Search

Slurry shields rely on the formation of a compact filter cake to maintain excavation face stability and ensure construction safety. In strata with high permeability, significant slurry loss occurs, making filter cake formation and air tightness maintenance challenging. In this study, light organic walnut shell was selected as an additive coarse particle material for slurry. Slurries incorporating two types of coarse particles, sand and walnut shell, were prepared, and tests on slurry permeation and air tightness of the filter cake were conducted in three different strata. The results indicate that the addition of coarse particles effectively improves filter cake formation and air tightness in high-permeability strata. It is essential to use graded particles in highly permeable strata, with controlled maximum and minimum particle sizes. As the content of coarse particles increases, the air tightness of the filter cake initially increases and then decreases. Notably, the air tightness of filter cakes containing walnut shell is superior to those containing sand. Replacing sand with walnut shell as a slurry plugging material enhances filter cake quality in high-permeability strata. For highly permeable strata with a permeability coefficient greater than 1.0 × 10−3 m/s, an addition of 30 g/L to 40 g/L is recommended. [ABSTRACT FROM AUTHOR]

Hybrid nanoliquids are not underestimated for their involvement in microelectronics, transportation, coolant processes, ships, biological processes and power generation. Hence motivation for current work is to examine homogeneous-heterogeneous reactions in entropy optimized flow by curved sheet stretched with nonlinear velocity. Trihybrid nanoliquid is synthesized through 2 % of ferrous oxides (F e 3 O 4 ) , 2 % of silver (A g) and 2 % of copper (C u). Kerosene oil is employed as the base fluid. These specific kinds of nanoparticles are taken into consideration because of their numerous applications in heat dissipation, air filters, dynamic sealing, biosensors and catalysts process. Kerosene oil may have applications in many different domains such as energy storage, cleaning agent, portable heaters, fuel additive and industrial lubricants. Darcy-Forchheimer model is employed. Analysis in presence of radiation, dissipation, Ohmic heating, entropy generation and heat generation/absorption are organized. Unlike the previous considerations, the thermal expression here consists of impacts through Darcy-Forchheimer relation. Adequate transformations are implemented. Computations have been arranged by applying finite difference technique (FDM) using MATLAB. Quantities for physical interest are addressed. The presented analysis may have relevance for solar systems, chemical reacting processes, cooling towers and polymer data processes. The conclusions are also organized for important key findings. It is noticed that trihybrid nanomaterial has more entropy rate when compared with hybrid and classical nanoliquids when volume fraction is chosen as 2 % for trihybrid fluid. It is proposed that the ability to transfer heat is enhanced when nanoparticles are added to conventional fluids. Decay in concentration is noticed for both homogeneous and heterogeneous parameters. Reduction for Bejan number is noticed through homogeneous diffusion factor. Comparison with previous study is also presented and found great consensus between them. [ABSTRACT FROM AUTHOR]

Featured Application: To contain the diffusion of pathogens through air, a UV-C filter is optimized by CFD and ray tracing analysis guided by an MDO platform. Because of the recent COVID-19 pandemic, the problem of preventing and containing the diffusion of pathogens spread through air has become a main topic of research. The problem is particularly important for specific environments, such as dental or other medical practices, where the aerosol treatments in open-mouth patients, combined with closed and crowded rooms, raise the risk of infection. As an efficient countermeasure, in this study we propose a solution that is able to remove the risk at the source, through the aspiration of the aerosol and the neutralization of the bacterial load by means of a UV-C LED filter, which releases the sterilized air in the environment. To maximize the efficiency of the solution, in this study we performed a numerical multi-disciplinary optimization (MDO) of the filter, coupling numerical simulations of multiple disciplines (CFD and electromagnetics) by the process automation and optimization environment modeFRONTIER of ESTECO. Geometrical parameters of the filter are updated for each candidate solution proposed by the optimization algorithm, and their performance in terms of viral neutralization efficiency and air mass flow rate are evaluated by the simulations, until the optimal solution is found. The methodology and results of the study are presented. [ABSTRACT FROM AUTHOR]

Electrostatic fields are crucial for achieving the highly efficient filtration of airborne pollutants. However, the dissipation of static charges over time, especially under humid conditions, limits their practical application. In this study, we present a self-charging air filter (SAF) powered by a triboelectric nanogenerator (TENG). This SAF is integrated into a commercial mask, termed SAFM, which can effectively capture and degrade airborne pollutants without requiring an external power source. By leveraging the triboelectric effect during breathing, the TENG within the SAFM continuously replenishes static charges, maintaining the triboelectric field. The system employs a cellulose aerogel/Ti3C2Tx composite as the electron donor and an esterified cellulose-based electrospun nanofiber as the electron acceptor. Remarkably, the triboelectric field significantly enhances filtration performance, with the SAF achieving up to 95.7% filtration efficiency for particulate matter as small as 0.3 μm. This work underscores the potential of TENG-powered triboelectric fields in the development of multifunctional, human-machine interactive facemasks. [ABSTRACT FROM AUTHOR]

Air pollution is currently the most significant environmental factor posing a threat to the health and lives of European residents. It is a key cause of poor health, particularly respiratory and cardiovascular diseases. The primary aim of the study was to numerically determine the impact of the air purifier model's geometry on the distribution of air within a room and to conduct experimental tests on the filtration efficiency and preliminary antibacterial activity of filtration composites. The scope of the work included designing an air purifier model in the form of a pendant lamp and performing computer simulations in Ansys software to identify the optimal shape. The experimental research focused on developing filtration composites consisting of nonwoven fabric with an active hydrosol layer, meltblown nonwovens and a carbon filter. The study results showed that the SMMS composite with 50% thyme and carbon nonwoven exhibited the highest filtration efficiency for both small and large particles. [ABSTRACT FROM AUTHOR]

