Search

Accessory minerals in granitic rocks are unlikely significant radionuclide contributions to groundwater due to their remarkable durability. However, accessory minerals incorporating U and Th may suffer structural damages due to the radioactivity and become highly susceptible to alteration. This study investigates geochemistry coupled with textural analysis of the U-Th bearing accessory minerals using a field emission scanning electron microscope and an electron probe micro-analyzer. Altered zircons with numerous open structures related to the radioactive decay show higher contents of U and Th and low analytical totals. Some thorites show high contents of U and non-formula elements due to the hydrothermal alteration in the metamicted thorite. The cerianite including U occurs as micro-veinlet in fracture with trace of Fe and Mn oxides, which indicates secondary phase formation from the decomposed accessory minerals in an oxidizing environment. Some accessory minerals with the high content of U and Th have been found in Mesozoic granite terrain in South Korea, where high concentration levels of radionuclide in groundwater were also reported. The leaching of U may be more likely when the accessory minerals are highly metamicted or altered as found in our samples. The altered zircon and thorite of the study area could be major carriers of radioelement in Mesozoic granitic aquifers where the occurrence of soluble U-minerals has not been reported., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Land subsidence is the gradual or sudden dropping of the ground surface developed by increasing the total stress. Most studies have discussed the relationship between land subsidence with groundwater level. However, there is a lack of discussion on groundwater environmental changes after occurring land subsidence. This study aimed to evaluate the hydrogeological and water chemistry characteristics of construction sites with land subsidence. Land subsidence in the Yangyang coastal area occurred suddenly on August 3, 2022, when the retaining wall of the construction collapsed. The groundwater level was measured three times, and water samples were collected twice between August 5, 2022, and September 5, 2022, for laboratory analysis. After land subsidence occurred, the average groundwater level was - 19.91 m ground level (GL) on August 9, 2022, and finally decreased to - 19.21 m GL on September 05, 2022. The groundwater levels surrounding the construction site gradually increased for a month. The electrical conductivity value measured at the monitoring wells ranged from 89 to 7800 μS/cm, and four wells exceeded the measurement limit near the groundwater leaked points. The highest mixing ratio of leaked water samples, collected on August 9, 2022, was 27.6%. Furthermore, the fresh groundwater-saltwater interface depth was estimated to be above the construction bottom. Although groundwater levels recovered, the groundwater quality continuously is affected by saltwater. This finding could contribute to understanding the hydrogeological characteristics surrounding construction sites with land subsidence and provide insight into the hydrochemical evolution process during declined groundwater levels in coastal aquifers., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Microplastic (MPs) contamination in groundwater has received massive attention since plastic waste has been released directly into the environment. This study investigates MPs contamination in groundwater on the Jeju volcanic Island, Korea. To the best of our knowledge, this is the first study to identify MPs in groundwater from volcanic islands. A total of 21 sites were sampled for groundwater wells and springs in July and September (2021). Sampling was performed without cross-contamination through quality assurance and quality control. The results showed that MPs abundance ranged from 0.006 to 0.192 particles/L in groundwater samples. Additionally, MPs were detected in deep groundwater wells where the groundwater level was 143 m below ground surface. Eight MPs polymer types, including polypropylene, polyethylene, polyethylene terephthalate, polyvinyl chloride, polystyrene, polyamide, acrylonitrile butadiene styrene, and polyurethane, were detected using Micro-Fourier Transform Infrared Spectroscopy (μ-FT-IR). Most of the detected MPs size ranged from 20 to 100 μm, accounting for 95% of the total. Fragments and fiber shaped MPs were detected, with the majority of them being fragmented in groundwater samples. The concentrations of MPs and major ions in groundwater showed a positive correlation. A negative correlation was observed between MPs concentration and topographic elevation (r = -0.59, p = 0.01). The source of MPs contamination is most likely attributed to agricultural activities, such as plastic mulching and greenhouses, which account for most of the land use in the study area. In this study, MPs entered the aquifer through the soil at the surface and seeped through cracks in fractured rock on basalt with sealed groundwater wells. This study takes 500 L of samples to prevent sample bias, reveal plastic contamination in groundwater, and indicating the characteristics and sources of contaminated plastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

This paper discusses some critical weak points and mistakes identified in the original paper. The authors disregarded the importance of field blanks, sampling equipment, and well specifications for proper quality assurance and control. Beneficial field practices guarantee highly reliable results of laboratory analysis for microplastics. In addition, polymer type (chemical composition) and shape (form) are different classification criteria, but the authors mixed these in their description. The distribution and transport of microplastics should be properly understood, along with a knowledge of groundwater flow conditions, such as flow direction and velocity, in the study area., (Copyright © 2021. Published by Elsevier Ltd.)

