Search

Dye treatments in industrial wastewaters causes numerous obstacles while stains exist normally constant to radiance as well as corrosion and thus, aerobic digestion. The removal of Congo red dye in low concentration from acidic aqueous solution is the main objective of present work. Synthesis of Acrylamide (AM), Diallyl Dimethyl Ammonium Chloride Propylene (DADMAC) and Acryloyloxyethyltrimethyl ammonium chloride (DAC) (PADD) were carried by UV-initiated polymerization, and polyacrylamide (PAM) as contrast sample. Several analytical techniques existed employed to characterization and demonstrate the productive synthesize of PADD, characteristics and composition of the flocculants was studied through FTIR, 1HNMR while thermal stability of PADD in addition PAM was studied by TGA. In addition, the strong structure of surface morphology was confirmed by scanning electronic microscopy (SEM). Established effective process was used to evaluate the flocculation behaviour with special characteristics. Measuring the parameters, dosage of flocculants, flocculation time, temperature, flocculants initial concentration of Congo red dye, stirring speed and zeta potential in removal of Congo red efficiently in acid aqueous environment. These factors presented that in the condition of strong acidity, low concentration and charge neutralization, the adsorption and bridging effect of PADD on Congo red dye was dominant. Under the idyllic conditions concentration of dye 3.0 mg L−1 and pH 6.0, the maximum removal rates of Congo red dye have been 96.45% and 81.10%, PADD and PAM, respectively. PADD provides a scientific basis platform for the removal of Congo red dye efficiently. [ABSTRACT FROM AUTHOR]

In this study, a novel amphiphilic flocculant TP-ADL was synthesized using acrylamide, methacryloxyethyltrimethyl ammonium chloride and lauryl acrylate as monomers through UV-light-initiating template copolymerization technology. Copolymerization conditions were optimized towards higher intrinsic viscosity and conversion rate. The Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy (NMR) analysis confirms the functional groups composition in TP-ADL, and the thermogravimetric (TGA) analysis indicates its good thermal stability. Furthermore, the detailed 1H NMR and TGA analysis confirms the microblock structure in polymer chain. The amphiphilic rheological characteristics of copolymer were detected according to apparent viscosity. TP-ADL displayed superior flocculation efficiency towards oily wastewater in terms of oil and turbidity removal rate, and zeta potential. The median floc size (d50) and fractal dimension (Df) results indicate a large and compact floc structure. The synergistic effect between cationic microblock structure and inter-molecular hydrophobic association is the main reason for the better treatment efficiency. [ABSTRACT FROM AUTHOR]

P(AM-DMC) (PAD) was synthesized by ultraviolet- (UV-) initiated copolymerization with methacryloxyethyl trimethyl ammonium chloride (DMC) and acrylamide (AM) as the monomers and initiator 2,2-azobis [2-(2-imidazolin-2-yl) propane] dihydrochloride (VA-044) as the photoinitiator. Parameters that affect the molecular weight were reviewed by using the single-factor approach. The results showed that the molecular weight (MW) of PAD could come to 7.88 × 106 Da with the optimum polymerization conditions as follows: monomer concentration of 30%, monomer mass ratio m(AM) : m(DMC) of 3 : 1, initiator concentration of 0.6‰, illumination time of 80 min, solution pH value of 4.5, and incident light intensity of 1000 μW cm−2. The PAD was represented by several instruments. The results of FTIR and 1H NMR showed that PAD was indeed polymerized by AM and DMC. The results of TGA showed that PAD was very stable at room temperature while the result of SEM revealed that PAD had a porous structure and rough surface. For PAD used as flocculant in kaolin wastewater treatment, the results confirmed that, at optimal conditions, the turbidity and the floc size d50 could reach to 5.9 NTU and 565.936 μm, respectively, at the optimal conditions (pH = 7.0 and dosage = 2 mg l−1). Kaolin wastewater flocculation test outcome reveals that the PAD with high cationic degree and intrinsic viscosity could boost the charge neutralization and bridging capability. Consequently, the result is an excellent flocculation performance of treating kaolin wastewater. [ABSTRACT FROM AUTHOR]

Modified natural polymer flocculants has been the focus of research in environmental engineering field. Natural large molecular compound, chitosan (CTS) with many functional amino and hydroxyl groups can be easily modified to enhance its original functions. This work presents an environmentally friendly chitosan-based cationic polyacrylamide flocculants (CTS-g-PAMA) with enhanced function of sterilization and flocculation. CTS-g-PAMA was synthesized through Ultraviolet (UV)-initiated copolymerization. Structure characterization of FTIR, 1 H NMR, XRD and UV spectrum confirmed the successful grafting of AM and MAPTAC. Scanning electron microscopy (SEM) analysis results showed that CTS-g-PAMA exhibited a porous structure with a prodigious surface area. CTS-g-PAMA was then applied to treat a series of simulated waste water containing kaolin or Escherichia coli . Flocculation tests indicated that CTS-g-PAMA not only showed excellent flocculation effect but also showed high sterilization capability. A series of ONP concentration measurement tests through UV spectra analysis and 3D EEM analysis of suspension before and after flocculation were conducted to study sterilization mechanism, and results revealed the sterilization effect of CTS-g-PAMA was essentially bactericidal, not just antibacterial. [ABSTRACT FROM AUTHOR]