Background: An October, 2021 review of Public Health Ontario's COVID-19 guidance for congregate settings such as shelters and long-term care homes demonstrated that this guidance did not include references to ventilation or filtration. In April 2022, an interdisciplinary team with expertise in indoor air quality (IAQ), engineering, epidemiology, community programming and knowledge translation launched a virtual ventilation and filtration consultation program for community spaces in Toronto, Ontario. The program gives people working in community spaces direct access to IAQ experts through 25-min online appointments. The program aims to help reduce the risk of COVID-19 transmission in community spaces, and was designed to help compensate for gaps in public health guidance and action. Methods: Representatives from participating organizations (n. 27) received a link to an online survey via email in April 2023. Survey questions explored the impacts of the program on topics such as: purchase and use of portable air filters; maintenance and use of bathroom fans; and, maintenance and modification of HVAC systems. Survey participation was anonymous, and no demographic information was collected from participants. Results: Representatives from 11 organizations completed the survey (40%). Of those who responded, nine (82%) made changes as a result of the program, with eight (73%) making two or more changes such as purchasing portable air filters and increasing routine maintenance of HVAC systems. Conclusions: When presented with brief access to expert support and tailored plain language guidance, people working in community spaces increased their use of ventilation and filtration strategies for COVID-19 infection prevention and control. [ABSTRACT FROM AUTHOR]

The long-term use of air filters causes dust to accumulate on their surfaces or fill in the fibers of their internal filtering materials over time, thereby greatly reducing their effectiveness; therefore, the cleaning and replacement of air filter materials in public buildings are of great concern. The most commonly used non-woven fabric materials currently on the market are taken as the research object for this work, in which experiments are conducted on ultrasonic cleaning parameters, cleaning performance, regeneration effects, etc. The results showed that the best cleaning performance was achieved when the ultrasonic cleaning parameter was set to 120 W, and the cleaning time to 11.2 s, with a significant effect on particulate matter with a particle size of less than 2.5 μm. Under the premise of repeated dust containment, when PM10, PM2.5, and PM1.0 are cleaned nine, six, and seven times, respectively, the filtration performance for these particles can also recover to over 85% of the performance of the fresh filter material before cleaning; however, after ten ultrasonic cleanings, the filtration resistance decreased within the range of 4.6~20.7 Pa. In this study, we aim to effectively reduce the replacement of old filters and the generation of incineration pollution, thereby reducing carbon-dioxide-equivalent emissions and providing a reference value for achieving the efficient utilization of filter materials in public buildings under the dual carbon target. [ABSTRACT FROM AUTHOR]

[Display omitted] The persistent threat of viral epidemics poses significant risks to human health, highlighting the urgent need for antiviral surfaces to mitigate viral transmission through bioaerosols and surface contamination. However, there is still a scarcity of readily accessible antiviral coatings to address this critical concern. In this study, we demonstrate that photodynamic nanoparticle-embedded surfaces can swiftly inactivate both enveloped and non-enveloped viruses. We prepared core–shell structured methylene blue (MB)-loaded SiO 2 nanoparticles with a high reactive oxygen species (ROS) yield (0.47 ± 0.02). The superior ROS production was maintained after modifying these nanoparticles onto air filter fibers, likely due to the prevention of aggregation-caused quenching effects. Three viruses, including both enveloped and non-enveloped types, were rapidly inactivated within just 12 min (>6 log units) under medium light intensity (660 nm, 30 mW/cm2). Mechanistic studies revealed that envelope glycoproteins are the primary targets for this rapid inactivation. Thus, photodynamic nanoparticle-embedded surfaces offer a straightforward and adaptable strategy in the fight against viral epidemics. [ABSTRACT FROM AUTHOR]

The removal of benzene, toluene, ethylbenzene, and xylene (BTEX) from air was investigated in two similar biotrickling filters (BTFs) packed with polyurethane (PU) foam, differing in terms of inoculation procedure (BTF A was packed with pre-incubated PU discs, and BTF B was inoculated via the continuous recirculation of a liquid inoculum). The effects of white rot fungi enzyme extract addition and system responses to variable VOC loading, liquid trickling patterns, and pH were studied. Positive effects of both packing incubation and enzyme addition on biotrickling filtration performance were identified. BFF A exhibited a shorter start-up period (approximately 20 days) and lower pressure drop (75 ± 6 mm H2O) than BTF B (30 days; 86 ± 5 mm H2O), indicating the superior effects of packing incubation over inoculum circulation during the biotrickling filter start-up. The novel approach of using white rot fungi extracts resulted in fast system recovery and enhanced process performance after the BTF acidification episode. Average BTEX elimination capacities of 28.8 ± 0.4 g/(m3 h) and 23.1 ± 0.4 g/(m3 h) were reached for BTF A and BTF B, respectively. This study presents new strategies for controlling and improving the abatement of BTEX in biotrickling filters. [ABSTRACT FROM AUTHOR]

With the gradual increase in population density, population migration poses unprecedented challenges to urban environments and their capacity. The fresh air system effectively ensures fresh air in indoor environments. An important parameter affecting the selection of a fresh air filtration system is calculating particulate matter at a concentration of less than 2.5 μm (PM2.5). The PM2.5 concentration values of 31 cities in China from 2017 to 2020 were selected for analysis in this study. Based on mathematical induction and population density zoning, a new method that combines population density zoning is proposed, and the recommended constant K values for different regions are analyzed. The definition of K refers to the ratio of the outdoor design concentration value of PM2.5 to the annual average at different guarantee rates. The air filters for fresh air systems in five typical cities (Harbin, Beijing, Urumqi, Xi'an, Guangzhou) are also used as examples. The K values and selection differences under different recommendation methods are compared and analyzed. Under population migration and urbanization scenarios, the results indicate that the recommended K of the seven major regions method was optimal. Under these conditions, the recommended K values for five typical cities under strict and normal conditions differ from their average K values by 0.07 and 0.04, respectively. This method can accurately select fresh air filtration systems under different population densities; however, population density is related to factors such as policies and the economy and must be updated and revised regularly. On the whole, it provides reference values for the selection of PM2.5 design concentrations in fresh air systems under population distribution differentiation. [ABSTRACT FROM AUTHOR]