Efforts to reduce the toxic effects of microplastics (MPs) on the environment have increased globally in recent years. However, the existing models used for the simulation of contaminant transport in groundwater are meant for dissolved substances, which is not suitable for studying MPs. Therefore, in this study, the transport of MPs in a saturated porous medium was modeled by establishing governing equations. Simulations were performed using the finite element method to examine the effects of the parameters of the governing equations on the transport of MPs. The results suggest that it is necessary to reduce the diffusivity of MPs and increase the water flow velocity, porosity, and first-order attachment coefficient to effectively contain this environmental hazard. From the simulation results, it can be derived that a combination of low diffusivity, fast water flow velocity, and high soil porosity may reduce the amount of MPs that are leaked into groundwater environments. The modeling and simulations performed in this study provide a clear understanding of the transport phenomena of MPs with applications in combating water pollution. [ABSTRACT FROM AUTHOR]

We report unique observations from drilling and hydraulic stimulation at a depth of approximately 4.3 km in two Enhanced Geothermal System (EGS) wells at the Pohang EGS site, South Korea. We surveyed drilling logs and hydraulic stimulation data, simulated pore pressure diffusion around the fault delineated by seismic and drilling log analyses, conducted acoustic image logging through the EGS wells, observed significant water level drops (740 m) in one of the two EGS wells, and obtained hydrochemical and isotopic variation data in conjunction with the microbial community characteristics of the two EGS wells. We discuss the hydraulic and hydrochemical responses of formation pore water to a few key seismic events near the hypocenter. We focused on how the geochemistry of water that flowed back from the geothermal wells changed in association with key seismic events. These were (1) a swarm of small earthquakes that occurred when a significant circulation mud loss occurred during well drilling, (2) the MW 3.2 earthquake during hydraulic stimulation, and (3) the MW 5.5 main shock two months after the end of hydraulic stimulation. This study highlights the value of real-time monitoring and water chemistry analysis, in addition to seismic monitoring during EGS operation. [ABSTRACT FROM AUTHOR]

Based on water chemistry data, a rockfill dam in South Korea was investigated to identify major parts of substantial dam water leakage. Sinkholes in the dam crest and abnormal water leakage through the dam were observed since the first impounding of the dam. Previous investigations, including observational drillings, hydraulic tests, geophysical surveys, and tracer tests, revealed the development of a high permeability zone in the clay core and an abnormally high phreatic line zone in the left embankment. Sequential tracer tests provided further evidence of locations of preference and rapid water leakage pathways. In this study, we examined the usefulness of water chemistry data to confirm previous findings of water leakage. Factor analysis of the water chemistry data revealed major processes controlling the chemical composition, which include the wash-out and successive dissolution of fill materials in the dam interior, interaction between percolating water and dam core materials, and contamination of seeping water by grouting materials and previous tracer tests. Distinct spatial distribution of similar chemical groups was illustrated by cluster analysis and confirmed the location of major water leakage at the left abutment adjoining the spillway. [ABSTRACT FROM AUTHOR]

