Search

[Display omitted] The development and preparation of multifunctional photothermal conversion materials has far-reaching significance for the utilization of solar energy resources in response to the energy crisis. Herein, we propose a Janus membrane for interfacial solar evaporation and phase change energy storage. The membranes were fabricated via combining the PVA film with multi-shelled hollow spheres (MHS). The membranes have asymmetric wettability, that is, one side is hydrophilic and the other side is hydrophobic. The as-resulted membranes obtain outstanding light absorption without further processing. According to these two advantages, the membranes were applied to solar evaporation. The evaporation rate of the membrane is 1.41 kg*m−2h−1 and the evaporation efficiency is 92.4 % under 1sun irradiation. Moreover, the membrane prepared by impregnating 1-Hexadecanamine (HDA) into MHS possesses excellent tensile strength (2.21 MPa) and photothermal conversion ability. The light-to-thermal conversion efficiency can reach 81.9 % under 1sun irradiation. Therefore, the membranes have broad application prospects in the field of photothermal conversion. [ABSTRACT FROM AUTHOR]

[Display omitted] • A multifunctional self-floating photothermal materials (CS-CMPsHM) were synthesized. • The CS-CMPsHM are capable of adsorption antibiotics by interfacial steam generation. • The improved adsorption was due to specific π-π electron-donor–acceptor interactions. • Wastewater purification was achieved in simulated and actual water samples. • The inhibitory effect of the collected water on plant growth was significantly reduced. Solar-driven interfacial evaporation (SDIE) technology holds the promise of purification and removal of organic pollutants from water samples. In this work, an efficient SDIE composed of multifunctional self-floating photothermal materials based on candle soot-coated conjugated microporous polymer hollow spheres (CS-CMPsHM) for treatment of tetracycline (TC) wastewater is reported. By depositing candle soot nanoparticles, CS-CMPsHM achieved excellent interfacial evaporation performance by extending the light absorption. Additionally, the π-π interaction between CMP's unique conjugated network and TC molecules and the well-developed porosity facilitates the capture of target contaminants. The synthesized CS-CMPsHM evaporator demonstrated remarkable properties, i.e., excellent photothermal performance (with superior photothermal conversion efficiency up to 94 % and evaporation rate of 1.55 kg m−2h−1 under one sun irradiation), extremely low wet thermal conductivity (0.075 W m-1K−1), reusability, superior salt resistance, stability, adsorption of pollutants and renewable performance. Furthermore, CS-CMPsHM remains its excellent purification performance from real water samples (the Yellow River) measured by a three-dimensional fluorescence spectrometer. The results of biological toxicity show that the purified water recovered by the SDIE method effectively reduced the phytotoxicity of TC. With its straightforward and scalable manufacturing process, our CS-CMPsHM demonstrates promising potential as advanced photothermal materials for the treatment of various pollutants using SDIE. [ABSTRACT FROM AUTHOR]

[Display omitted] The inevitable intermittency of solar illumination during the interfacial evaporation process can cause a reduction in the evaporation performance of solar evaporators. Here, we report the fabrication of a new solar-driven interfacial evaporator using MXene nanosheets as the photothermal layer, modifying them with conjugated microporous polymer hollow microspheres, and then compounding them with the phase change material, in this case, cetyl alcohol, to form a composite evaporator (CE) that can perform all-weather solar interfacial evaporation. By combining interfacial evaporation photothermal conversion with energy storage, the evaporator achieves an evaporation rate of 1.57 kg⋅m−2⋅h−1 at a light intensity of 1 kW⋅m−2 and 2.79 kg⋅m−2⋅h−1 at a light intensity of 2 kW⋅m−2. In addition, the evaporator attains an excellent solar evaporation efficiency of over 91% in both cases and even in salt water. In addition, interestingly, our CE exhibits excellent continuous evaporation ability, e.g., the mass of evaporated water was increased by 0.36 kg⋅m−2 at a light intensity of 2 kW⋅m−2 compared to the cavity evaporator without the phase change material (PCM) when solar light was turned off. These results could be attributed to the fact that the energy released by the incorporated phase change material allows the evaporator to maintain stable evaporation under conditions of insufficient or intermittent solar irradiation, potentially providing a new opportunity for addressing the intermittent problem of evaporation at the solar interface due to unstable light intensity, thus showing great potential for practical continuous desalination. [ABSTRACT FROM AUTHOR]

