Search

BACKGROUND: Sneezes produce many pathogen-containing micro-droplets with high velocities of 4.5-50.0 m/s. Face masks are believed to protect people from infection by blocking those droplets. However, current filtration efficiency tests can't evaluate masks under sneeze-like pressure. The goal of this study was to establish a method to evaluate the filtration efficiency of mask materials under extreme conditions. MATERIALS AND METHODS: Efficiency of surgical masks, gauze masks, gauze, cotton, silk, linen and tissue paper on blocking micro-droplet sized starch particles (average 8.2 µm) and latex microspheres (0.75 µm) with a velocity of 44.4 m/s created by centrifugation was qualitatively analyzed by using imaging-based analysis. RESULTS: The 4 layers of silk could block 93.8% of microspheres and 88.9% of starch particles, followed by the gauze mask (78.5% of microspheres and 90.4% of starch particles) and the 2 layers of cotton (74.6% of microspheres and 87.5-89.0% of particles). Other materials also blocked 53.2-66.5% of microspheres and 76.4%-87.9% of particles except the 8 layers of gauze which only blocked 36.7% of particles. The filtration efficiency was improved by the increased layers of materials. CONCLUSION: Centrifugation-based filtration efficiency test not only compensates shortcomings of current tests for masks, but also offers a simple way to explore new mask materials during pandemics. Common mask materials can potentially provide protection against respiratory droplet transmission.

We present an innovative, simple, and versatile hydrophobic valve enabling all-important complex liquid manipulations on self-powered, channel-based microfluidic devices and as such being extremely valuable for the design of highly demanding point-of-care (POC) platforms. The presented hydrophobic valve is made of filter paper treated with a fluorinated compound (i.e., Aquapel) and shows both superhydrophobic properties (contact angle up to 155°) and high resistance to liquid pressure (up to 9 kPa), while retaining gas permeability and utter fabrication simplicity. Whereas this valve can be integrated in any channel-based system and can be used both as a vent, to delay liquid displacement on chip, or as a barrier, to stop the liquid flow in a certain direction, in this work we demonstrate some of its capacities by combining it with our in house developed self-powered SIMPLE and iSIMPLE platforms. First, we integrated it with the infusion iSIMPLE pump, thus generating completely fail-proof activation regardless of how the operator is actuating the system. Second, we used hydrophobic valves as both barrier and vent in the same microfluidic chip, which allowed the combination of two SIMPLE pumps for splitting one sample in two parallel channels. This attribute is fundamental for achieving multiplex analysis on completely autonomous microfluidic platforms. Finally, we achieved an unprecedented liquid manipulation for a self-powered microfluidic platform, namely, shuttling of liquid, after a single user activation by combining for the first time SIMPLE and iSIMPLE with the developed hydrophobic vent and barrier, all in a single chip. These results convincingly demonstrated that the developed hydrophobic valve combined with SIMPLE/iSIMPLE presents an essential building block for an ideal POC system, which is self-powered, inexpensive, and robust and can perform complex bioassays upon a single user activation. ispartof: ACS SENSORS vol:4 issue:3 pages:694-703 ispartof: location:United States status: published

A novel paper electrode-based flexible pressure sensor modified with multiwalled carbon nanotubes was designed for point-of-care (POC) immunoassay of carcinoembryonic antigen (CEA) with digital multimeter readout. The portable POC testing device consisted of flexible pressure sensor equipped with a paper electrode and connected through syringe tubing to a single-break microplate. The immunoreaction was initially carried out on the microplate with a sandwich-type assay format using platinum nanozyme-labeled secondary antibody for the gas generation. Upon addition of hydrogen peroxide (H2O2), platinum nanozyme (catalase-like mimic) reduced it into hydrogen oxide and oxygen (O2). The overflowing oxygen gas increased the pressure of the multiwalled carbon nanotube-functionalized paper electrode in a homemade pressure-tight system, and the increased pressure could be readily monitored using the paper electrode-based flexible pressure-tight sensor with a digital multimeter readout. The detectable signal mainly ...

