Search

Nowadays, Sentinel-1 (S-1) synthetic aperture radars (SARs) operating in wave mode and the real aperture radar (RAR) called Surface Waves Investigation and Monitoring (SWIM) onboard the China-France Oceanography SATellite (CFOSAT) are the only two kinds of spaceborne radars providing directional ocean wave information globally. To quantify the absolute uncertainties in the swell wave heights of a specific wave system (Hss) observed from these two spaceborne sensors, a triple colocation error model is exploited via WaveWatch III (WW3) wave model hindcasts for the first time. After implementing spatiotemporal collocation, cross-assigning swell partitions, and rejecting suspicious data, a database of the optimal-matched Hss triplets (S-1, SWIM, and WW3) is determined over a one-year period (June 2020–June 2021). Qualitatively, traditional dual intercomparisons indicate the inconsistency between the Hss from both SAR and RAR radars in terms of systematic biases. Furthermore, the triple collocated error analysis quantitatively reveals that, at a global scale, SWIM onboard CFOSAT has the least uncertainty in Hss [~0.2-m root mean square error (RMSE) and ~11% scatter index (SI)] compared with S-1 SAR (0.35–0.50-m RMSE and 17%–26% SI depending on incidence modes) and WW3, under the assumption that the random errors of the three data sources are independent, indicating that the newly launched SWIM instrument is an invaluable resource of directional wave information for the scientific community. The results are discussed with respect to regional error characteristics along with a feasible explanation of error sources. The findings could be helpful for better understanding and synergistically exploiting the Hss datasets from these two spaceborne radars. [ABSTRACT FROM AUTHOR]

The interferometric imaging radar altimeter (InIRA) aboard the Chinese Tiangong-2 space laboratory is the first spaceborne imaging radar working at low incidence angles. This study focuses on the retrieval of significant wave heights (SWHs) from InIRA data. The retrieved SWHs can be used for correcting the sea state bias of InIRA-derived sea surface heights and can supplement SWH products from other spaceborne sensors. First, we analyzed tilt, range bunching and velocity bunching wave modulations at low incidence angles, and we found clear dependencies between the SWH and two defined factors, range and azimuth integration, for ocean waves in the range and azimuth directions, respectively. These dependencies were further confirmed using InIRA measurements and collocated WaveWatch III (WW3) data. Then, an empirical orthogonal SWH model using the range and azimuth integration factors as model inputs was proposed. The model was segmented by the incidence angle, and the model coefficients were estimated by fitting the collocation at each incidence angle bin. Finally, the SWHs were retrieved from InIRA data using the proposed model. The retrievals were validated using both WW3 and altimeter (JASON2, JASON3, SARAL, and HY2A) SWHs. The validation with WW3 data shows a root mean square error (RMSE) of 0.43 m, while the average RMSE with all traditional altimeter data is 0.48 m. This indicates that the InIRA can be used to measure SWHs. [ABSTRACT FROM AUTHOR]

Sea state estimation from wide-swath and frequent-revisit scatterometers, which are providing ocean winds in the routine, is an attractive challenge. In this study, state-of-the-art deep learning technology is successfully adopted to develop an algorithm for deriving significant wave height from Advanced Scatterometer (ASCAT) aboard MetOp-A. By collocating three years (2016–2018) of ASCAT measurements and WaveWatch III sea state hindcasts at a global scale, huge amount data points (>8 million) were employed to train the multi-hidden-layer deep learning model, which has been established to map the inputs of thirteen sea state related ASCAT observables into the wave heights. The ASCAT significant wave height estimates were validated against hindcast dataset independent on training, showing good consistency in terms of root mean square error of 0.5 m under moderate sea condition (1.0–5.0 m). Additionally, reasonable agreement is also found between ASCAT derived wave heights and buoy observations from National Data Buoy Center for the proposed algorithm. Results are further discussed with respect to sea state maturity, radar incidence angle along with the limitations of the model. Our work demonstrates the capability of scatterometers for monitoring sea state, thus would advance the use of scatterometers, which were originally designed for winds, in studies of ocean waves. [ABSTRACT FROM AUTHOR]

In this study, we performed preliminary comparative evaluation and correction of two-dimensional sea surface height (SSH) data from the Chinese Tiangong-2 Interferometric Imaging Radar Altimeter (InIRA) with the goal of advancing its retrieval. Data from the InIRA were compared with one-dimensional SSH data from the traditional altimeters Jason-2, Saral/AltiKa, and Jason-3. Because the sea state bias (SSB) of distributed InIRA data has not yet been considered, consistency was maintained by neglecting the SSB for the traditional altimeters. The results of the comparisons show that the InIRA captures the same SSH trends as those obtained by traditional altimeters. However, there is a significant deviation between InIRA and traditional altimeter SSHs; consequently, systematic and parametric biases were analyzed. The parametric bias was found to be related to the incidence angles and a significant wave height. Upon correcting the two biases, the standard deviation significantly reduced to 8.1 cm. This value is slightly higher than those of traditional altimeters, which typically have a bias of ~7.0 cm. The results indicate that the InIRA is promising in providing a wide swath of SSH measurements. Moreover, we recommend that the InIRA retrieval algorithm should consider the two biases to improve SSH accuracy. [ABSTRACT FROM AUTHOR]