The development of efficient solar photothermal conversion and energy storage composite (SPCSC) is of great significance in solving the imbalance between supply and demand of solar energy utilization in time and space. Herein, we prepare multi-shell hollow spheres by selecting glucose as the template and magnesium carbonate trihydrate (MgCO 3 ·3H 2 O) and chloroplatinic acid hexahydrate (H 2 PtCl 6 ·6H 2 O) as raw materials by hydrothermal-calcination method. Octadecylamine (ODA) is loaded into MSHS by vacuum impregnation to prepare SPCSC with excellent comprehensive properties (MSHS@ODA). The multi-layer hollow microspheres provide the micro-nano space structure for ODA, enhance the heat transfer rate of MSHS@ODA, effectively solve the leakage problem, and enable MSHS@ODA to have a fast photothermal response. MSHS@ODA possesses a high light absorption (75.5%), thermal conductivity (0.35 W·m−1·K−1), and photothermal conversion. The phase change enthalpy can reach 130.7 J·g−1 and maintain a high energy storage density during 100 cyclic phase change tests. Specifically, MSHS@ODA decreases the operating temperature of lithium-ion batteries by 8 °C during discharge, ensuring their stable operation within the optimal temperature range. Based on the above merits, MSHS@ODA may find useful applications in solar thermal storage and effectively managing the thermal conditions of lithium-ion batteries. [Display omitted] • The unique multi-layer hollow cavity structure of MSHS effectively encapsulates PCMs. • The multi-layer structure of MSHS enhances the heat transfer process. • MSHS@ODA has high latent enthalpy, thermal conductivity and good photothermal conversion efficiency. • MSHS@ODA is superhydrophobic and self-cleaning. • MSHS@ODA has better application prospects in battery thermal management. [ABSTRACT FROM AUTHOR]

[Display omitted] • LiCl@CCP-PPy is simple and inexpensive to prepare, with fast water absorption–desorption capacity and cyclic stability. • LiCl@CCP-PPy is a hydrophilic macroporous material with a water absorption capacity of up to 2.86 g/g at 35 % RH and 25 °C. • LiCl@CCP-PPy has good storage capacity and ensures that the salt does not leak. • The water collection rate of LiCl@CCP-PPy in a single hygroscopic-desorption cycle in the Tengger Desert was 0.64 L/m2/d. Solar-driven atmospheric water harvesting (SAWH) has been recognized as a promising strategy to alleviate the freshwater crisis. Herein, we developed an efficient porous polymeric foam, LiCl@CCP-PPy, which has low preparation cost, strong adaptability and portability, and is very suitable for use as a wicking material in SAWH systems. LiCl@CCP-PPy contains abundant –NH 2 and –OH groups. These hydrophilic groups and excellent pore structure (porosity is 80.22 %) make it have a good moisture absorption effect even in low humidity environment. The moisture absorption capacity can reach 2.86 g/g at 35 % RH and 25 °C, and 4.48 g/g at 25 °C and 90 % RH. The saturated water absorption effect was 27.48 g/g. LiCl@CCP-PPy can be scaled up for production. In addition, LiCl@CCP-PPy has a high light absorption rate of more than 90 %, and the strong photothermal conversion ability of Polypyrene (PPy) enables the material to warm up rapidly under natural light, thereby accelerating the desorption process (96 % desorption rate at 1 kW/m2 for 3 h). Based on the above properties, LiCl@CCP-PPy was applied to the Tengger desert in northwest China. The final water production efficiency was 0.64 L/m2/d, and the collected water quality met the international drinking water standard. [ABSTRACT FROM AUTHOR]

Developing high-efficiency solar photothermal conversion and storage (SPCS) technology is significant in solving the imbalance between the supply and demand of solar energy utilization in time and space. Aiming at the current research status in the field of SPCS, this review thoroughly examines the phase change materials and substrates in SPCS systems. It elucidates the design principles and methods of SPCS integrated composites. Comparatively, it analyzes the parameters of various types of SPCS composites in terms of photothermal conversion, thermal conductivity, energy density, and cycling stability. Additionally, the review discusses the trade-offs between each parameter to achieve the most optimal effect of SPCS. By sorting out the current status of the application of SPCS technology in solar thermal/photovoltaic, aerospace, buildings, textile, and other industries, this analysis clarifies the requirements for various latent heat, phase change temperature, and other properties under different environmental conditions. Through a comprehensive discussion of SPCS technology, this paper accurately captures the development trend of efficiently and comprehensively utilizing solar energy by analyzing existing scientific problems. It identifies bottlenecks in SPCS technology and suggests future development directions that need focused attention. The insights gained from this analysis may provide a theoretical basis for designing strategies, enhancing performance, and promoting the application of SPCS. [Display omitted] • SPCS technology show high efficiency for energy utilization and management. • SPCS can solve the imbalance in the supply and demand of solar energy utilization. • The study of the design principles and methods of SPCS is important. • SPCS system can solve the energy crisis and environmental pollution. • SPCS systems have great potential for practical water treatment in the future. [ABSTRACT FROM AUTHOR]