Search

This paper proposes a single-stage direct AC to high-frequency (HF) AC resonant converter based on LLC configuration for induction heating (IH) systems or HF applications. Unlike conventional converters for IH systems, the proposed topology converts the utility frequency to HF AC in a single stage without using a DC link inductor and capacitors and takes the advantages of LLC configuration. Additionally, it improves the power factor to 0.9–1, lowers the THD (3.2% experimentally), and protects against the high-frequency components. An embedded control scheme was designed to keep the HF current oscillating at a resonant frequency, ensuring zero-voltage switching. The operating principle of the proposed topology was investigated using mathematical equations and equivalent circuits. Finally, it was verified using computer simulation, and an experimental prototype of 1.1 kW was developed to demonstrate the proposed topology's uniqueness. [ABSTRACT FROM AUTHOR]

In this article, basic cell (BC) of a novel swi-tched capacitor converter (SCC) has been proposed first. After that, the generalized structure of proposed SCC is developed. The developed SCC requires reduced number of switches, drivers, diodes, capacitors, and lower number of conducting switches in current flow paths and capacitor charging paths as compared to the other recently developed SCCs. A switched capacitor multilevel inverter (SCMLI) utilizing two numbers of generalized SCCs is developed next. Further, cascaded extension of proposed SCMLI is realized and analyzed for symmetric and asymmetric dc source configurations. A detail analysis of optimum selection of capacitance for switched capacitors of 13-level SCMLI is presented. An extensive comparison study shows that the proposed SCMLI requires lower number of components as compared to other SCMLIs. Further, the proposed structure has minimum cost function per level per boosting factor as compared to the other SCMLIs. Extensive experimental results considering fundamental switching frequency scheme are presented to validate the merits and effectiveness of the proposed structure. [ABSTRACT FROM AUTHOR]

For providing better reliability and getting minimal harmonics, multilevel inverters are commonly employed in grid connected photovoltaic systems. This paper presents 27 level inverter with reduced switch topology to get better reliability with low harmonics. This inverter performance completely relies on EANFIS controller which is the combination of ANFIS and Emperor Penguin Optimization (EPO) algorithm. Working procedure of ANFIS will be optimized by EPO to make us easy to deal MLI switching angle and produce harmonic-less control voltage. EPO provides efficient result by means of computational complexity, time and space complexity. In our work, this is the main reason to select EPO for optimizing ANFIS controller. The proposed work will be implemented in Simulink working environment. Resultant outcomes like inverter output, controller output and THD analysis will be compared with recently developed existing works. [ABSTRACT FROM AUTHOR]

In this paper, a novel structure of switched capacitor converter (SCC) is proposed. First, the basic unit of the proposed SCC is presented. After that, a generalized structure of the proposed SCC is discussed. The presented SCC uses one dc source, several switches, diodes, and capacitors to produce multistep dc boosted output voltage. The capacitors in the SCC can be charged in trinary asymmetrical pattern. A detailed comparative study between the proposed and other recently developed SCC structures is presented. It is shown that the proposed SCC can produce an output voltage level with lower total standing voltage and lower maximum switch stress voltage as compared to most of the suggested SCC structures. Further, a switched capacitor multilevel inverter (SCMLI) based on cross-switched multilevel inverter has been developed and analyzed for symmetric and asymmetric dc source configurations. For fair comparison with the existing SCMLI structures, the overall cost of the structures is compared based on a cost function (CF). The proposed SCMLI provides lower cost function/output voltage level (CF/NL) in comparison with most of the other SCMLI structures for both symmetric and asymmetric dc source configurations. Extensive experimental studies validate the operation and performance of the proposed SCMLI structure. [ABSTRACT FROM AUTHOR]

A novel circuit topology of modified switched boost high frequency hybrid resonant inverter fitted induction heating equipment is presented in this paper for efficient induction heating. Recently, induction heating technique is becoming very popular for both domestic and industrial purposes because of its high energy efficiency and controllability. Generally in induction heating, a high frequency alternating magnetic field is required to induce the eddy currents in the work piece. High frequency resonant inverters are incorporated in induction heating equipment which produce a high frequency alternating magnetic field surrounding the coil. Previously this high frequency alternating magnetic field was produced by voltage source inverters. But VSIs have several demerits. So, in this paper, a new scheme of modified switched boost high frequency hybrid resonant inverter fitted induction heating equipment has been depicted which enhances the energy efficiency and controllability and the same is validated by PSIM. [ABSTRACT FROM AUTHOR]

This article introduces an innovative three-load AC–AC converter topology and employs a hybrid control technique, incorporating pulse frequency modulation and asymmetrical duty cycle control. The innovation addresses inherent limitations in conventional induction heating systems. The proposed topology incorporates three legs, delivering power to multiple loads operating at distinct frequencies based on the unique physical characteristics of each load. The first converter leg maintains a fixed 50% duty cycle, optimising output through the implementation of PFM. Meanwhile, the remaining two converter legs operate by ADC to attain maximum power with independent power control for different vessels. The primary objective is to efficiently heat both non-ferromagnetic and ferromagnetic vessels. The PSIM platform simulation results are in close agreement with hardware results, validating the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]