Search

Terraced landscapes represent one of the most widespread human-induced/man-made transformations of hilly-mountainous environments. Slope terracing produces peculiar morphologies along with unusual soil textures and stratigraphic features, which in turn strongly influence slope hydrology. The investigation of the hydrological features of terraced soils is of fundamental importance for understanding the hydrological dynamics occurring in these anthropogenic landscapes, especially during rainfall events. To this purpose, the availability of extensive field monitoring data series and of information on subsoil properties and structure is essential. In this study, multi-sensor hydrological data were acquired over a period longer than 2 years in the experimental site of Monterosso al Mare, in the Cinque Terre National Park (Liguria region, Italy), one of the most famous examples of terraced landscape worldwide. Monitoring data were coupled with accurate engineering-geological investigations to achieve the hydro-mechanical characterization of backfill soils and to investigate their hydrological response at both the seasonal and the single rainstorm scale. The results indicated that the coarse-grained, and anthropically remolded texture of the soils favors the rapid infiltration of rainwater, producing sharp changes in both soil volumetric water content and pore water pressure. Furthermore, the pattern of hydrological parameters showed seasonal trends outlined by alternating phases of slow drying and fast wetting. The study outcomes provide useful insights on the short and long-term evolution of hydrological factors operating in agricultural terraces. These findings represent a useful basis for a better understanding of the time-dependent processes that guide water circulation in terraced systems, which have a key role in controlling the occurrence of erosion and landslide processes. [ABSTRACT FROM AUTHOR]

Landslides represent a severe geohazard in many countries. The availability of inventories depicting the spatial and temporal distribution of landslides is crucial for assessing landslide susceptibility and risk for territorial planning or investigating landscape evolution. Nevertheless, these inventories are usually affected by limitations due to their nonpublic availability and inhomogeneities in characterization and mapping. Such problems are fully recognizable by the analysis of the multiple landslide inventories of the Campania region, which is one of the Italian regions with the highest exposure to landslide hazard and risk. On this basis, a revised Landslide Inventory of the Campania region (LaICa), resulting from the processing of multiple existing landslide inventories, has been reconstructed. It aims to (i) provide a new geodatabase that is able to overcome issues derived from the coexistence of multiple inventories and (ii) provide a methodological paradigm able to support the reorganization of existing official inventories. The implication of LaICa, with its 83,284 records, will possibly improve the assessment of landslide susceptibility and then reassess the related risk. Measurement(s) landslide Technology Type(s) Data Set [ABSTRACT FROM AUTHOR]

Flow-like landslides triggered by rainfall are a major concern in the peri-Vesuvian region of southern Italy. On December 19th, 2019, a landslide occurred along the Crocelle slope (Sarno Mountains), which had previously experienced a similar event in February 1986. This study was conducted to assess the characteristics of this event in terms of triggering and propagation conditions and, with reference to the 1986 landslide, to evaluate the evolution of residual landslide hazards at recurring landslide sites. Data collection included field surveys, visual analysis of a Unmanned Aerial Vehicle (UAV)-based photogrammetric model, geotechnical laboratory testing, rainfall and slope stability analysis, and propagation modeling. Results suggest that the landslide i) originated below a trail, ii) involved an initial volume of 450 m3, which did not significantly grow due to the limited entrainment of slope sediments, iii) was initiated after 13 h of rainfall (return period ∼4 years), and iv) propagated along a channel with an estimated velocity of up to 10 m/s. Comparison of the 2019 event with the 1986 event revealed a significant difference in terms of landslide magnitude (i.e., volume), potentially due to the occurrence of multiple events, which may have led to the temporal depletion of available materials along a slope repeatedly affected by landslides, and possibly to the different behavior of primary layered deposits (involved in the 1986 event) compared to reworked deposits (involved in the 2019 event). This suggests a reduction in the residual landslide hazard associated with a decrease in the expected magnitude and frequency of prospective events. • The 2019 Palma Campania landslide was initiated following 13 h of precipitation; • The landslide encompassed reworked pyroclastic deposits underneath a trail; • The landslide propagated within a channel with a velocity of up to 10 m/s; • Slope failure is facilitated by prior hydrological conditions; • Slope-scale landslide hazard potentially decreases due to multiple landslides. [ABSTRACT FROM AUTHOR]

