Search

Soft actuators with large deformation and high stability in response to multi-stimuli are highly demanded in biomimetic applications. However, most of the present actuators driven by a single stimulus often exhibit low performance and high energy consumption. In this work, a sandwich structural soft actuator (MPDMS/MXene/PTFE) which possesses electrothermal/magnetic coupling actuation is fabricated by combining magnetic NdFeB/Polydimethylsiloxane (MPDMS) composite layer, MXene film, and PTFE tape together. Due to the large difference of thermal expansion coefficient between MPDMS film and PTFE tape, the soft actuator shows a wonderful electrothermal actuation and the bending deformation can reach to as high as 353° under a 3 V power supply. The excellent electrical conductivity of MXene component endows the sandwich film with good thermal management performance, thus the soft MPDMS/MXene/PTFE sandwich films can be applied in the thermal treatment of body and thermal imaging. Most importantly, the soft actuator also exhibits a typical magnetic biomimetic actuation and the programmable actuation performance of the dragonfly actuator can be demonstrated by both experiments and finite element simulations. Eventually, the electrothermal/magnetic coupling actuation is successfully applied in an intelligent crawling robot to overcome the traditional inchworm movement simulation. A dual-mode biomimetic soft actuator based on MPDMS/MXene/PTFE with excellent electrothermal and magnetic drive performance is developed. The soft actuator enables to prepare grippers for transferring objects and assemble the wings of a biomimetic dragonfly in a magnetic field. Finally, a crawling robot is developed to demonstrate the electrothermal/magnetic coupling actuation. [Display omitted] • The highlight of this work is: • The MPDMS/MXene/PTFE soft actuator presents both electrothermal and magneto-actuated deformation behaviors. • The soft actuator shows a wonderful electrothermal actuation and the bending deformation can reach to as high as 353° under a 3 V power supply. • The finite element analysis model can provide design guidance for the deformation process of bionic actuator with complex structure. • The soft actuator strategy presented in this paper is expected to be useful for the development of bionic intelligent actuators with multi-stimulus response. [ABSTRACT FROM AUTHOR]

Local surface plasmon resonance (LSPR) of noble metal nanoparticles plays a significant role in nanocatalysis via directly harvesting optical energy from resonant light. However, the photothermally-assistant catalytic application is limited due to the narrow visible/infrared absorption range and low photothermal conversion efficiency. Herein, a sandwich-structured MXene@Au/Polydopamine (PDA) nanosheet with good hydrophilicity, large specific surface area and tri-photothermal components is developed for nanocatalysis. The Au/PDA hybrid shells are covered on the MXene nanosheets via a simple one-step redox-oxidize polymerization method. As a result, the catalytic dynamic of MXene@Au/PDA nanosheets on reducing 4-nitrophenol reaches to 0.28 min−1·mg−1, which is about 2 times larger than that of the nanocatalysts without NIR light irradiation. Owing to the well protection of PDA shell, after 10 cycles of reduction of 4-nitrophenol, MXene@Au/PDA nanosheets still maintain more than 90% activity. This work in depth insights into NIR light-assistant avenue to enhance the catalytic activity of noble metal nanocatalysts and highlights an easy synthetic model for heterogeneous catalysts based on MXene nanocomposites. An MXene@Au/PDA nanosheet with sandwiched nanostructure has been rationally fabricated by a simple in situ redox-oxidizing polymerization method. Under the irradiation of near-infrared light, the catalytic dynamic of the MXene@Au/PDA nanosheet is excitingly improved by 2 times, thus shows a typical photothermal-enhanced catalytic activity. [Display omitted] [ABSTRACT FROM AUTHOR]

Local surface plasmon resonance (LSPR) of noble metal nanoparticles plays a significant role in nanocatalysis via directly harvesting optical energy from resonant light. However, the photothermally-assistant catalytic application is limited due to the narrow visible/infrared absorption range and low photothermal conversion efficiency. Herein, a sandwich-structured MXene@Au/Polydopamine (PDA) nanosheet with good hydrophilicity, large specific surface area and tri-photothermal components is developed for nanocatalysis. The Au/PDA hybrid shells are covered on the MXene nanosheets via a simple one-step redox-oxidize polymerization method. As a result, the catalytic dynamic of MXene@Au/PDA nanosheets on reducing 4-nitrophenol reaches to 0.28 min−1·mg−1, which is about 2 times larger than that of the nanocatalysts without NIR light irradiation. Owing to the well protection of PDA shell, after 10 cycles of reduction of 4-nitrophenol, MXene@Au/PDA nanosheets still maintain more than 90% activity. This work in depth insights into NIR light-assistant avenue to enhance the catalytic activity of noble metal nanocatalysts and highlights an easy synthetic model for heterogeneous catalysts based on MXene nanocomposites. An MXene@Au/PDA nanosheet with sandwiched nanostructure has been rationally fabricated by a simple in situ redox-oxidizing polymerization method. Under the irradiation of near-infrared light, the catalytic dynamic of the MXene@Au/PDA nanosheet is excitingly improved by 2 times, thus shows a typical photothermal-enhanced catalytic activity. [Display omitted] [ABSTRACT FROM AUTHOR]