Search

Poly(lactide)/halloysite nanotubes (PLA/HNT) nanocomposites with crystalline matrix were obtained by cold crystallization and examined. Neat HNT and HNT treated with N,N′- ethylenebis(stearamide) (EBS) were used as nanofillers. Reference materials, PLA and PLA/EBS blend, prepared in the same way, were also considered. The influence of HNT and/or EBS content on the crystallinity and morphology of PLA matrix, as well as on the dynamic mechanical and optical properties of the materials, was determined. The nanocomposites contained well-distributed HNT, with only occasional agglomerates. HNT, EBS-treated HNT and EBS influenced the morphology of the crystalline PLA matrix and the amounts of the disorder α’ (termed also δ) and order α crystallographic forms of PLA. Crystallinity increased stiffness of the materials compared to their counterparts with the amorphous matrix. Owing to the crystallinity and the presence of the nanofillers, the storage modulus at 20 °C and 60 °C increased by up to 30 and 60%, respectively, compared to neat amorphous PLA. Interestingly, at lower nanofiller content the crystalline nanocomposites with EBS were more transparent than neat crystalline PLA. [ABSTRACT FROM AUTHOR]

Amorphous polylactide/halloysite nanotube (PLA/HNT) nanocomposites were prepared and examined. Neat HNT and HNT treated with N,N' - ethylenebis(stearamide) (EBS) were used as nanofillers. The role of HNT and/or EBS content on the cold crystallization of amorphous PLA matrix, HNT dispersion, as well as on the dynamic mechanical and optical properties of the materials was determined. The PLA/HNT-based nanocomposites contained well-distributed nanotubes and occasionally micron-sized aggregates, especially at high loading. HNT, EBS treated HNT and EBS influenced the cold crystallization of PLA, therefore the formation of the disorder α′ and the order α crystallographic forms of PLA. The nanocomposites exhibited increased stiffness and decreased transparency compared to the neat PLA. Due to the reinforcing effect and additional specific features of HNT, the addition of the nanofiller allows tuning of the properties of the nanocomposites with amorphous PLA matrix. [ABSTRACT FROM AUTHOR]

Among currently available bio-based polymers, polylactide (PLA) and its (nano)composites have interesting physical and mechanical properties (high tensile strength and stiffness, good processability, biodegradability...). However, they have relatively low thermal stability at high temperature, low toughness and are extremely brittle, all of these drawbacks being obstacles to their utilization in many engineering applications. In this study, PLA-halloysite nanotubes (HNT) nanocomposites are modified by co-addition of a plasticizer (tributyl citrate (TBC)), aiming at reaching mechanical properties suitable for automotive applications. Properties of nanocomposites at different plasticizer contents are characterized with the aim to reach the best compromise between high tensile and flexural strengths and rigidities (ascribed to the matrix and HNT) and impact resistance, ductility, crystallization rat,e and degree of crystallinity, in particular. Results show that plasticized PLA-HNT nanocomposites are very interesting bio-based alternatives for automotive applications, when the plasticizer content is carefully chosen. [ABSTRACT FROM AUTHOR]