Incorporating the influence of soil layering and local variability into the parameterizations of physics-based numerical models for distributed landslide susceptibility assessments remains a challenge. Typical applications employ substantial simplifications including homogeneous soil units and soil-hydraulic properties assigned based only on average textural classifications; the potential impact of these assumptions is usually disregarded. We present a multi-scale approach for parameterizing the distributed Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability (TRIGRS) model that accounts for site-specific spatial variations in both soil thickness and complex layering properties by defining homogeneous soil properties that vary spatially for each model grid cell. These effective properties allow TRIGRS to accurately simulate the timing and distribution of slope failures without any modification of the model structure. We implemented this approach for the carbonate ridge of Sarno Mountains (southern Italy) whose slopes are mantled by complex layered soils of pyroclastic origin. The urbanized foot slopes enveloping these mountains are among the most landslide-prone areas of Italy and have been subjected to repeated occurrences of damaging and deadly rainfall-induced flow-type shallow landslides. At this scope, a primary local-scale application of TRIGRS was calibrated on physics-based rainfall thresholds, previously determined by a coupled VS2D (version 1.3) hydrological modeling and slope stability analysis. Subsequently, by taking into account the spatial distribution of soil thickness and vertical heterogeneity of soil hydrological and mechanical properties, a distributed assessment of landslide hazard was carried out by means of TRIGRS. The combination of these approaches led to the spatial assessment of landslide hazard under different hypothetical rainfall intensities and antecedent hydrological conditions. This approach to parameterizing TRIGRS can be adapted to other spatially variable soil layering and thickness to improve hazard assessments. [ABSTRACT FROM AUTHOR]

The new standards on energy saving for new and existing buildings have animated both researchers and technicians in recent years, aiming at reducing the dependence on fossil fuels, improving indoor comfort, and systems efficiency. In this scenario, special attention must be paid to historical buildings that need to preserve their key testimonial heritage within the society. This paper describes the design and realization stages of a pilot system based on a ground-coupled heat pump, operating both in heating and cooling modes, installed in the monumental site of Saints Marcellino and Festo (SM&F), in Naples, Southern Italy. This study aims to demonstrate that low-enthalpy geothermal systems can be employed as energy retrofit applications in buildings of historical, artistic, and cultural interest and, at the same time, to prove that the use of this technology allows achieving the objectives, set at global level by the current regulations, and requiring a reduction of carbon dioxide emissions (tCO2) of 53% compared to technology using fossil fuels. [ABSTRACT FROM AUTHOR]

An increasing number of satellite platforms provide daily images of the Earth's surface that can be used in quantitative monitoring applications. However, their cost and the need for specific processing software make such products not often suitable for rapid mapping and deformation tracking. Google Earth images have been used in a number of mapping applications and, due to their free and rapid accessibility, they have contributed to partially overcome this issue. However, their potential in Earth's surface displacement tracking has not yet been explored. In this paper, that aspect is analyzed providing a specific procedure and related MATLAB™ code to derive displacement field maps using digital image correlation of successive Google Earth images. The suitability of the procedure and the potential of such images are demonstrated here through their application to two relevant case histories, namely the Slumgullion landslide in Colorado and the Miage debris-covered glacier in Italy. Result validation suggests the effectiveness of the proposed procedure in deriving Earth's surface displacement data from Google Earth images. [ABSTRACT FROM AUTHOR]

The change of the Earth's climate and the increasing human action (e.g., increasing impervious areas) are influencing the recurrence and magnitude of flooding events and consequently the exposure of urban and rural communities. Under these conditions, flood hazard analysis needs to account for this change through the adoption of nonstationary approaches. Such methods, showing how flood hazard evolves over time, are able to support a long-term plan of adaptation in hazard changing perspective, reducing expected annual damage in flood prone areas. On this basis, in this paper a reevaluation of flood hazard in the Benevento province of southern Italy, is presented, providing a reduced complexity methodological framework for near future flood hazard prediction under nonstationary conditions. The proposed procedure uses multiple nonstationary probability models and a LiDAR-derived high-resolution inundation model to provide present and future flood scenarios in the form of hazard maps. Such maps are derived using a spatialization routine of stage probability across the inundation model that is able to work at different scales. The analysis indicates that, overall, (i) flood hazard is going to decrease in the next 30 years over the Benevento province and (ii) many areas of the Calore river floodplain are going to be subject to higher return level events. Consequently, many areas would require new guidelines of use as the hazard level decreases. Limitations of the analysis are related to the choice of the probability model and the parameter estimation approach. A further limit is that, currently, this method is not able to account for the presence of mitigation measurements. However, result validation indicates a very high accuracy of the proposed procedure with a matching degree, with a recently observed 225-years flood, estimated in 98%. On this basis, the proposed framework can be considered a very important approach in flood hazard estimation able to predict near future evolution of flood hazard as modulated by the ongoing climate change. [ABSTRACT FROM AUTHOR]