This paper investigates online moisture measurement of biofuel employing a strip line cavity resonator at approximately 366 MHz, attached above and below the conveyor belt. An existing sensor design is modified for the factory assembly, and the correct operation has been tested prior to this paper with a small number of measurement points and collected reference samples (n = 67). The purpose is now to concentrate on the accuracy of the measurement and increase the number of measurement points (n = 367). The measurements were made in 5 different lots, and the thickness and moisture properties of the biomaterial mat were varied between minimum and maximum levels by adjusting the settings of the belt filter press that presses pulp slush into a mat. In order to further reduce inaccuracy, at the maximum one standard deviation was allowed from the average height of the equivalent water layer for each dataset, and consequently the number of samples was reduced to 235. A linear fit and a parabola fit were determined for thickness of the equivalent water layer vs. the relative resonant frequency shift: R2 = 0.82 and R2 = 0.78.

Mixed sludge from a pulp and paper mill was hydrothermally carbonized at 180–260 °C for 0.5–5 h with the use of HCl or NaOH for determining the effect of acid and base additions during sludge carbonization. Based on the results carbonization was mainly governed by dehydration, depolymerization and decarboxylation of sludge components. Additive type had a statistically significant effect on hydrochar carbon content and carbon and energy yield, of which especially energy yield increased through the use of HCl. The theoretical energy efficiencies of carbonization increased with decreasing reaction temperature, retention time and the use of HCl and suggested that the energy requirement could be covered by the energy content of attained hydrochar. The BOD5/COD-ratios of analyzed liquid samples indicated that the dissolved organic components could be treated by conventional biological methods.

This paper is devoted to study a structure of SiC-based materials using ultrasonic tomography method. The SiC-based materials were fabricated from preceramic paper using spark plasma sintering (SPS) method. Also as part of the study the Young's modulus and density of sintered materials were determined and the effect of sintering pressure changing to this parameters value was investigated. The preceramic paper is a composite material including a matrix of organic cellulose fibers and inorganic powder filler (SiC). The sintering temperature and pressure were 2373 K and 20-40 MPa, respectively. The holding time for the sintering process was 10 min. The density of sintered materials was investigated by the hydrostatic weighing method. Ultrasonic tomography was implemented using of single-channel sensor at 10 MHz frequency. © Published under licence by IOP Publishing Ltd. Russian Science Foundation, RSF: 19-19-00192 The research was supported by the Russian Science Foundation (grant No. 19-19-00192) as well as by

In this work, we present a new iSIMPLE concept (infusion Self-powered Imbibing Microfluidic Pump by Liquid Encapsulation), which requires no external power for activation nor liquid manipulation, it is easy to use while its fabrication method is extremely simple, inexpensive and suited for mass replication. The pump consists of a working liquid, which is - after finger activation - absorbed in a porous material (e.g. filter paper). The air expelled from the porous material increases the pressure in the downstream outlet channel and propels the outlet liquid (i.e. the sample) through the channel or ejects it. Here we investigated the influence of different filter papers on the iSIMPLE flow rates, achieving a wide range from 30 down to 0.07 μL/min. We also demonstrated the versatility of the iSIMPLE in terms of the liquid volume that can be manipulated (from 0.5 μL up to 150 μL) and the working pressure reaching 64 kPa, unprecedented high for a self-powered microfluidics pump. In addition, using a 34 G microneedle mounted on the iSIMPLE, we successfully injected liquids with different viscosities (from 0.93 up to 55.88 cP) both into an agarose matrix and a skin-like biological ex vivo substrate (i.e. chicken breast tissue). This work validated the compatibility of the iSIMPLE with drug delivery in a controlled way into a skin-like matrix, envisioning a whole new scenario for intradermal injections using self-contained skin patch. In addition, due to the extreme flexibility of the design and manufacturing, the iSIMPLE concept offers enormous opportunities for completely autonomous, portable and cost effective LOC devices. ispartof: BIOMEDICAL MICRODEVICES vol:20 issue:2 ispartof: location:United States status: Published online

In forensics, bloodstains on dark fabrics might be invisible for the naked eye. Although several visualization, presumptive, and confirmatory blood tests have been developed, all have one or more disadvantages, especially on DNA analysis. We report here the use of a visualization assay that can visually detect blood drops up to 1/20 dilution. In this assay, the fabric is placed between two wet filter papers and covered by glass surfaces on both sides. Pressure is applied on the glass surfaces in which bloodstains transfer onto the filter papers through capillary forces. Detected stains can be tested with other more sensitive presumptive blood tests performed on the filter paper. Even more, DNA analysis can be performed on the transferred bloodstains. The presented visualization assay is easy to perform, extremely cheap, requires little hands on time, and does not affect bloodstain pattern analysis.

