Search

Although polymer-based self-lubricating materials have rapidly developed recently, intelligent lubricating materials with self-adaptable lubrication with external conditions changing are highly demanded, especially for harsh conditions. Herein, a shape memory epoxy resin based on the biphenyl units (BPEP) with tunable tribological behavior was systematically studied. X-ray diffraction (XRD), field emission scanning electron microscope (SEM), laser confocal three-dimensional profiler, and optical microscope were applied to analyze the friction and wear mechanism. Due to the presence of the specific biphenyl structural units, which could be performed a switching phase between crystalline and amorphous, that allows the self-assembly of the polymer chain under π–π interaction. As a result, the improving mechanical properties enable the BPEP to perform outstanding self-lubricating in a wide temperature range, and the friction coefficient (COF) can be tuned in a wide range of 0.10~0.175 by adjusting the temperature. The shape memory effect of the polymer refers to modulus changing and heat conversion during the shape morphing, and a thermal tunable tribological was observed based on the physicochemical properties varying of polymer with temperature changing. The shape memory effect of BPEPs drives the wear self-compensation so that a low wear rate (6.94 × 10−5 mm3 N−1 m−1) at 110 °C was obtained. The superb lubricating properties of this BPEP could broaden the application scope of shape memory polymers in the field of intelligent lubricating materials, and it is expected to guide future studies on the thermal regulating of tribological behavior. [ABSTRACT FROM AUTHOR]

Near‐infrared (NIR) light responsive shape memory polymers (SMPs) can realize remotely and regionally controlled shape changing that shows broad potential applications. Herein, an NIR‐responsive shape memory polymer (G/PNs) is prepared by introducing reduced graphene oxide to liquid crystal elastomers‐based polymer networks (PNs). The G/PNs present regulated reversible stress by tuning the NIR light irradiation. Furthermore, since the G/PNs are 3D‐printed with designed structure, the deformed 3D printing structure can be regionally patterned with varied shapes by controlling the moving path of NIR laser. In addition, the stress relaxation and cyclic stress–strain measurements are further studied to reveal the energy loss during the deformation and shape memory cycles. In compare with the previous work, the SMP networks provide a rather high reversible actuation stress and can realize remotely control by NIR. The NIR‐encoded shape memory effect can be used as actuators, artificial muscles. [ABSTRACT FROM AUTHOR]

Shape memory epoxy resin (SMEP) with tailorable properties has gained wide attention. Herein, a series of photocured diphenyl epoxy with excellent shape memory effects, based on the epoxy monomer diglycidyl ether of biphenyl (DGEBP) and M‐xylylenediamine (MXDA), is fabricated. Fourier transform infrared spectrometer (FTIR) is used to verify the mix‐curing process. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), polarized light microscope (POM), and X‐ray diffraction (XRD) are applied to analyze the microstructure of the film. The molar ratio of the raw material and the post‐heating could tune the crosslinking density, which allows the prepared epoxy resin to present a tailorable shape memory effect. Besides, this epoxy resin exhibits an excellent triple‐shape memory effect due to the wide transition temperature. It is worth of noting that post‐heating induced the self‐assembly of biphenyl unit of the lamellar structure due to π–π interactions that causes an adjustable shape memory effect. This work offers a novel SMEP with potential application in the thermal history trace field. [ABSTRACT FROM AUTHOR]

• Hyperbranched polyurethane was applied through grafting epoxy resin to obtain interpenetrating polymer networks. • Crosslinking network points help enhancing thermal and mechanical properties. • All interpenetrating polymer networks express excellent shape memory effect. In this article, a type of hyperbranched polyurethane (HBPU) with triazine structure was successfully synthesized. Afterwards, HBPU was applied through grafting epoxy resin (EP) to fabricate the interpenetrating polymer networks (IPNs) with different ratio of HBPU/EP. The structure of HBPU prepolymer and the formation of the HBPU/EP IPNs were characterized and confirmed by Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared (FTIR) spectroscopy, and the nanoscale phase separation in IPNs composite was analyzed by Atomic Force Microscope (AFM). Besides, the thermal and mechanical results indicated that the IPNs structure enables the material with high strength and thermal stability. Shape memory cycles test demonstrated that the HBPU/EP INPs possess an excellent shape memory performance, and the best shape fixity and recovery were presented by IPNs composite with 20 wt% HBPU. [ABSTRACT FROM AUTHOR]