Moisture from ar is often responsible for biofouling and corrosion on the inner walls of the air filtration system and there by affecting the bacteria colony forming units (CFU Count). This phenomenon is more prevalent in humid environment. Applying electroless Nickel-Copper-Phosphorous (Ni-Cu-P) coating on mild steel helps to prevent bio fouling. An air filtration unit with inner walls coated with nano-TiO2 and inlet filter mesh made of Luffa and coated activated charcoal and zeolite is used in the experimentation process. The inner chamber is also radiated by band C of Ultraviolet sources (UVC) with 254 nm wavelength. A sudden spike in bacteria colony count has been observed as the air filtration unit remains in off mode for prolonged duration of time. The efficacy of the air filtration unit upon remaining in off- mode for a long time has been determined in the present work considering the bacterial colony count as response. Electroless Ni-Cu-P coating has been applied at selected locations previously affected by biofouling. A predictive model has been developed following response surface methodology using bacterial colony count as response and the composition of the electroless coating bath as the process parameters. Genetic algorithm was applied for the determination of the best possible constitution of chemical coating bath for the minimization of the bacterial colony count. Bacteria Colony formation was significantly affected by the sources of Nickel ion, Copper ion and the concentration of reducing agent in the electroless Ni-Cu-P coating bath. The confirmation run showed that the observed CFU count at the optimum condition converges with the data obtained from Genetic Algorithm. [ABSTRACT FROM AUTHOR]

Sand media filters are especially recommended to prevent emitter clogging with loaded irrigation waters, but their performances rely on backwashing. Despite backwashing being a basic procedure needed to restore the initial filtration capacity, there is a lack of information about the solid removal efficiency along the media bed depth. An experimental filter with a 200 mm silica sand bed height was used to assess the effect of two operation velocities (30/45 and 60/75 (filtration/backwashing) m h−1) and two clogging particles (inorganic sand dust and organic from a reclaimed effluent) on the efficiency of backwashing for removing the total suspended solids retained in different media bed slices. The average solid removal backwashing efficiency was greater with organic particles (78%) than with inorganic ones (64%), reaching its maximum at a 5–15 mm bed depth. A higher operation velocity increased the solid removal efficiency by 16%, using organic particles, but no significant differences were observed with inorganic particles. The removal efficiencies across the media bed were more uniform with organic particles (63–89%) than with inorganic (40–85%), which makes it not advisable to reduce the media height when reclaimed effluents are used. This study may contribute to future improvements in sand media filter design and management. [ABSTRACT FROM AUTHOR]

This research breaks new ground by proposing a unique solution to combat SARS-COV-2 aerosols: modifying a readily available window air conditioner's indoor blower to accommodate a HEPA (high-efficiency particulate air) filter. While traditional public health measures like lockdowns and mask-wearing remain crucial, this study explores an innovative engineering approach to air purification within homes and offices. The widespread impact of COVID-19 across various sectors—agriculture, manufacturing, finance, and more—necessitates exploring diverse solutions. Current efforts to utilize HEPA filters in HVAC systems face limitations. These filters, while highly effective at capturing airborne particles, increasingly impede airflow and require substantial pressure, posing challenges for standard HVAC systems to maintain efficient operation. This study addresses this critical gap by proposing a targeted modification to a specific window air conditioner (AC) model (GJC07AF-K3RNB9D) to incorporate an H-14 HEPA filter. Utilizing cutting-edge design tool (CF-TURBO) and advanced simulation software (STARCCM +), the research will provide a new blower specifically optimized for this application. This virtual testing will meticulously evaluate the modified system's performance, ensure optimal airflow, predict noise levels, and identify any potential design flaws before implementing the modification in a physical prototype. The success of this study could pave the way for the development of increasingly efficient and accessible HEPA-based air purification solutions for everyday use, particularly in areas with limited resources. Furthermore, this research can be a valuable foundation for future work aimed to increasingly improve indoor air quality (IAQ). [ABSTRACT FROM AUTHOR]

Reducing children's exposure to air pollution is a priority among California communities heavily impacted by air pollution exposures. We conducted an observational air quality study at a school to investigate the effectiveness of improved Heating, Ventilation, and Cooling (HVAC) system filters and portable air cleaners (PACs) in reducing children's exposure to fine particulate matter (PM2.5) under real-world classroom conditions. This study included five classrooms, three of which had PACs. Halfway through the study period, high-efficiency HVAC filters were installed in all five classrooms. Continuous measurements of outdoor and in-classroom PM2.5 concentrations were used to evaluate filtration effectiveness. The air filtration strategies, alone and in combination, demonstrated 14–56% reductions in indoor PM2.5 concentrations compared to outdoor levels. There were significant improvements in filtration resulting from HVAC filter upgrades in the two classrooms without PACs (11% and 22% improvement, p < 0.001). Upgrading HVAC filters in classrooms with PACs did not significantly improve filtration effectiveness, suggesting that utilizing both strategies simultaneously may not meaningfully improve air quality under these circumstances. CO2 data, as a proxy for ventilation, helped demonstrate that the observed filtration effectiveness was likely impacted by the variable HVAC system use and open doors. [ABSTRACT FROM AUTHOR]