Wood shortages, environmental pollution and high energy consumption remain major obstacles hindering the development of today’s pulp and paper industry. Energy-saving and environmental friendly pulping processes are still needed, especially for non-woody materials. In this study, soda-oxygen pulping of bagasse was investigated and a successful soda-oxygen pulping process for bagasse at 100 °C was established. The pulping parameters of choice were under active alkali charge of 23%, maximum cooking temperature 100 °C, time hold at maximum temperature 180 min, initial pressure of oxygen 0.6 MPa, MgSO4 charge 0.5%, and de-pithed bagasse consistency 12%. Properties of the resultant pulp were screened yield 60.9%, Kappa number 14, viscosity 766 dm3/kg, and brightness 63.7% ISO. Similar pulps were also obtained at 110 °C or 105 °C with a cooking time of 90 min. Compared with pulps obtained at higher temperatures (115–125 °C), this pulp had higher screened yield, brightness, and acceptable viscosity, while the delignification degree was moderate. These results indicated that soda-oxygen pulping at 100 °C, the lowest cooking temperature reported so far for soda-oxygen pulping, is a suitable process for making chemical pulp from bagasse. Pulping at lower temperature and using oxygen make it an environmental friendly and energy-saving pulping process.

A sensitive and fast-responding membrane-free amperometric gas sensor is described, consisting of a small filter paper foil soaked with a room temperature ionic liquid (RTIL), upon which three electrodes are screen printed with carbon ink, using a suitable mask. It takes advantage of the high electrical conductivity and negligible vapour pressure of RTILs as well as their easy immobilization into a porous and inexpensive supporting material such as paper. Moreover, thanks to a careful control of the preparation procedure, a very close contact between the RTIL and electrode material can be achieved so as to allow gaseous analytes to undergo charge transfer just as soon as they reach the three-phase sites where the electrode material, paper supported RTIL and gas phase meet. Thus, the adverse effect on recorded currents of slow steps such as analyte diffusion and dissolution in a solvent is avoided. To evaluate the performance of this device, it was used as a wall-jet amperometric detector for flow injection analysis of 1-butanethiol vapours, adopted as the model gaseous analyte, present in headspace samples in equilibrium with aqueous solutions at controlled concentrations. With this purpose, the RTIL soaked paper electrochemical detector (RTIL-PED) was assembled by using 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide as the wicking RTIL and printing the working electrode with carbon ink doped with cobalt(ii) phthalocyanine, to profit from its ability to electrocatalyze thiol oxidation. The results obtained were quite satisfactory (detection limit: 0.5 ?M; dynamic range: 2-200 ?M, both referring to solution concentrations; correlation coefficient: 0.998; repeatability: ±7% RSD; long-term stability: 9%), thus suggesting the possible use of this device for manifold applications. © 2012 The Royal Society of Chemistry.

This paper proposes a new disposable soft 3D force sensor that can be used to calculate either force or displacement and vibrations. It uses three Hall Effect sensors orthogonally placed around a cylindrical beam made of silicon rubber. A niobium permanent magnet is inside the silicon. When a force is applied to the end of the cylinder, it is compressed and bent to the opposite side of the force displacing the magnet. This displacement causes change in the magnetic flux around the ratiomatric linear sensors (Hall Effect sensors). By analysing these changes, we calculate the force or displacement in three directions using a lookup table. This sensor can be used in minimal invasive surgery and haptic feedback applications. The cheap construction, bio-compatibility and ease of miniaturization are few advantages of this sensor. The sensor design, and its characterization are presented in this work.