Abstract: The Unmun Dam, a rockfill dam with a clay core, filter zone, and sandy gravel shell, is located in the Nakdong river basin near Cheongdo-gun in Korea. In the dam area, the Cretaceous Gyeongsang supergroup andesite lies over intrusive granite. These form the intrusive contact near the main dam and cofferdam areas. The stratigraphic units in upward sequence consist of Cretaceous granite and andesite, weathered soft rock, and a soil layer of silty clay with gravel. The reservoir was first filled in August 1994 and was full by April 1998. Right after complete filling, three sinkholes were found in the dam crest near stations 2, 12, and 10 when the reservoir level was at around 150 m. The amount of leakage increased with rise of the reservoir level mainly caused by rainfall events. As a countermeasure for the abnormal leakage and dam rehabilitation, comprehensive surveys were performed on the dam including observational drillings, grouting, geophysical surveys, and tracer tests by Korea Water Resources Corporation (KOWACO). There were also further investigations for hydrologic characterization of the dam to identify water leakages. The groundwater levels at the 26 observation wells installed on the crest and dam toe were measured to evaluate the relationship between the reservoir level and groundwater level, and the influences on the dam leakage. Groundwater level at the left side of the embankment was high compared with a normal phreatic line; it was only 4 m lower than the reservoir level while 6.65 m lower than that at its right side. Fluctuation of the groundwater levels in the crest wells coincided well with the reservoir level without a significant lag time, which reflected a good hydraulic connection between the reservoir and the dam interior. Hydraulic conductivity estimated from 149 hydraulic tests at 9 monitoring wells constructed in the dam core showed a wide range between 1.42×10−4 and 4.35×10−8 cm/s with a geometric mean of 3.13×10−6 cm/s. Furthermore, water quality at the monitoring wells were much different from that of the reservoir. High levels of turbidity and electrical conductivity were observed at the monitoring wells in the left side of the bank. All these hydrologic characteristics reflected possible occurrence of the leakage on the dam, especially in the left embankment. This paper presents a summary of several investigation studies on the hydrologic characteristics of the rockfill dam, which implied abnormal water leakage. [Copyright &y& Elsevier]

Groundwater samples were collected from the tubular wells of a groundwater heat pump (GWHP), and the psychrophilic, mesophilic, and thermophilic bacteria inhabiting the collected groundwater were cultured and isolated. Using the isolated bacteria, we analyzed temperature-dependent changes in autochthonous bacteria based on the operation of the GWHP. Microbial culture identified eight species of bacteria: five species of thermophilic bacteria (Anoxybacillus tepidamans, Bacillus oceanisediminis, Deinococcus geothermalis, Effusibacillus pohliae, and Vulcaniibacterium thermophilum), one species of mesophilic bacteria (Lysobacter mobilis), and two species of psychrophilic bacteria (Paenibacillus elgii and Paenibacillus lautus). The results indicated A. tepidamans as the most dominant thermophilic bacterium in the study area. Notably, the Anoxybacillus genus was previous reported as a microorganism capable of creating deposits that clog above-ground wells and filters at geothermal power plants. Additionally, we found that on-site operation of the GWHP had a greater influence on the activity of thermophilic bacteria than on psychrophilic bacteria among autochthonous bacteria. These findings suggested that study of cultures of thermophilic bacteria might contribute to understanding the bio-clogging phenomena mediated by A. tepidamans in regard to GWHP-related thermal efficiency. [ABSTRACT FROM AUTHOR]

The objective of this study is to examine groundwater responses before and after the November 15, 2017 Pohang earthquake (Mw=5.4) in a coastal area of Korea. The earthquake caused devastating damages to many buildings in the city. For this study, groundwater monitoring data (water level, electrical conductivity, water temperature) were obtained for January 2016 to February 2018 from the national groundwater monitoring stations, the rural groundwater monitoring wells, and the seawater intrusion monitoring wells and they are located within 25 km from the epicenter. There are eight national groundwater monitoring stations (PSG, PYI-D, PYI-S, PGB-D, PGB-S, PJH, PDH, PGR), five rural groundwater monitoring wells (PH1, PH2, PH3, PH4, PH5) and four seawater intrusion monitoring wells (GG1, GG2, YI1, YI2). Six of the monitored wells showed groundwater level decreases of 9–81 cm and two of them exhibited a recovery to the previous level within three days while the remaining wells did not. And six monitoring wells showed EC changes to the earthquake with -1,274–161 μS/cm. In addition, three wells showed discernible groundwater temperature fluctuations of -0.2–0.3oC. Here, we found the magnitude of groundwater level change is decreasing with distance of the monitoring wells from the epicenter. Some detailed analyses on the relationship between the responses and a variety of hydrogeological parameters deserve a further study. This work was supported by the Energy Efficiency & Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Trade, Industry and Energy (No. 20183010111860) and by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2015R1A4A1041105). [ABSTRACT FROM AUTHOR]