Search

The marine shale within the Sichuan Basin constitutes China's significant shale gas production, featuring old formation age, high degree of thermal evolution, multiple tectonic movements, and complex structural conditions. However, there are significant differences in the shale gas preservation conditions and reservoir quality in different areas, limiting future large-scale exploration and development. Pore structure significantly influences shale reservoir quality, gas content, and exploration of shale gas occurrence, migration, and enrichment mechanisms. The influence of structural-dominated preservation conditions on shale pore structures is essential to comprehend for effective shale gas exploitation. This study employs field-emission scanning electron microscopy in conjunction with other techniques (low-temperature N2 adsorption, low-temperature CO2 adsorption, and nuclear magnetic resonance) for detailed analyses of the pore structure across varied structural zones, revealing the influence of structural attributes, fault systems, depth of burial, and formation pressure on pore architecture, and examining the relationship between pore structure and shale gas preservation conditions. The results show that stable structural condition is conducive to the development and preservation of shale pores. Structural compression causes inorganic and organic pores to become narrow and elongated due to shrinkage, with a significant increase in microfractures. The porosity of shale with stable structural conditions exhibits markedly increased porosity compared to samples under structural compressions. Under conditions of similar TOC and mineral composition, the pore size distribution (PSD), pore volume (PV), and specific surface area (SSA) of shale after structural compression are significantly lower than those of samples with stable structural conditions. As the burial depth increases, the shale porosity shows a decreasing trend, but the decrease is limited. Burial depth significantly impacts the SSA and PV of high-TOC samples (3%-6%). As the burial depth increases, both SSA and PV show a significant decreasing trend. When the burial depth reaches 4000 m, SSA and PV tend to concentrate. The formation pressure coefficient is an important factor for the development and preservation of shale pores, and porosity is positively correlated with the formation pressure coefficient. Increased formation pressure coefficient indicates superior preservation conditions and enhanced pore development. [ABSTRACT FROM AUTHOR]

Fluid charging and formation pressure evolution are of great significance for shale gas exploration and development. Taking the Longmaxi formation shale in southeast Chongqing as the research object, the fluid activity and pressure evolution process were studied by means of thin section observation, fluid inclusion analysis and testing, and basin numerical simulation. The results show that the area of the southeast of Chongqing, the Longmaxi formation of dike filling minerals, is mainly quartz vein and calcite part of the veins and arteries, and vein body captures the rich organic inclusions in minerals, sees fgas-liquid two-phase brine inclusions and methane inclusions, combining with the temperature and salinity of brine inclusions, and shows that the area has experienced two phases of oil and gas filling, the first period of gas-liquid fluid. The second stage is gas fluid. Combined with burial history and thermal maturation history, it is found that the filling time of oil and gas is late Cretaceous and Paleocene, respectively. In the Cretaceous, the pressure coefficient of Longmaxi formation reached the maximum value of 2.2 and remained above 1.5 overpressure after pressure unloading in the later period. In terms of the frequency of inclusions, the charging amount of the first stage is relatively large, and the charging time corresponds to the peak period of the palaeo-formation pressure. At the same time, fluid charging can timely supplement the pressure after unloading, which is conducive to high and stable production of shale gas. [ABSTRACT FROM AUTHOR]

There are various sedimentary structures developed in the black shales of the Upper Ordovician Wufeng Formation and the Lower Silurian Longmaxi Formation in Luzhou area, southern Sichuan Basin, southwestern China. In order to evaluate the controlling effects of sedimentary structures on the key parameters of shale reservoir properties, collected classification of sedimentary structures, scanning electron microscope observation, analysis of shale fabric and porosity characteristics, low‐pressure nitrogen adsorption, methane isothermal adsorption, and conventional triaxial compression test were carried out based on shale samples from Wells A‐H1, B‐H1, C‐H1 and D‐H1 in the study area. The sedimentary structures recorded in these shales are categorized into five types: homogeneous bedding, weak horizontal bedding, strong horizontal bedding, discontinuous ripple bedding, and gravel‐bearing massive bedding. In general, the palaeo‐hydrodynamics and oxygen content of water columns were weak when homogeneous bedding shale was deposited. The organic matter is the most abundant and the total organic carbon content is up to 4.01% on average. The average quartz content is 43.5%, and the brittleness index is the highest. The porosity and adsorption capacity were the highest, with an average of 4.57% and 79.5 scf/ton, respectively. Combined with its mechanical properties of low Poisson's ratio and high Young's modulus, homogeneous bedding sedimentary structure is associated with the shale units possessing the highest organic matter abundance, the strongest reservoir property, and the best fracability, which is the priority target for exploration and development of the Wufeng to lower Longmaxi Formation in the Sichuan Basin, southwestern China. [ABSTRACT FROM AUTHOR]

