Search

This paper proposes a buffered microgrid with a modular grid interface consisting of a modular back-to-back converter. The proposed method provides a flexible strategy that enables both the load and generation expansion of the microgrid, with no sizing constraints on the initial stage. The method maintains the physical separation of the buffered microgrid from the grid by using back-to-back converters, which ensures a safe, secure and seamless operation in both islanded and grid-connected operation modes. The proposed modular structure allows an energy exchange prioritization either between the energy storage systems and the grid or between the energy storage units themselves, depending on the recommended/desired operational strategy. The prioritizations are achieved by using sets of dead zones in the control of the interfacing converters. In order to control the voltage and frequency, an inverse-droop-based dq-frame current control method was implemented in PSCAD/EMTDC to substantiate the proposed method. The simulation results of different scenarios show the operational flexibility, control simplicity and communication-free operation of the microgrid with different types of sources. [ABSTRACT FROM AUTHOR]

This article proposes a new active power flow controller for dc–dc multiactive bridge (MAB) converters with minimum current point tracking (MCPT) to minimize conductive losses. Unlike recent efforts in this area, the proposed controller does not require look-up table for implementation nor complex nonlinear converter modeling and is not circuit parameter dependent. The proposed control scheme is also generalized for MAB converters with any number of ports and is derived in per unit form to enable standard implementation for buck/boost/unity-gain operating modes. The proposed MCPT algorithm is based on an innovative adaptive perturb and observe tracking of the minimum current point (MCP) on the MAB converter current characteristic plane. This MCP is tracked while active power regulation is simultaneously achieved based on a new phase shift decoupler to enable direct regulation of individual port active power. Detailed design procedure of the proposed controller is presented and extensive simulation is carried out to validate the effectiveness of the proposed MCPT closed loop controller. Experimental implementation is also provided to substantiate the simulation results. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive and generalized analysis of the bidirectional dual active bridge (DAB) dc–dc converter using triple phase shift (TPS) control to enable closed-loop power regulation while minimizing current stress. The key new achievements are a generic analysis in terms of possible conversion ratios/converter voltage gains (i.e., Buck/Boost/Unity), per unit based equations regardless of DAB ratings, and a new simple closed-loop controller implementable in real time to meet desired power transfer regulation at minimum current stress. Per unit based analytical expressions are derived for converter ac rms current as well as power transferred. An offline particle swarm optimization (PSO) method is used to obtain an extensive set of TPS ratios for minimizing the rms current in the entire bidirectional power range of –1 to 1 per unit. The extensive set of results achieved from PSO presents a generic data pool, which is carefully analyzed to derive simple useful relations. Such relations enable a generic closed-loop controller design that can be implemented in real time avoiding the extensive computational capacity that iterative optimization techniques require. A detailed Simulink DAB switching model is used to validate the precision of the proposed closed-loop controller under various operating conditions. An experimental prototype also substantiates the results achieved. [ABSTRACT FROM AUTHOR]

This study presents a high-performance controller based on the Lyapunov stability criterion that enhances the dynamic performance and disturbance rejection capability of resonant DC/DC converters when compared with classical PI control. The series–parallel resonant converter (SPRC) is used as the candidate converter to which this controller design is applied but the design can be generalised to other types of resonant DC/DC converters. By using a multiple module approach, low-power modules of this resonant converter are stacked to enable operation at medium-voltage DC (MVDC). The proposed controller design is applied to modular structure of the SPRC to verify its high-performance output in conjunction with active sharing control loops that ensure uniform current/voltage distribution across the multiple interconnected modules. Detailed controller design, closed-loop stability criteria, robustness and parameter sensitivity are investigated and controller performance is compared and verified against the classical PI control in simulation and low-scaled experimental prototype. Operations in single-module and two-module input-series output-parallel modes are both studied. The study affirms the selection of the modular DC/DC converter architecture and its associated proposed controls for high-performance MVDC applications. [ABSTRACT FROM AUTHOR]