Indoor air quality determines the comfort, health, and wellbeing of people in buildings. Windows are the optimal elements for providing natural ventilation and fresh air, but the outside contains suspended particles that can be harmful in high concentrations. This work presents an openable and double-glazed façade component with a cavity that includes a series of slats that filter the air and depurate it by means of a photocatalytic reaction (TiO2). This component integrates the functions of ventilation, solar protection, and air purification, which were analysed in the slat and the façade component to approve a preliminary design. To this end, it was applied to a specific case, a non-residential building at a latitude 41° N in a Mediterranean climate. The results show the optimal dimensions according to solar radiation and ventilation in this specific case and the method used to obtain them, along with the increase in the temperature of the incoming air with respect to the outside (10 °C). Finally, the results obtained from a photocatalytic coating sample show that the NOx degradation can be up to 9%. All these results confirm the applicability of this component in buildings and pave the way for further research. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Drainage & Irrigation Machinery Engineering / Paiguan Jixie Gongcheng Xuebao is the property of Editorial Department of Drainage & Irrigation Machinery Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The purpose of this study was to empirically evaluate the performance of fibrous materials that meet the criteria for inlet air filtration in internal combustion engines. The characteristics of filtration efficiency and accuracy, as well as the characteristics of flow resistance, were determined based on the mass of dust accumulated in the filter bed during the filtration process. Single-layer filter materials tested included cellulose, polyester, and glass microfiber. Multilayer filter media such as cellulose–polyester–nanofibers and cellulose–polyester were also examined. A new composite filter bed—consisting of polyester, glass microfiber, and cellulose—and its filtration characteristics were evaluated. Utilizing specific air filtration quality factors, it was demonstrated that the composite is characterized by high pre-filtration efficiency (99.98%), a short pre-filtration period (qs = 4.21%), high accuracy (dpmax = 1.5–3 µm) for the entire lifespan of the filter, and a 60–250% higher dust absorption coefficient compared to the other tested materials. A filtration composite bed constructed from a group of materials with different filtration parameters can be, due to its high filtration efficiency, accuracy, and dust absorption, an excellent filter material for engine intake air. The composite's filtration parameters will depend on the type of filter layers and their order relative to the aerosol flow. This paper presents a methodology for the selection and testing of various filter materials. [ABSTRACT FROM AUTHOR]

The exposure of workers to propylene glycol monomethyl ether acetate (PGMEA) in manufacturing environments can result in potential health risks. Therefore, systems for PGMEA removal are required for indoor air quality control. In this study, core–shell zeolite socony mobil-5 (ZSM-5)/polyvinylpyrrolidone–polyvinylidene fluoride nanofibers were directly electrospun and partially wet-etched on a mesh substrate to develop a cover-free compact PGMEA air filter. The electrospinning behaviors of the core–shell nanofibers were investigated to optimize the electrospinning time and humidity and to enable the manufacture of thin and light air-filter layers. The partial wet etching of the nanofibers was undertaken using different etching solvents and times to ensure the exposure of the active sites of ZSM-5. The performances of the ZSM-5/PVDF nanofiber air filters were assessed by measuring five consecutive PGMEA adsorption–desorption cycles at different desorption temperatures. The synthesized material remained stable upon repeated adsorption–desorption cycles and could be regenerated at a low desorption temperature (80 °C), demonstrating a consistent adsorption performance upon prolonged adsorption–desorption cycling and low energy consumption during regeneration. The results of this study provide new insights into the design of industrial air filters using functional ceramic/polymer nanofibers and the application of these filters. [ABSTRACT FROM AUTHOR]

The article discusses the results of a study on the impacts of wildfire smoke on health and indoor air quality. Topics mentioned include the analysis of dust for the presence of metals, metalloids, and polycyclic aromatic hydrocarbons, the levels of volatile organic compounds in affected and unaffected homes, and a description of modeling homes and materials experiment to simulate indoor air quality.

We fabricate a microelectromechanical systems (MEMS)-based device configuring the tunable air gap Fabry–Pérot filter (FPF) with a static gradient thickness filter on the same platform. The proposed double filter configuration offers a wavelength calibration approach that accurately estimates the air gap dimension in the tunable air gap FPF. The wavelength calibration is performed by utilizing the spectrally-selective and spatially-resolved transmission characteristics of the tunable air gap FPF and the static gradient thickness filter, respectively. The MEMS-compatible chip-level integration of the static gradient thickness filter facilitates device miniaturization to enable its use in handheld devices. [ABSTRACT FROM AUTHOR]

The industry usually faces a problem during the loading/unloading of finished products and raw materials from one place to another when both places are at different elevations. As trucks are of variable height and industry loading bays are at different elevations, it is not possible to drive the pallets effectively into freight, which results in decreasing loading/unloading efficiency of small concerns. In this paper, an adjustable height ramp system for increasing production efficiency and improving the industrial working environment was developed using a linear actuator and automation system for the safe loading and unloading of pallets. This adjustable ramp will help to increase the productivity of micro, small and medium enterprises (MSMEs), and it will provide a safe working environment. Using an adjustable ramp will help create a bridge between industry loading bays and freight, and it will also resolve the issue of different heights of both by making a path between them. The Internet of things (IoT)-enabled lifting and downward movement of the ramp is attempted for oil/air filter MSMEs. [ABSTRACT FROM AUTHOR]