Objective: To evaluate the effects of a brain tissue oxygen (P ti o 2 ) guided treatment in patients with traumatic brain injury. Methods: P ti o 2 was monitored in 93 patients with severe traumatic brain injury. Forty patients admitted from 1993 to 1996 were treated with intracranial pressure/cerebral perfusion pressure (ICP/CPP) management alone (ICP 70 mm Hg). Fifty three patients admitted from 1997 to 2000 were treated using ICP/CPP management, but in this second group CPP was also increased as individually required to raise the P ti o 2 above 1.33 kPa (10 mm Hg) (P ti o 2 guided group). Results: Cerebral hypoxic phases with P ti o 2 values below 1.33 kPa occurred significantly less often in the P ti o 2 guided group. P ti o 2 values were higher over the whole monitoring period. No statistical differences could be observed in outcome at six months, despite a positive trend in the P ti o 2 guided group. Conclusions: Cerebral hypoxic events can be reduced significantly by increasing cerebral perfusion pressure as required. To show a clear beneficial effect of P ti o 2 guided cerebral perfusion pressure management on outcome, a multicentre randomised trial needs to be undertaken.

This paper describes the fabrication of pressure-driven, open-channel microfluidic systems with lateral dimensions of 45-300 microns carved in omniphobic paper using a craft-cutting tool. Vapor phase silanization with a fluorinated alkyltrichlorosilane renders paper omniphobic, but preserves its high gas permeability and mechanical properties. When sealed with tape, the carved channels form conduits capable of guiding liquid transport in the low-Reynolds number regime (i.e. laminar flow). These devices are compatible with complex fluids such as droplets of water in oil. The combination of omniphobic paper and a craft cutter enables the development of new types of valves and switches, such as "fold valves" and "porous switches," which provide new methods to control fluid flow.

Cellulosic wastes, from sources such as low-quality cardboard and paper, are regarded as potential feedstocks for bioethanol production. One pathway from these cellulosic materials to ethanol is saccharification (hydrolysis) followed by fermentation. Saccharification is commonly performed using enzymes that are able to cleave the cellulosic structure to smaller units, preferably to glucose monomers. During the hydrolysis, mixing conditions have a considerable impact on the performance of the enzymes. Thus mixing conditions in the hydrolysis tank can also influence the downstream operations and, consequently, the overall economy of the bioethanol process. In this experimental study, four types of impeller, at different hydrolysis conditions were used. The effect of mixing on the glucose yield and on the filtration characteristics of the hydrolysate was evaluated. It was shown that not only the sugar yield depended on the mixing conditions: the effect on the solid–liquid separation step was even more significant. Post-print / Final draft

The removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) from solid matrices has received considerable attention because of the environmental persistence, bioaccumulation, and potential toxicity of these compounds. This study presents a simple method using concentrated HNO(3) as a suppression agent, and methanol-modified supercritical carbon dioxide (Sc-CO(2)) extraction for removing PFOS and PFOA from solid matrices. The optimal conditions were 16 M HNO(3) and 20% (v/v) methanol containing Sc-CO(2), under a pressure of 20.3 MPa and a temperature of 50 °C. Extraction time was set at 70 min (40 min for static and 30 min for dynamic extraction). PFOA and PFOS were identified and quantitated by liquid chromatography/mass spectrometry. The extraction efficiencies (with double extractions) were close to 100% for PFOA and 80% for PFOS for both paper and fabric matrices. The extraction efficiencies for sand were approximately 77% for PFOA and 59% for PFOS. The results show that this method is accurate, and effective, and that it provides a promising and convenient approach to remediate the environment of hazardous PFOA and PFOS contamination.

The mechanism underlying the mineralization of bone is well studied and yet it remains controversial. Inherent difficulties of imaging mineralized tissues and the aqueous solubility of calcium and phosphate, the 2 ions which combine to form bone mineral crystals, limit current analyses of labile diffusible, amorphous, and crystalline intermediates by electron microscopy. To improve the retention of calcium and phosphorus, we developed a pseudo nonaqueous processing approach and used it to characterize biomineralization foci, extracellular sites of hydroxyapatite deposition in osteoblastic cell cultures. Since mineralization of UMR106-01 osteoblasts is temporally synchronized and begins 78 h after plating, we used these cultures to evaluate the effectiveness of our method when applied to cells just prior to the formation of the first mineral crystals. Our approach combines for the first time 3 well-established methods with a fourth one, i.e. dry ultrathin sectioning. Dry ultrathin sectioning with an oscillating diamond knife was used to produce electron spectroscopic images of mineralized biomineralization foci which were high-pressure frozen and freeze substituted. For comparison, cultures were also treated with conventional processing and wet sectioning. The results show that only the use of pseudo nonaqueous processing was able to detect extracellular sites of early calcium and phosphorus enrichment at 76 h, several hours prior to detection of mineral crystals within biomineralization foci.