On the 4th and 5th of March 2005, about 100 rainfall-induced landslides occurred along volcanic slopes of Camaldoli Hill in Naples, Italy. These started as soil slips in the upper substratum of incoherent and welded volcaniclastic deposits, then evolved downslope according to debris avalanche and debris flow mechanisms. This specific case of slope instability on complex volcaniclastic deposits remains poorly characterized and understood, although similar shallow landsliding phenomena have largely been studied in other peri-volcanic areas of the Campania region underlain by carbonate bedrock. Considering the landslide hazard in this urbanized area, this study focused on quantitatively advancing the understanding of the predisposing factors and hydrological conditions contributing to the initial landslide triggering. Borehole drilling, trial pits, dynamic penetrometer tests, topographic surveys, and infiltration tests were conducted on a slope sector of Camaldoli Hill to develop a geological framework model. Undisturbed soil samples were collected for laboratory testing to further characterize hydraulic and geotechnical properties of the soil units identified. In situ soil pressure head monitoring probes were also installed. A numerical model of two-dimensional variably saturated subsurface water flow was parameterized for the monitored hillslope using field and laboratory data. Based on the observed soil pressure head dynamics, the model was calibrated by adjusting the evapotranspiration parameters. This physically based hydrologic model was combined with an infinite-slope stability analysis to reconstruct the critical unsaturated/saturated conditions leading to slope failure. This coupled hydromechanical numerical model was then used to determine intensity–duration (I-D) thresholds for landslide initiation over a range of plausible rainfall intensities and topographic slope angles for the region. The proposed approach can be conceived as a practicable method for defining a warning criterion in urbanized areas threatened by rainfall-induced shallow landslides, given the unavailability of a consistent inventory of past landslide events that prevents a rigorous empirical analysis. [ABSTRACT FROM AUTHOR]

Deep-seated landslides are important agents of relief shaping and can have substantial impact on human settlements. Many examples are present in the Campania region of southern Italy, where the association of complex lithostratigraphic and structural geologic conditions might have effect on landslide initiation and evolution. On this basis and considering the effect that the deep-seated landslide have had in the last years on the urban settlement, the Buonalbergo landslide was analyzed in terms of decadal kinematics and geological control and insights in prospective evolution were provided. The analysis of data derived by geological and landslide field mapping, settlement damage analysis, Persistent Differential Interferometry SAR data analysis, and Finite Elements stability analysis revealed i) the approximately constant rate movement of the landslide in the last three decades with a consistent enlargement of its area, ii) the presence of a large overturned anticline, characterized by a complex lithostratigraphic arrangement and multiple discontinuity sets, iii) the presence of faults responsible for morphological depression development, iv) a rotational mechanism characterizing the upper sector of the landslide and the ongoing translational sliding of blocks located at its toe and v) the effect of potential pore pressure scenarios on prospective kinematics (i.e. single to multiple stages creep) with the observed constant rate movement potentially related to a pore pressure at the landslide base ranging between 300 and 400 kPa. Result interpretation suggests i) the role of the structural and lithostratigraphic setting of the slope as predisposing factor for landslide development, ii) the potential of fold-related fabric in controlling landslide geometry and fragmentation, iii) the possible occurrence of multiple landslide events affecting the slope affected by the deep-seated landslide and iv) the potential of hydrologic conditions in modulating landslide velocity and evolution toward slope failure. The relevance of results is related to the representativeness of the Buonalbergo landslide as common process in the Apennine context in terms of potential long-term morphologic evolution of the slope and the existence of many landslides that develop in similar geological conditions driving sediment production and inducing persistent topographic changes in mountainsides. [ABSTRACT FROM AUTHOR]

Natural hazards such as landslides, soil erosion and floods are increasingly affecting many regions of the world in relation to ongoing climate change and the abandonment of rural areas. In the last decades, the need to mitigate such phenomena and preserve natural resources, including landscapes, has motivated a number of local and national authorities to promote the use of soil bioengineering techniques. Consequently, these techniques have been increasingly used with variable success rates. This study analysed the efficiencies of different bioengineering structures to mitigate geo-hydrological risks by examining the interventions installed between 2007 and 2013 in the Avellino Province southern Italy. To this end, a specific project consistency analysis and functionality classification were carried out and the causes of inefficiencies were identified. The analysis showed that after a few years, only a small number of the installed bioengineering structures were fully functional and efficient. Overall, the installed structures were generally affected by maintenance issues and in many cases they suffered from design and execution issues, inducing a generally lower degree of efficiency, with most of them classified as 'not very efficient'. The conclusions of this work are that i) the long-term efficiency of a bioengineering structure is related to its correct design, installation, and maintenance; ii) the design of a bioengineering structure should account for the geological, geotechnical and hydrological characteristics of the area of interest, and iii) maintenance must not affect the short-term efficiency of a structure, but may affect the long-term efficiency. • The efficiency of bioengineering structure was analysed. • Bioengineering structure functionality was estimated three years after the installation. • A matrix-based approach accounting for causes of inefficiency was used. • Only 7% of the interventions were fully working and integrated with the landscape. • Most of the bioengineering structures were affected by design and installation issues. [ABSTRACT FROM AUTHOR]