Direct Analysis in Real Time Mass Spectrometry (DART-MS) is recently emerged as a promising approach for measuring semi-volatile organic compounds (SVOCs) in indoor surface films. However, its broader application in indoor environments is limited by low measurement repeatability and no separation of isomers. Herein we developed a sampling suite of indoor surface film for DART-MS analysis, optimized settings of DART to obtain higher analytical performance, and demonstrated the possibility of separating isomeric compounds using tandem mass spectrometry (MS/MS). Two pair of isomeric phthalate esters, including di(2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DnOP), diisobutyl phthalate (DiBP) and di-n-butyl phthalate (DnBP), were used as examples for method optimization and validation. Under optimized conditions, the instrument responses for all four compounds exhibited good linearity (r > 0.992) and acceptable repeatability (intraday RSD < 11.0%). The limits of quantification for the four PAEs ranged from 0.042 to 0.24 ng/cm2. The uncertainty in the separation of isomeric components using MS/MS was <11.4%, which is acceptable for real sample analysis. To further assess the developed method, we analyzed 10 film samples collected side by side in an occupied office. DnOP was not detected. The RSD among samples was 6.1% for DEHP, 4.6% for DnBP, and 10.4% for DiBP, indicating overall good repeatability of the collection and measurement method developed. With improved performance, the developed method increases the feasibility of the DART-MS technique for monitoring dynamics of chemical composition of indoor surface films. [ABSTRACT FROM AUTHOR]

Bacterial contamination is a hazard in many industries, including food, pharmaceuticals, and healthcare. The availability of a rapid and simple method for detecting this type of contamination in sterile areas enables immediate intervention to avoid or reduce detrimental effects. Among these methods, colorimetric indicators are becoming increasingly popular due to their affordability, ease of use, and quick visual interpretation of the signal. In this article, a bacterial contamination indicator system was designed by incorporating MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) into an electrospun PADAS matrix, which is a biodegradable poly(ester amide) synthesized from L-alanine, 1,12-dodecanediol, and sebacic acid. Uniaxial stress testing, thermogravimetric analysis and scanning electron microscopy were used to examine the mechanical properties, thermal stability, and morphology of the mats, respectively. The capacity for bacterial detection was not only analyzed with agar and broth assays but also by replicating important environmental conditions. Among the MTT concentrations tested in this study (0.2%, 2%, and 5%), it was found that only with a 2% MTT content the designed system produced a color response visible to the naked eye with optimal intensity, a sensitivity limit of 104 CFU/mL, and 86% cell viability, which showed the great potential for its use to detect bacterial contamination. In summary, by means of the process described in this work, it was possible to obtain a simple, low-cost and fast-response bacterial contamination indicator that can be used in mask filters, air filters, or protective clothing. [ABSTRACT FROM AUTHOR]

This paper presents an experimental study of the effect of the mass of dust retained on a fibrous filter bed operating singly and in a "cyclone-filter-bed" system on changes in filtration efficiency and accuracy, as well as the increase in flow resistance. The research was carried out using a novel and unprecedented method, determining the dust absorption coefficient km of the filter baffle under laboratory conditions. A filtration system built of a single cyclone and a cylindrical filter cartridge with an appropriately sized surface set behind it was studied. Conditions corresponding to the actual operating conditions of the air filter were maintained: dust concentration, filtration speed and dust extraction from the cyclone settling tank. The purpose of the research was to evaluate filter materials with different structures in terms of filtration efficiency and accuracy, as well as flow resistance. The study showed that the parameters of the structure of filter materials—permeability, grammage and thickness—affect the process of retaining dust particles. It was shown that the increase in the flow resistance of the filter bed has a higher intensity when dust grains of small sizes are directed at it, which is the case when the bed is operated behind a cyclone, which separates larger dust grains from the air. There is a reduction in the operating time of the filtration system due to the limitation of the permissible resistance ∆pfdop, and the corresponding dust absorption km has a lower value. For a fixed value of the flow resistance, the dust absorption coefficient km2 of three different filtration baffles AC, B2, and B, working with a cyclone, take values 50–100% smaller than when working in a single-stage system. It has been shown that the "cyclone-filter baffle" unit, due to its greater dust separation capability, allows the filter cartridge to operate for a longer time until a certain flow resistance is reached. This allows the unit to operate longer at lower flow resistance without changing the filter cartridge, thus saving energy. The km values obtained during the tests, using the proposed original method, allow the selection of the filter bed for specific vehicle operating conditions by modelling its course. [ABSTRACT FROM AUTHOR]

The production of solar panels is continuously increasing due to increasing demands at industrial and residential levels. This also leads to an increasing demand for solar simulator testing tools. A solar simulator is a tool to assess a solar panel's performance in lab and industry scales. One of the main components of the solar simulator is the Air Mass Filter (AMF). The primary function of AMF is to remove unwanted wave bands from the solar simulator light source (e.g., Xe arc lamp) so that the filtered spectrum is commensurate to that of solar irradiation. An AMF can be produced by fabricating a thin material layer on a transparent substrate like glass. The film would absorb certain wave bands in different ways. This paper reports the fabrication of the chalcogenide PbS thin films for applying AMF. The thermal evaporation technique is used for the film fabrication. PbS is known for its versatility for applications in different optical devices due to its tailorable optical properties. Different amounts (in grams) of PbS source powders are used to deposit the PbS thin films. The optical properties of the films are then examined using UV-Vis spectroscopy. The distributions of the transmittance intensity of the Xearc-lamp light with and without the use of the films as an optical filter are then examined using a solar simulator. From the experiments, the film deposited using a 0.012 g PbS powder source is regarded as the optimum one regarding the transmittance intensity distribution. [ABSTRACT FROM AUTHOR]

Under the goal of "achieving carbon peak by 2030 and carbon neutrality by 2060", how to select the type of fresh air system has become a key area of energy conservation. The method of outdoor design PM2.5 concentration is one of the important factors affecting the selection of fresh air filtration system. This paper first analyzed the PM2.5 concentration values of 31 cities in China from 2017 to 2020 based on mathematical induction, and next gave the recommended coefficient K under six urban economic regions methods in combination with the actual situation. Finally, the selection of air filters in five typical cities was taken as an example, the differences in recommended coefficient K and selection of outdoor design PM2.5 concentration under different recommended methods were compared and analyzed. The results showed that the recommended coefficient K under the six economic regions could meet the required K value needs of the region. The recommended coefficient K by the six economic regions methods based on per capita GDP is the best. Under that conditions, the recommended coefficient K of the five typical cities under strict and normal conditions differs from the average K values of the six methods by 0.06 and 0.04. This paper will provide a new method for the correct selection of outdoor design PM2.5 concentration in fresh air systems to achieve the dual carbon energy-saving goal. [ABSTRACT FROM AUTHOR]