The shale of the Lower Silurian Longmaxi Formation is an important gas-producing layer for shale gas development in southern China. This set of shale reservoir characteristics and shale gas development potential provide an important foundation for shale gas development. This study takes wellblock XN111 in the Sichuan Basin, China, as an example and uses X-ray diffraction (XRD), scanning electron microscopy (SEM), isothermal adsorption, and other techniques to analyze the shale reservoir characteristics of the Lower Silurian Longmaxi Formation. The results show that the Lower Silurian Longmaxi Formation was deposited in a deep-water shelf environment. During this period, carbonaceous shale and siliceous shale characterized by a high brittle mineral content (quartz > 40 wt. % , carbonate mineral > 10 wt. %) and a low clay mineral content (<30 wt.%, mainly illite) were widely deposited throughout the region. The total organic carbon (TOC) content reaches up to 6.07 wt.%, with an average of 2.66 wt.%. The vitrinite reflectance is 1.6–2.28%, with an average of 2.05%. The methane adsorption capacity is 0.84–4.69 m3/t, with an average of 2.92 m3/t. Pores and fractures are developed in the shale reservoirs. The main reservoir space is composed of connected mesopores with an average porosity of 4.78%. The characteristics and development potential of the shale reservoirs in the Lower Silurian Longmaxi Formation are controlled by the following factors: (1) the widespread deep-water shelf deposition in wellblock XN111 was a favorable environment for the development of high-quality shale reservoirs with a cumulative thickness of up to 50 m; (2) the high TOC content enabled the shale reservoir to have a high free gas content and a high adsorptive gas storage capacity; and (3) the shale's high maturity or over maturity is conducive to the development of pores and fractures in the organic matter, which effectively improves the storage capacity of the shale reservoirs. The reservoir characteristic index was constructed using the high-quality shale's thickness, gas content, TOC, fracture density, and clay content. Using production data from shale gas wells in adjacent blocks, a mathematical relationship was established between the Estimated Ultimate Recovery (EUR) of a single well and the Reservoir Characteristics Index (Rci). The EUR of a single well in wellblock XN111 was estimated. [ABSTRACT FROM AUTHOR]

The lower Silurian Longmaxi Formation hosts a highly productive shale gas play in the Zhaotong region of southern China. According to core observation, X-ray diffraction analyses, and scanning electron microscopy (SEM) observations, the shale comprises primarily quartz, carbonate minerals, and clay minerals, with minor amounts of plagioclase, K-feldspar, and pyrite. The clay mineral content ranges from 15.0% to 46.1%, with an average of 29.3% in the Zhaotong region. Organic geochemical analyses show that the Longmaxi Formation has good potential for shale gas resources by calculating total organic carbon, vitrinite reflectance, and gas content. Scanning electron microscope images demonstrate that reservoir pore types in the Longmaxi shale include organic pores, interparticle pores, intercrystalline pores, intraparticle pores, and fractures. Reservoir distribution is controlled by lithofacies, mineral composition, and geochemical factors. In addition, we investigated the relationships between reservoir parameters and production from 15 individual wells in the Zhaotong region by correlation coefficients. As a result, the brittleness index, total organic carbon (TOC), porosity, and gas content were used to define high-quality reservoirs in the Longmaxi shale. Based on these criteria, we mapped the thickness and distribution of high-quality reservoirs in the Longmaxi Formation and selected highlighted several key sites for future exploration and development. [ABSTRACT FROM AUTHOR]

Currently, Luzhou in the Sichuan Basin is a focal point for shale-gas exploration and development in China. However, a lack of detailed research on the mineral composition of the Wufeng Formation-Longmaxi Formation (WF-LF) shale is hindering the extraction of deep-buried shale gas in the Luzhou shale play. Herein, a field emission scanning electron microscope (FESEM) equipped with the Advanced Mineral Identification and Characterization System (AMICS) software was employed to analyze the mineral composition of the WF-LF shale from six wells in Luzhou. Quartz was the dominant mineral type, (16.9–87.21%, average 51.33%), followed by illite, calcite, dolomite, and pyrite. Our study revealed that (1) quartz content showed a moderate positive correlation with the total organic carbon (TOC) content, indicating that the quartz found in the shale is mostly of biological origin; and (2) the sum content of siliceous minerals and carbonaceous minerals was moderately positively correlated with the brittleness index (BRIT) in well SS1H2-7 and in the well group of RS8 and RS5, indicating that the siliceous minerals and carbonaceous minerals had an active effect on reservoir compressibility. Finally, according to the mineralogical features of each sublayer, we identified four types of reservoirs to determine their scope for exploration. [ABSTRACT FROM AUTHOR]

