Search

Incineration has emerged as one of the acceptable ways to treat municipal solid waste (MSW) due to its potential in reducing the mass and volume of the waste. However, it produces two major by-product residues, namely MSW-bottom ash (MSW-BA) and MSW-fly ash (MSW-FA). These residues have gained great attention to their hazardous nature and potential to be reused and recycled. In this paper, the physicochemical characterizations of the MSW-BA and the MSW-FA were performed, followed by a systematic investigation of metals extraction from MSW-BA and MSW-FA. Various extracting agents were used to investigate the possibility to extract 21 metals including cadmium (Cd), vanadium (V), chromium (Cr), and lead (Pb). It was revealed that some metals were present in a high amount in the MSW-BA while other metals were higher in the MSW-FA. Moreover, the energy-dispersive X-ray spectroscopy results revealed that the MSW-BA was dominated by oxygen (O) 55.4 ±0.6 wt%, silicon (Si) 22.5 ±0.3 wt%, and calcium (Ca) 18.5 ±0.2 wt%. On the other hand, the MSW-FA was enriched with Ca 45.2 ±0.5 wt%, and O 40.3 ±0.4 wt%. From the scanning electron microscopy, the MSW-BA was observed as flaky with an irregular surface that consisted of large pores, while, the MSW-FA was present as agglomerated particles and had a bimodal distribution. Moreover, Fourier transform infrared spectroscopy revealed that Al-Fe-OH, Al-Al-OH, Si-O, C-O, and C-H were some of the major functional groups present in the ashes. The F-tests concluded that the metal extraction from the MSW-BA and MSW-FA were significantly affected by the acid type. it is concluded that nitric acid and phosphoric acid were the best-suited acid for the MSW-BA while sulfuric acid and phosphoric acid for the MSW-FA. More than 11 wt% of Cd and 9 wt% of Cu were extracted from MSW-BA while 6 wt% of Pb and 4.5 wt% of V were extracted from the MSW-FA. The present methodology is an interesting development in metal extraction from the MSW-BA and the MSW-FA, which can develop in a cost-effective and sustainable option to utilize MSW. [ABSTRACT FROM AUTHOR]

Abstract: In Jordan, large amounts of fly ash (FA) are produced as a result of burning heavy fuel in power plants. Extraction of metals from FA is an important industrial/environmental issue to assess metals’ mobility and applications. Large amounts of metals (V, Ni, Fe, Ca, Mg, Na, and K) were easily leached from FA under acidic, basic, and neutral conditions and this makes disposal of this material an important environmental issue. Extraction and separation of vanadium (V) and nickel (Ni) from FA is achieved using Akita''s procedure with some modifications. In the first step, Ni is selectively eluted from FA using NH4OH solution and then precipitated using Na2S. The Ni/V ratio in final precipitate was 27. On the other hand, V is extracted from Ni-free-FA using Na2CO3 solution, recovered by 0.1M tri-ethylamine/toluene, and precipitated by NH4Cl. The V/Ni ratio in the final precipitate was 55. The adopted method showed a reasonable recovery for both metals from FA, 56 and 45% from Ni and V, respectively. The earlier attempts indicated that separation of V/Ni by precipitation using OH− or CO3 2− was not successful where both the metals did not precipitate from solution in the presence of other elements. [Copyright &y& Elsevier]

This paper investigated the development and evaluation of an extraction process for copper, chromium, cobalt, iron, manganese, zinc, lead, cadmium, barium, magnesium, and vanadium from municipal solid waste incineration ash (bottom and fly ashes) based on microwave-assisted acid extraction method. In this study, a novel conventional microwave-mediated technique was applied by using various acidic extracting agents, namely, hydrochloric acid, nitric acid, and phosphoric acid. Several experimental conditions and parameters were modified and optimized to determine the most effective conditions for maximizing metal extraction. The results were also compared with our preliminary research, which investigated the optimization of conventional heating for extracting the same metals. The current study concluded that the microwave-assisted acid extraction method was much more effective than conventional heating. The metals from the bottom ash were much easier to extract in contrast with the fly ash. For the bottom ash, 71 wt% of Co, 75.69 wt% of Cr, 56.19 wt% of Cd, 35.23 wt% of Ba, 30.2 wt% of Pb, and 5.41 wt% of Mn were effectively extracted using the protocol C (2 M HCl and 3 M H 3 PO 4). 13.87 wt% of Al, 10.59 wt% of Cu, 7.2 wt% of Fe, 5.25 wt% of Mg were also extracted using the protocols D and E (3 M HNO 3 and 3 M H 2 O 2) from MSW-BA. On the other hand, for the fly ash, 2.27 wt% of Cu, 0.93 wt% of Fe, 2.32 wt% of Zn, 6.28 wt% of Cd, 1.98 wt% of Ba, 3.46 wt% of Mg and 4.7 wt% of V were extracted by using the protocol A (5 M HCl and 5 M HNO 3). 1.48 wt% of Cr, 0.93 wt% of Fe, 1.19 wt% of Mn, and 1.18 wt% of Al were extracted using the protocol C (2 M HCl and 3 M H 3 PO 4). It was also confirmed that higher microwave power levels had a positive effect on the metal extraction, and longer contact times had an adverse effect. When comparing the cost analyses for both methods, it was found that the microwave-assisted acid extraction was less expensive than the conventional heating. The present study offers a promising method, which is simple and cost-effective and presents a minimal environmental risk to extract metals from municipal solid waste incineration ash. Image 1 [ABSTRACT FROM AUTHOR]

This paper investigates the development of stable geopolymers using petroleum fly ash with high compressive strength and water absorption to promote cleaner production, sustainability, and recycling of waste. The paper provided detailed characterizations of the petroleum fly ash, which involved the determination of the particle size diameter, density, surface area, pore-volume, mineralogical identification of recording X-ray diffraction pattern, X-ray fluorescence, Fourier transform infrared, thermogravimetric analysis, and scanning electron microscope. Moreover, metals leachability from the petroleum fly ash using different extracting agents, namely H 2 SO 4 , H 3 PO 4 , (NH 4) 2 SO 4 , NH 4 NO 3 , and NH 4 O 2 CCO 2 H was also considered. Five geopolymers were prepared using different amounts of petroleum fly ash to assess the influence of petroleum fly ash on the final performance of the prepared geopolymers. The results revealed that the petroleum fly ash was carbonaceous in nature and rich in vanadium oxide and nickel oxide with low in SiO 2 and Al 2 O 3. Furthermore, it was found that petroleum fly ash has a low calcium level. The maximum extraction values were 15.6% for V and 55.6% for Ni using H 2 SO 4. All the prepared geopolymers displayed high compressive strength for longer curing times, and the water absorption properties of all geopolymers were improved by incorporating more petroleum fly ash. Increasing the petroleum fly ash from 0 vol% to 61 vol% increased the water absorption value from 6.6 to 13.3 wt% for the samples collected after 28 days of curing. It was concluded that the petroleum fly ash did tend to form successful stable geopolymers with high compressive strength and water absorption. [ABSTRACT FROM AUTHOR]