Background/Aim. Available face masks, used to protect the respiratory system from various types of pathogens, show unsatisfactory efficiency because the size of viruses like severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is much smaller than the void spaces in these masks. Difficult breathing through some masks quickly tires out, which makes ordinary people avoid wearing them. These facts suggest that a new strategy is desirable for designing protective face masks. The aim of the study was to present new filters for face masks to protect people exposed to high concentrations of bacteria and viruses, particularly SARS-CoV-2. Methods. Filters for these masks were manufactured of dense cotton fabric impregnated with silver quantum dots. The filters were characterized by scanning electron microscopy and ioncoupled plasma mass spectrometry. Wettability properties were determined by measuring contact angles with water, and a color fastness test was performed. Antibacterial assay was performed using Staphylococcus (S.) aureus. Viability quantitative polymerase chain reaction (qPCR) for virus integrity assay and reverse transcription qPCR (RT-qPCR) assay were used for antiviral activity assessment. Results. In vitro assays showed extremely high efficiency of these filters in destroying S. aureus and SARS-CoV-2 virus. The filters also showed high safety and easy breathing possibilities. Conclusion. The high efficiency of these masks against SARS-CoV-2 has been demonstrated through numerous tests, and they have been approved as anti-SARS-CoV-2 masks for the first time in the world. In the meantime, this solution has been applied in practice, and the data obtained about that are very encouraging. [ABSTRACT FROM AUTHOR]

As air pollution escalates, the need for air filters increases. It is better that the filters used be based on natural fibers, such as non-wood fibers, which cause low damage to the environment. However, the short fiber lengths, low apparent densities, and high volumes of non-wood materials can make it challenging to prepare filter paper with the required mechanical and physical properties. In that context, this study focused on utilizing bamboo fibers to fabricate filter paper by employing the anthraquinone soda pulping method. The pulp underwent bleaching and oxidation processes, with the incorporation of cationic starch (CS) and polyvinyl alcohol (PVA) to enhance resistance properties, resulting in the creation of handmade filter papers. The findings revealed that the tear, burst, and tensile strength of filter paper increased with the oxidation and addition of CS and PVA. Air permeability increased with addition of PVA and combination of CS and PVA. FTIR demonstrated the conversion of hydroxyl groups in cellulose chains to carboxyl groups due to oxidation. SEM images illustrated alterations in the fiber structure post-oxidation treatment, with CS reducing pores while PVA and the CS-PVA combination enlarged pore size and enhanced porosity. The BET surface area surface area expanded with oxidation and the addition of the CS-PVA blend, indicating heightened filter paper porosity. Notably, the combined inclusion of CS and PVA not only augmented mechanical strength but also increased porosity while maintaining pore size. [ABSTRACT FROM AUTHOR]

Background: Asthma affects the quality of life (QoL) of millions of people worldwide. Effective control is paramount to a decline in prevalence and severity. To address this, we aimed to investigate the effectiveness of an asthma home management manual and low-cost air filter in improving resource-limited settings. Patients and Methods: This randomized controlled trial was conducted between March to July 2022. The participants were 18– 55 years old outpatient with asthmatic patients. A total of 114 participants were recruited and randomly assigned to three groups: home management only, home management and air filtering, and control. Validated measurement tools were applied, and the Wilcoxon test was used to evaluate changes in QoL. Results: Asthma burden was found in at least one-third of participants in each group. At baseline, there was no difference in mAQLQ scores among participants in all group allocations (p-value > 0.05), and the air filter group had an increase in the total mAQLQ score (p-value = 0.044) and post-intervention activity quality of life (p-value = 0.002). The environmental quality of life increased post-intervention (p-value = 0.004) and remained higher after four weeks of follow-up compared to baseline (p-value = 0.041) in the home management group participants. Conclusion: The findings indicate that the enforcement of a home management manual and the application of low-cost filters in air circulation systems offer advantages in improving the quality of life of patients with moderate and mild asthma. [ABSTRACT FROM AUTHOR]

Asthma, a prevalent chronic respiratory condition affecting millions of children globally, presents a significant health challenge. This review critically examines the developmental pathways of asthma in children, focusing on genetic, environmental, and early-life determinants. Specifically, we explore the impact of prenatal and postnatal factors such as maternal smoking, nutrition, respiratory infections, and allergen exposure on asthma development. Our analysis highlights the intricate interplay of these influences and their contribution to childhood asthma. Moreover, we emphasize targeted strategies and interventions to mitigate its burden, including genetic counseling for at-risk families, environmental modifications to reduce triggers, and early-life immunomodulation. By delving into these preventive measures and interventions, our review aims to provide actionable insights for healthcare professionals in developing tailored strategies to address the complexities of childhood asthma. In summary, this article offers a detailed examination of asthma development in children, aiming to enhance understanding and inform efforts to reduce its burden through targeted interventions. [ABSTRACT FROM AUTHOR]

