AM) as monomers, poly diallyl dimethyl ammonium chloride (polyDADMAC) as template, and 2,2′-azobis [2-(2-imidazolin-2-yl) propane] dihydrochloride (VA-044) as initiator. The anionic polyacrylamide (APAM-T) flocculant was characterized by Fourier transform infrared spectroscopy (FTIR), 1H nuclear magnetic resonance spectroscopy (1H NMR), and scanning electron microscopy (SEM). Furthermore, the X-ray photoelectron spectroscopy (XPS) was conducted to measure the elemental composition. The results of XPS and 1H NMR spectroscopy analysis indicated the existence of anionic microblock structure in APAM-T. Besides, the copolymerization was revealed to follow the self-assembly mechanism by analyzing the association constant (K M). The flocculation performance was evaluated by turbidity and zeta potential in the flocculation tests. The results indicated that the APAM-T with microblock structure enhanced the charge neutralization and bridging adsorption capacity, thus improving the flocculation performance. In the floc particle size distribution and fragmentation and reflocculation experiments, the floc corresponding to APAM-T had the strongest regeneration ability after fragmentation, which further confirmed the criticality of the microblock structure in enhancing the flocculation performance. Compared with existing studies, this study not only demonstrated a novel synthesis method, but also found that the microblock structure could significantly improve its treatment efficiency and effectiveness, providing a new theoretical basis and practical application path for wastewater treatment technology. [Display omitted] • Anionic polyacrylamide with regular microblock structure was synthesized. • The reactivity and copolymerization degree were enhanced by microblock structure. • The turbidity removal of APAM-T for hematite wastewater could reach 98.22 %. • The charge neutralization and bridging adsorption capacity of APAM-T were enhanced. [ABSTRACT FROM AUTHOR]

Carboxylated chitosan (CPCTS) is used as substrates in the design and synthesis of CPCTS-based flocculants through UV-initiated polymerization techniques. The synthesized flocculants are applied to remove Cr and Ni ions from chromic acid lotion and electroplating wastewater through two-stage flocculation. This study investigates the effect of flocculant dosage, pH, reaction time, and stirring speed on the removal efficiency of Cr and Ni ions. Results indicated that the total Cr removal ratios by CPCTS-graft-polyacrylamide-co-sodium xanthate (CAC) and CPCTS-graft-poly [acrylamide-2-Acrylamido-2-methylpropane sulfonic acid] (CPCTS-g-P(AM-AMPS)) are 94.7% and 94.6%, respectively. The total Ni removal efficiencies by CAC and CPCTS-g-P(AM-AMPS) are 99.3% and 99.4%, respectively. The two-stage flocculation with CPCTS-based flocculants could reduce the total concentrations of Cr and Ni to 1.0 mg/L and 0.5 mg/L, respectively. The relationship of removal capacity and structural properties between the flocculants with different functional groups is established through Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, and X-ray diffraction. The micro-interfacial behavior between the colloidal particles and the solution during the integrated chelation–flocculation are elucidated. Thus, CPCTS-based flocculants could be a potential material for the removal of high amounts of Cr and Ni ions in industrial wastewater. Image 1 • Chitosan based flocculants with xanthate and sulfonic acid group were designed and synthesized. • Flocculation process was used to treat industrial wastewater containing Cr and total Ni. • Rapid Removal and Separation of Cr and total Ni was obtained by CAC. • The micro-interfacial behavior during the integrated chelation–flocculation was elucidated. • Chitosan based flocculants showed an excellent potential capacity for removing heavy metals. [ABSTRACT FROM AUTHOR]