• Amphiphilic CPAM was fabricated through ultrasonic initiated template polymerization. • Comparative characterizations confirmed the microblock structure and amphiphilicity. • Template copolymerization met bimolecular termination of free radical polymerization. • The effect of NaPAA followed template polymerization I (ZIP) mechanism. • Cationic microblocks produced stronger flocs to form more permeable filter cakes. Flocculation is an important pretreatment technique for sludge dewatering, the performance of employed flocculants is the key factor determine the flocculation efficiency. Herein, an amphiphilic cationic polyacrylamide (CPAM) with microblock structure was synthesized through template copolymerization initiated by ultrasonic. The chemical components and cationic microblock structure of copolymers were confirmed through comparative characterization by Fourier Transform Infrared (FTIR) and Nuclear Magnetic Resonance (1H NMR) spectrum. The copolymerization mechanism was investigated through kinetics study and association coefficient (K M) determination. The results indicated that the reaction followed free radical copolymerization and terminated mainly through bimolecular termination. The pre-adsorption between acryloyloxyethyltrimethylammonium chloride (DAC) and sodium polyacrylate (NaPAA) before reaction confirmed the template polymerization met the type I (ZIP) mechanism. Cationic microblocks and hydrophobic association together contributed to the optimal dewaterability (FCMC=67.2 %, SRF=3.84×1012 m·kg−1) using TP(AM-DAC-LA). Hydrophobic association enhanced bridging and sweeping effect to promote the floc size growth. Cationic microblocks produced compacter flocs with stronger mechanical strength through enhanced charge neutralization and patching effects, which acted as skeletons to make filter cakes less compressible and more permeable in mechanical dewatering. This work developed a highly effective flocculant for sludge dewatering, the synthesis and working mechanism of which were also given. [ABSTRACT FROM AUTHOR]

In this study, the ultrasonic (US)-initiated template copolymerization was employed to synthesize a novel cationic polyacrylamide (CPAM) characterized by a microblock structure using dimethyldiallylammonium chloride (DMDAAC) and acrylamide (AM) as monomers, and sodium polyacrylate (NaPAA) as template. The polymers structure property was analyzed by Fourier transform infrared spectroscopy (FT-IR), 1 H nuclear magnetic resonance spectroscopy ( 1 H NMR) and thermogravimetric analysis (TGA). The results showed that a novel cationic microblock structure was successfully synthesized in the template copolymer of DMDAAC and AM (TPADM). Meanwhile, the analysis result of association constant (M K ) provided powerful support for a I Zip-up (ZIP) template polymerization mechanism and the formation of the microblock structure. The factors affecting the polymerization were investigated, including ultrasonic power, ultrasonic time, monomer concentration, initiator concentration, m AM :m DMDAAC and n NaPAA :n DMDAAC . The sludge dewatering performance of the polymers was evaluated in terms of specific resistance to filtration (SRF), filter cake moisture content (FCMC), floc size (d 50 ) and fractal dimension (D f ). Flocculation mechanism was also analyzed and discussed. The sludge dewatering results revealed that the polymer with the novel microblock structure showed a more excellent flocculation performance than those with randomly distributed cationic units. A desirable flocculation performance with a SRF of 4.5 × 10 12  m kg −1 , FCMC of 73.1%, d 50 of 439.156 µm and D f of 1.490 were obtained at pH of 7.0, dosage of 40 mg L −1 and the molecular weight of 5.0 × 10 6  Da. The cationic microblock extremely enhanced the polymer charge neutralization and bridging ability, thus obtaining the excellent sludge dewatering performance. [ABSTRACT FROM AUTHOR]

In this study, a template polymer with anionic microblock structure was successfully synthesized through ultrasonic initiated template copolymerization (USTP) by using sodium allylsulfonate (SAS) and acrylamide (AM) as monomers, poly diallyl dimethyl ammonium chloride (polyDADMAC) as template, and 2,2′-azobis [2-(2-imidazolin-2-yl) propane] dihydrochloride (VA-044) as initiator. The anionic polyacrylamide (APAM-T) flocculant was characterized by Fourier transform infrared spectroscopy (FTIR), 1H nuclear magnetic resonance spectroscopy (1H NMR), and scanning electron microscopy (SEM). Furthermore, the X-ray photoelectron spectroscopy (XPS) was conducted to measure the elemental composition. The results of XPS and 1H NMR spectroscopy analysis indicated the existence of anionic microblock structure in APAM-T. Besides, the copolymerization was revealed to follow the self-assembly mechanism by analyzing the association constant (K M). The flocculation performance was evaluated by turbidity and zeta potential in the flocculation tests. The results indicated that the APAM-T with microblock structure enhanced the charge neutralization and bridging adsorption capacity, thus improving the flocculation performance. In the floc particle size distribution and fragmentation and reflocculation experiments, the floc corresponding to APAM-T had the strongest regeneration ability after fragmentation, which further confirmed the criticality of the microblock structure in enhancing the flocculation performance. Compared with existing studies, this study not only demonstrated a novel synthesis method, but also found that the microblock structure could significantly improve its treatment efficiency and effectiveness, providing a new theoretical basis and practical application path for wastewater treatment technology. [Display omitted] • Anionic polyacrylamide with regular microblock structure was synthesized. • The reactivity and copolymerization degree were enhanced by microblock structure. • The turbidity removal of APAM-T for hematite wastewater could reach 98.22 %. • The charge neutralization and bridging adsorption capacity of APAM-T were enhanced. [ABSTRACT FROM AUTHOR]