Search

Wheel–rail contact creates high stresses in both rails and wheels, which can lead to different damage, such as plastic deformation, wear and rolling contact fatigue (RCF). It is important to use high-quality steels that are resistant to these damages. Mechanical properties and failure of steels are determined by various microstructural features, such as grain size, phase fraction, as well as spatial distribution and morphology of these phases in the microstructure. To quantify the mechanical behavior of bainitic rail steels, uniaxial tensile experiments and hardness measurements were performed. In order to characterize the influence of microstructure on the mechanical behavior, various microscopy techniques, such as light optical microscopy (LOM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD), were used. Three bainitic grades industrially known as B360, B1400 plus and Cr-Bainitic together with commonly used R350HT pearlitic grade were studied. Influence of isothermal bainitic heat treatment on the microstructure and mechanical properties of the bainitic grades was investigated and compared with B360, B1400 plus, Cr-Bainitic and R350HT in as-received (AR) condition from the industry. The results show that the carbide-free bainitic steel (B360) after an isothermal heat treatment offers the best mechanical performance among these steels due to a very fine, carbide-free bainitic microstructure consisting of bainitic ferrite and retained austenite laths. [ABSTRACT FROM AUTHOR]

• We compared the failure of railway thermite welds through real field-testing. • We simulated the dynamic impact force induced by the weld geometry. • We reported the progression of the surface hardness of welds in track condition. • We discussed the noticed failures; wear and cracks. This paper details the field-testing approach and results of thermite welds used in railway applications. Rail steels made from R260 grades are welded by two different processes: the standard process according to the European standards, and a recent technology. Welds are introduced in the same testing location to ensure comparable loading conditions in the aim of studying their degradation behaviours. The total testing-period is 6 months. During the in-service period, the surface hardness of the running band, in the welded area, is recurrently measured. For an accurate assessment of field results, a vehicle/track interaction (VTI) model evaluated the expected dynamic loads induced by the initial vertical irregularities. The simulations show that the highest dynamic load at the wheel/rail contact happens at the location of the maximum absolute gradient, in accordance with previous research. Particularly, dipped welds show relatively high dynamic forces inducing a high loss of the transversal profile. In respect of the field results, the comparison of initial and final surface hardness indicates a significant increase for 'ALFONS' welds over the welded areas. Additionally, all welds depicted a cyclic increase and decrease of the running band hardness. This result is discussed according to the ratcheting susceptibility of welds and eventual wear progression. For a testing-period of 10 weeks, the gauge corner of one 'ALFONS' weld developed a crack. The assessment of the longitudinal profiles revealed changes of the vertical irregularities that may modify the dynamic loads, and further the rolling contact fatigue mechanisms and degradation rates. [ABSTRACT FROM AUTHOR]