• A tool to detect spatio-temporal landslide-induced effects on buildings is presented. • Building performace is investigated by DInSAR and structural analyses. • Pre- and post-repair intervention is analyzed by DInSAR time-series. Slow-moving landslides are a natural hazard which affects wide areas in the world and often are cause of significant damage to structures and infrastructures. Analysis of landslide evolution and of their interaction with existing man-made structures plays a key role in risk prevention and mitigation activities. To this purpose, a considerable interest towards innovative approaches has grown among the scientific community and land management institutions. In this work, Synthetic Aperture Radar data acquired by C-band and X-band sensors, combined with numerical analyses, have been successfully applied as a tool to detect spatial and temporal landslide-induced effects, in terms of deformations and structural behavior of a building affected by ground instability. Such approach has been applied to Moio della Civitella urban settlement (Salerno province, Italy), whose whole territory is interested by several slow-moving landslides. In detail, performance of a masonry building aggregate and the efficacy of restoration works have been investigated through an integrated assessment of displacement time-series pre- and post-repair intervention, and structural analysis performed with numerical code. Historical DInSAR data have permitted firstly the interpretation of building displacement time-series corresponding to pre- and post-works configurations; subsequently, the analysis of interpolated interferometric products has allowed to define gradient maps of vertical and horizontal displacements and to identify part of aggregate which can suffer a greater susceptibility to damage as a consequence of deformation gradients. Finally, the comparison of satellite and numerical data showed a substantial agreement with local failures and damage surveyed, thus confirming the capability of DInSAR technique to investigate building performance where no in situ displacement measurements were available. [ABSTRACT FROM AUTHOR]

The complex landslide of Agnone, located in Molise Region (southern Italy), is a large deep-seated roto-translational slide, involving terrigenous flysch sequences and evolving in the lower portion, in an earth flow. First evidences of landslide activities date back to early 1900s and keep on moving in several time spans up to nowadays. This work illustrates the contribution of multiple optical and radar remote sensing data to landslide investigation approximately across a century as well as to mapping and monitoring ground displacements at the catchment scale.In particular, we firstly revised information from scientific literature and technical reports, compiling monitoring data acquired through inclinometers and geo-morphological surveys in preceding studies to characterize the geological setting of the area. Additionally, we used GPS data acquired from 2010 to 2015 to monitor ground surface motions on some benchmarks of the area. Then, we exploited remotely-sensed data in order to in-depth investigate the spatial and temporal evolution of the landslide-affected catchment.The use of historical air-photos enabled the generation of 3D models by means of the Structure for Motion (SfM) technique to detect, map and monitor unique geomorphological landscapes across several decades. Historical and recent sets of optical photographs from 1945 to 2003 were used in the study area to perform 3D reconstructions and analyze the geomorphological enlargement of the Agnone landslide over 60 years. Radar satellite images acquired by ERS1/2 and ENVISAT constellations at medium spatial resolution, in the spanning time 1992-2010, and by COSMO-SkyMed at high resolution, covering the period 2012-2015, were processed through Persistent Scatterer Interferometry (PSI) techniques. The derived PSI data provided yearly velocities and time series of ground deformation with millimetric accuracy and were exploited for back-monitoring slow surface displacements and for better tracing the boundaries of the mass movement. All data were discussed and used to increase the knowledge about the ground motions affecting the whole Agnone landslide and the surrounding territory. Remotely-sensed data were also compared through in situ field checks to evaluate landslide-induced damage on structures and infrastructures within and close to the landslide body. Outcomes of these analyses demonstrated the operative usefulness of the combination of multi-temporal and multi-technique conventional and remote sensing data for the assessment of spatial and temporal evolution of landslides at basin scale. Moreover, the collected data allowed to plan countermeasures and mitigation actions on the Agnone area according to the distribution and intensity of the detected landslide hazard. [ABSTRACT FROM AUTHOR]