Improving indoor air quality through the use of air purifiers has become a major focus, with emphasis on developing filters with high efficiency, high holding capacity, and low-pressure drop to improve the clean air delivery rate (CADR) for air purifiers. However, although most studies focused on developing media and evaluating their performance, few studies have reached the employment for a pleated filter. In this study, we newly synthesized flat media and pleated filters by combining polytetrafluoroethylene membrane (PT) and melt-blown (MB) materials (PM) and compared its initial performance to that of other air purifier filters (MB, glass fiber, and PT). Additionally, we analyzed how the performance changed after the particles were loaded. The initial efficiency of the PM filter showed a higher quality factor (QF) than the other filters. Furthermore, when more particles were loaded, the penetration of the PM did not change. These results demonstrate the potential of the PM. However, the CADR and submicron-sized (0.02–0.113 μm) CADR (sCADR) were highest for the MB filter due to the initial pressure drop. Therefore, additional improvements are required to apply the PM in air purifiers. However, the results suggest that the PM can be a new alternative for air purifier filters used in medical centers or facilities with vulnerable populations where a high-efficiency particle air (HEPA) filter must be used. [ABSTRACT FROM AUTHOR]

Nanofibers are investigated to be superiorly applicable in different purposes such as drug delivery systems, air filters, wound dressing, water filters, and tissue engineering. Herein, polyacrylonitrile (PAN) is thermally treated for autocatalytic cyclization, to give optically active PAN-nanopolymer, which is subsequently applicable for preparation of nanofibers through solution blow spinning. Whereas, solution blow spinning is identified as a process for production of nanofibers characterized with high porosity and large surface area from a minimum amounts of polymer solution. The as-prepared nanofibers were shown with excellent photoluminescence and microbicide performance. According to rheological properties, to obtain spinnable PAN-nanopolymer, PAN (12.5–15% wt/vol, honey like solution, 678–834 mPa s), thermal treatment for 2–4 h must be performed, whereas, time prolongation resulted in PAN-nanopolymer gelling or rubbering. Size distribution of PAN-nanopolymer (12.5% wt/vol) is estimated (68.8 ± 22.2 nm), to reflect its compatibility for the production of carbon nanofibers with size distribution of 300–400 nm. Spectral mapping data for the photoluminescent emission showed that, PAN-nanopolymer were exhibited with two intense peaks at 498 nm and 545 nm, to affirm their superiority for production of fluorescent nanofibers. The microbial reduction % was estimated for carbon nanofibers prepared from PAN-nanopolymer (12.5% wt/vol) to be 61.5%, 71.4% and 81.9%, against S. aureus, E. coli and C. albicans, respectively. So, the prepared florescent carbon nanofibers can be potentially applicable in anti-infective therapy. [ABSTRACT FROM AUTHOR]

Fungal spores that cause infectious fungal diseases in rice are mainly transmitted through air. The existing fixed, portable or vehicle-mounted fungal spore collection devices used for rice infectious diseases have several disadvantages, such as low efficiency, large volume, low precision and incomplete information. In this study, a mobile fungal spore collection device is designed, consisting of six filters called "Capture-A", which can collect spores and other airborne particles onto a filter located on a rotating disc of six filters that can be rotated to a position allowing for the capture of six individual samples. They are captured one at a time and designed and validated by capturing spores above the rice field, and the parameters of the key components of the collector are optimized through fluid simulation and verification experiments. The parameter combination of the "Capturer-A" in the best working state is as follows: sampling vessel filter screen with aperture size of 0.150 mm, bent air duct with inner diameter of 20 mm, negative pressure fan with 1500 Pa and spore sampling of cylindrical shape. In the field test, the self-developed "Capturer-A" was compared with the existing "YFBZ3" (mobile spore collection device made by Yunfei Co., Ltd., Zhengzhou, China). The two devices were experimented on at 15 sampling points in three diseased rice fields, and the samples were examined and counted under a microscope in the laboratory. It was found that the spores of rice blast disease and rice flax spot disease of rice were contained in the samples; the number of samples collected by a single sampling vessel of "Capturer-A" was about twice that of the device "YFBZ3"in the test. [ABSTRACT FROM AUTHOR]

Background Using a multiple-measurement approach, we examined the real-world effectiveness of portable HEPA air filtration devices (air cleaners) in a school setting. Methods We collected data over 7 weeks during winter 2022/2023 in 2 Swiss secondary school classes: environmental (CO2, particle concentrations), epidemiologic (absences related to respiratory infections), audio (coughing), and molecular (bioaerosol and saliva samples). Using a crossover design, we compared particle concentrations, coughing, and risk of infection with and without air cleaners. Results All 38 students participated (age, 13 – 15 years). With air cleaners, mean particle concentration decreased by 77% (95% credible interval, 63% − 86%). There were no differences in CO2 levels. Absences related to respiratory infections were 22 without air cleaners vs 13 with them. Bayesian modeling suggested a reduced risk of infection, with a posterior probability of 91% and a relative risk of 0.73 (95% credible interval, 0.44 – 1.18). Coughing also tended to be less frequent (posterior probability, 93%), indicating that fewer symptomatic students were in class. Molecular analysis detected mainly non–SARS-CoV-2 viruses in saliva (50/448 positive) but not in bioaerosols (2/105) or on the HEPA filters of the air cleaners (4/160). The molecular detection rate in saliva was similar with and without air cleaners. Spatiotemporal analysis of positive saliva samples identified several likely transmissions. Conclusions Air cleaners improved air quality and showed potential benefits in reducing respiratory infections. Airborne detection of non–SARS-CoV-2 viruses was rare, suggesting that these viruses may be more difficult to detect in the air. Future studies should examine the importance of close contact and long-range transmission and the cost-effectiveness of using air cleaners. [ABSTRACT FROM AUTHOR]