In this study, shale cores from 20 wells in the S1l11-1 sublayer of Longmaxi Formation buried in shallow shale (<3500 m) and deep shale (>3500 m) in the southern Sichuan Basin, China were collected to compare their pore structures and gas-bearing properties using multiple experiments. Results showed that the deep layer has relatively lower brittle mineral content, which is disadvantageous in terms of the higher requirements it imposes on hydraulic fracturing. Results also showed that the most important factor controlling the differential enrichment of S1l11-1 shale gas in southern Sichuan Basin is porosity. Moreover, the porosity composition of shallow shale and deep shale has significant differences: the porosity of shallow shale is dominated by organic pores, while for deep shale, both organic and inorganic pores are important. The inorganic pores provide significant storage space for free gas in deep shale; their contribution warrants more attention. We also found that the difference in organic porosity of the shallow and deep shale samples resulted from large differences in pore development ability, while the highest inorganic porosity was concentrated near the optimal mineral composition when the content of quartz plus feldspar plus pyrite was about 70%. This study revealed the primary factor controlling the difference in gas content between shallow and deep shale and detailed the characteristics of microscopic pore structure, providing a basis for the exploration and development of deep shale gas in the Wufeng-Longmaxi Formation in the southern Sichuan Basin. [ABSTRACT FROM AUTHOR]

• 106 Wufeng-Longmaxi shale samples are utilized to evaluate 12 inversion models. • Correlation Analysis of PSDs from LTCA, LTNA isotherms and LAM-SEM images. • Disclosing PSD difference and underlying mechanism with different models. • CO 2 -GCMC and N 2 -Sl/Cy-QSDFT-Equ are selected as the most suitable inversion models. • Both LTCA and LTNA methods are needed to obtain SSA that affects methane adsorption. The pore space in gas shale spans multiple scales, ranging from nanometers to micrometers with an extremely complex structure and strong microscopic heterogeneity. Existing low-temperature gas adsorption (LTGA) pore size distribution (PSD) analysis models are based on the assumption of a one-dimensional tubular model and there is a lack of sufficient basis for selecting the most appropriate inversion model among the various types available. In this study, a comprehensive characterization of numerous samples from the Wufeng and Longmaxi Formation in the southern Sichuan Basin was conducted using different methods and inversion models. Based on multiple dimensions, such as fitting errors, the correlation between different methods including low-temperature CO2 adsorption (LTCA), nitrogen adsorption (LTNA), and large-scale mosaic Scanning Electron Microscopy (LAM-SEM), the most suitable one-dimensional models for LTCA and LTNA PSD analysis for the studied shale samples are determined. The simulation of gas condensation processes on LAM-SEM images yielded pore volume (PV) in the range of 32–48 nm comparable to the PV characterized by LTNA. Furthermore, the differences observed in PSDs between the gas condensation simulation procedure and the equivalent circular area diameter method indicate that irregular corner regions within larger pores are attributed to the volume of smaller-sized pores during gas adsorption characterization. It is revealed that the correlation between stitched surface area (SA) and maximum methane adsorption is stronger than individual characterizations, indicating that both micropores and mesopores contribute significantly to adsorption, and both characterization methods need to be employed to obtain SSA that influences methane adsorption. The research findings are helpful to the improvement of the multi-scale pore characterization level and evaluation of shale reservoirs. [ABSTRACT FROM AUTHOR]

• High-pressure methane adsorption isotherms of 106 Wufeng-Longmaxi shales are measured. • Organic matter and clay are main compositions controlling factors of methane adsorption. • The isotherm of a shale is a linear superposition of those of its organic matter and clay. • V L , P L and ρ ads are found to be definite but different for unit organic matter and clay. • A quantitative composition-based model for adsorbed methane amount are proposed. The Wufeng-Longmaxi Formation shale in Sichuan Basin is the main strata of shale gas exploration and development in China. Adsorbed methane is an important part of the total shale gas content. The influence of shale composition on adsorption characteristics is complex, and it is difficult to obtain a comprehensive understanding without a sufficient amount of data. In this work, the total organic carbon (TOC), X-ray diffraction (XRD) mineral analysis, and the excess methane adsorption isotherms with pressure up to 50 MPa at 40 °C of 106 overmature shale samples with TOC of 0.8%-9.0% and clay content of 2%-58% that belong to Wufeng-Longmaxi formation from 10 shale gas wells in Sichuan Basin, China are experimentally investigated and analyzed. New correlations found between compositions and methane adsorption characteristic parameters guide the establishment of a composition-based methane adsorption model that the excess adsorption isotherm of shale is the content-weighted sum of equivalent unit-content excess isotherms for organic matter and clay. With this model, the differences of excess isotherms of these two compositions and the differences of clay-contribution to methane adsorption for different sublayers are disclosed. It is beneficial to improve the accuracy of shale reservoir evaluation of studied blocks under the condition of limited coring and deepening the understanding of the underlying mechanism of methane adsorption characteristics. [ABSTRACT FROM AUTHOR]