Minimally invasive bariatric procedures next to becoming more and more popular have established a new field of applications for carbon dioxide (CO(2)) insufflators. In laparoscopic bariatric procedures, gas isused toinsufflate the peritoneal cavity and increase the intra-abdominal pressure up to 15 mm Hg for optima lexposure and a suitable operating field. The increased intra-abdominal pressure during pneumoperitoneum can reduce femoral venous flow, intra-operative urine output, portal venous flow, respiratory compliance, and cardiac output. However, clinical complications related to these effects are rare. Yet, surgeons should be constantly aware that the duration of an operation is an important factor in reducing the patient's exposure to CO(2) pneumoperitoneum and its adverse effects. The optimized performance of the bariatric high flow insufflator allows reaching stable abdominal pressure conditions quicker and at a higher level than a common insufflator. Therefore, high flow insufflators offer great advantages in maintaining intra-abdominal pressure and temperature in comparison to conventional insufflators and thus enhance laparoscopic bariatric surgery by potentially reducing the operating time and the undesirable effects of CO(2) pneumoperitoneum.

Background: Arachnoid cysts (AC) can cause a wide spectrum of clinical symptoms. Only a limited number of studies have investigated intracranial pressure in patients with AC. We wished to investigate the relationship between intracystic pressure, preoperative complaints and postoperative symptom relief in adult patients operated on for a unilateral temporal AC. Material and methods: This was a prospective, population based study involving 38 adult (>18 years) patients (mean age 43 years; range 18–69) with a previously untreated unilateral temporal AC. Results: For all cyst types, mean pressure was 131 mm H 2 O. The main preoperative complaints were headache and dizziness/nausea. By median split, patients were divided into a low pressure ( 2 O) and a high pressure (>130 mm H 2 O) group. Patients with high intracystic pressure had a significantly higher preoperative visual analogue scale (VAS) score (54.7) than that found in patients with low intracystic pressure (39.4). Both pressure groups had a significant fall in VAS score after surgical decompression of the cyst. Intracystic pressure correlated significantly with arterial pCO 2 and mean arterial pressure. Conclusion: There was a significant correlation between intracystic pressure and the preoperative level of complaints. Mean intracystic pressure in adult patients with unilateral temporal AC seems to lie within the limits of normal intracranial pressure. We therefore hypothesise that factors other than absolute pressure, such as altered compliance and impedance of the brain, may be involved in the pathophysiology of intracranial AC.

SUMMARY A theoretical and experimental analysis of facilitated transport of CO2 across membranes containing NaHCO3 and the enzyme carbonic anhydrase (carbonate hydro-lyase EC 4.2.1.1) is presented. The necessary diffusion reaction equations are derived and the system constraints defined. For the CO2-HCO3- system, mathematical simplifications based on the magnitude of various reaction and concentration terms are made to make the equations tractable to solution. The resultant equations are solved by a number of analytical and numerical techniques, each having a limited, though useful, range of validity. The experimental arrangement consists of a liquid membrane (created by soaking a porous filter paper in the test solution), a diffusion chamber, and gas metering and analysis equipment. Conditions were selected to cover the range from diffusionto reaction-dominated behavior. The flux of CO2 across a membrane containing ! M NaHCO3 was measured at various partial pressures of CO2 (2-28 in Hg) and with membrane thicknesses of 0.02, 0.06 and 0.10 cm. The extent of facilitation (defined as the ratio of reactionrelated flux to the expected Fick's Law flux in the absence of reaction) ranged from near zero to nearly 5 in these experiments. The agreement between model calculations and experimental observation was found to be excellent over the entire range of neardiffusion to near-equilibrium behavior. In the presence of enzyme carbonic anhydrase (0.10 mg/ml, activity approx. 80%) and 1 M NaHCO3, the CO2 flux across a 0.02 cm membrane was 3-10-fold higher than the corresponding flux in the absence of enzyme. From experiments at various enzyme concentrations and membrane thicknesses, it appeared that the apparent CO2 reaction rate was directly proportional to the enzyme concentration. The model calculations for the enzyme-catalyzed reactions agreed with the experimental observations to within ± 10 %.