The development of high-performance filtration materials is essential for the effective removal of airborne particles, and metal–organic frameworks (MOFs) anchored to organic polymer matrices are considered to be one of the most promising porous adsorbents for air pollutants. Nowadays, most air filters are generally based on synthetic fiber polymers derived from petroleum residues and have limited functionality, so the use of MOFs in combination with nanofiber air filters has received a lot of attention. Here, a conjugated electrostatic spinning method is demonstrated for the one-step preparation of poly(lactic acid) (PLA) nanofibrous membranes with a bimodal diameter distribution and the anchoring of Zeolitic Imidazolate Framework-8 (ZIF-8) by the introduction of TiO2 and in situ generation to construct favorable multiscale fibers and rough structures. The prepared PLA/TZ maintained a good PM2.5 capture efficiency of 99.97%, a filtration efficiency of 96.43% for PM0.3, and a pressure drop of 96.0 Pa, with the highest quality factor being 0.08449 Pa−1. Additionally, ZIF-8 was uniformly generated on the surface of PLA and TiO2 nanofibers, obtaining a roughened structure and a larger specific surface area. An enhanced filtration retention effect and electrostatic interactions, as well as active free radicals, can be generated for the deep inactivation of bacteria. Compared with the unmodified membrane, PLA/TZ prepared antibacterial characteristics induced by photocatalysis and Zn2+ release, with excellent bactericidal effects against S. aureus and E. coli. Overall, this work may provide a promising approach for the development of efficient biomass-based filtration materials with antimicrobial properties. [ABSTRACT FROM AUTHOR]

Products used and produced in industrial locations must have natural ingredients and minimal energy usage due to air and environmental pollution. It is impossible for standard filters to clean bacterias in homes, workplaces and areas working with biological creatures. Therefore, the production of multifunctional nanocomposite and hybrid filter papers is necessary. In the study, filter papers coated with nanocomposite solutions prepared from green synthesized nanosilver (AgNPs) with plant extracts and Polyvinyl Alcohol (PVA). Scanning Electron Microscope (SEM) analyses showed that silver nanoparticles and PVA homogeneously coated the filter paper fibers, thereby reducing the average pore diameters by only 3% compared to commercial standards of filter paper. A filter with 36% higher burst pressure resistance was produced by nanosilver, plant extracts and PVA modification. The antibacterial effect is provided to the filters with a high effect of up to 10000 times, by coating them with nanosilver and plant extracts. This study made it possible to produce filter paper with natural ingredients and at low cost, reducing energy and raw material consumption, with high antibacterial effect and mechanical strength. In this way, bacteria and pollutants in the air will be cleaned without harming the environment and human health. [ABSTRACT FROM AUTHOR]

Autostrainer is used for the purpose of debris removal in order to increase the efficiency of the heat exchanger by taking the required raw water as a heat source for the pre-cooling hydrothermal system. During the operation of the autostrainer, a pressure drop occurs due to the blockage of the screen in the autostrainer. As a result, the resistance of the pipe network for the intake system is changed, and the operating efficiency point of the pump, valve, heat exchanger, etc., is altered. By calculating the system resistance taking into account the pressure drop caused by the blockage rate of the screen in the autostrainer, the optimum operating efficiency can be expected when the intake system such as a pump, valve or heat exchanger, etc. is constructed. In this study, Computational Fluid Dynamics (CFD) was used to construct a scenario in which screen blockage may occur, predicting pressure drop for the slot cross-section of the screen in the autostrainer to derive a resistance coefficient value. The resistance coefficient value was applied to the porous region corresponding to the screen in the autostrainer's 3D shape and compared with the experimental value for the pressure drop and headloss coefficient. By predicting the pressure drop for the autostrainer's screen blockage rate of 0% to 50%, the coefficient of headloss required for the design of the intake system was calculated. Additionally, in order to predict the debris removal rate, which is the original role of the autostrainer, the debris was assumed to be particles, and sedimentation rate was predicted according to the size and weight of the particles. Building on this, when introducing the autostrainer used in pre-cooling into the membrane filtration process, due to the pressure loss caused by the inflow of debris during the use of the autostrainer, this study aims to utilize Computational Fluid Dynamics (CFD) to derive the head loss coefficients according to the screen blockage rate, and use these coefficients to calculate the system's resistance curve. Additionally, in this study, the term "autostrainer" is used instead of the term "membrane strainer" to align with more popular terminology. [ABSTRACT FROM AUTHOR]

This paper follows a practical approach to evaluate particulate matter emissions from biomass-fuelled power plants and analysis measurement uncertainties. Sixty-seven measurement reports from 11 biomass power plants, all equipped with fabric filters as dust control device, were analysed. Particulate matter emission measurements by gravimetrical standard reference method were chosen to provide the most reliable values to investigate the influence of bag filter parameters, such as media age or bag filter length. 92.1% of total dust emission measurements were below lower BAT-associated emission levels (BAT-AELs) for waste incineration. Data also showed that bag filter media older than 6 years can still secure very low dust emission levels. This work also gives a summary of findings and problems with uncertainty of automated measuring systems for dust emissions in biomass combustion applications in practice and quality assurance level one (QAL1) process related to very low emission levels such as lower best available techniques reference document (BREF) values. Practical examples on issues of continuous dust emission monitoring devices are also given. [ABSTRACT FROM AUTHOR]

This review provides a concise overview of preventive measures against dust mite allergies in pediatric populations, emphasizing the need for a comprehensive and evolving approach. Dust mites, ubiquitous microscopic arachnids, pose a significant threat to children's health, triggering allergies and asthma. Traditional preventive strategies such as regular cleaning, mattress covers, and humidity control are essential but warrant refinement. Empowering children through personalized hygiene education and exploring innovative bedding solutions showcase a forward-thinking paradigm. Collaboration with healthcare professionals and embracing technology-driven solutions ensures a holistic and adaptable approach to safeguarding pediatric health against dust mite-related ailments. This abstract underscores the importance of continually reassessing and innovating preventive measures to create resilient and health-conscious living environments for children. [ABSTRACT FROM AUTHOR]