Search

By the term, lattice structures are intended topologically ordered open-celled structures consisting of one or more repeating unit cells. Technological development and especially the growth of the additive manufacturing (AM) industry allows innovative structural design, including complex lattice structure. Selective laser melting (SLM) is an AM process that enables the manufacture of space filling structures. This work investigated the influence of the most important process parameter settings on lattices printability, focusing on the geometrical accuracy, the quantity of powders adhered to the main frame (satellites) and their compression behaviour. The process parameters such as the laser power, scan speed and layer height affect vigorously the design, quality and mechanical properties of the part. The aim of the paper is to evaluate how different parameter combinations affect the cellular structures’ printing. Twenty-four lattice structures with cubic and rhombic dodecahedron unit cells made of stainless steel 17-4PH (AISI-630) were printed using different combinations of SLM process parameters. Each structure was analysed considering its geometrical, topological and mechanical properties. Finally, the best parameter combination was evaluated comparing results achieved. Although this work investigated the 17-4PH stainless steel, physical principles related to the printing process described are generally true for the SLM process. Therefore, the adopted approach could still be suitable also for all the other materials commonly used with this AM technology.

In this work, the effect of different mixing techniques on thermal and mechanical properties of graphene nanoplatelets (GNPs) and graphene nanofibers (GANFs) loaded epoxy nanocomposites was investigated. Three dispersion methods were employed: a high shear rate (HSR), ultrasonication (US) and the fluidized bed method (FBM). The optical microscopy has revealed that the most suitable dispersion, in terms of homogeneity and cluster size, is achieved by implementing the US and FBM techniques, leading to nanocomposites with the largest increase of glass transition temperature, as supported by the DMA analysis data. The fracture toughness results show a general increase of both the critical stress intensity factor (KIC) and the critical strain energy release rate (GIC), likely due to the homogeneity and the low scale dispersion of the carbonaceous nanostructures. Based on the nanocomposite fracture toughness improvements and also assuming a potential large scale up production of the nanocomposite matrix, a single mixing technique, namely the FBM, was employed to manufacture the carbon fiber reinforced composite (CFRC). This method has resulted in being less time-consuming and is potentially most suitable for the high volume industrial production. The CFRCs were characterized in terms of tensile, flexural and interlaminar fracture toughness properties and the results were analyzed and discussed.

The in-situ contour strategy during Laser-Powder Bed Fusion (L-PBF) process remains one of the most promising solutions to improve the poor surface quality of the parts. On the other hand, it is well established that contour step affects the formation of sub-surface defects. The aim of this work is to assess the entity of sub-surface defects during the Laser-Powder Bed Fusion of Inconel 718 samples for which different contour processing conditions are considered. Cubic samples with 10 mm side were produced through L-PBF using a Concept Laser Cusing M2 L-PBF machine. The samples were printed with fixed bulk laser parameters, adopting a layer thickness of 30 μm and a chessboard laser scanning strategy. The in-situ contour conditions were changed in terms of laser scanning speed and hatch zone border. Afterwards, the samples were analyzed in terms of surface roughness (Sa) and sub-surface density through confocal microscopy. The results revealed that the surface roughness was the most affected output as a function of the varied process parameters, including the sample position on the building platform, with values ranging from 13 to 32 μm. On the other hand, the sub-surface density was always higher than 99%.

International audience; Composite materials are widely used as main parts and structural components in different fields, especially for automotive and military applications. Although these materials supply different advantages comparing to the metals, their implementation in engineering applications is limited due to low electrical and thermal properties and low resistance to erosion. To enhance these above-mentioned properties, the metallization of composite materials by creating a thin metal film on their surface can be achieved. Among different coating deposition techniques, Cold Spray appears to be the most suitable one for the metallization of temperature-sensitive materials such as polymers and composites with a thermoplastic matrix. This process relies on kinetic energy for the formation of the coating rather than on thermal energy and consequent erosion and degradation of the polymer-based composite can be avoided. In the last years, a new method to produce composite materials, as known as Fused Filament Fabrication (FFF), has been developed for industrial applications. This technique consists of a 3D printing process that involves the thermal extrusion of thermoplastic polymer and fibers in the form of filaments from a heated mobile nozzle. The implementation of this new technique is leading to the manufacturing of customized composite materials for the cold spray application. In the presented experimental campaign, Onyx material is used as a substrate. This material is made of Nylon, a thermoplastic matrix, and chopped carbon fibers randomly dispersed in it. Aluminum powders were cold sprayed on the Onyx substrate with a low-pressure cold spray (LPCS) system. This study aims to investigate the possibility of the metalizing 3D-printed composite material by cold spray technology. For this purpose, optical and microscopical analyses are carried out. Based on the results, the feasibility of the process and the influence of the morphology of the substrate are discussed, and optimal spraying conditions are proposed.

Additive Manufacturing (AM), applied to metal industry, is a family of processes that allow complex shape components to be realized from raw materials in the form of powders. The compaction of the powders is achieved by local melting of bed. Electron Beam Melting (EBM) is an additive manufacturing process in which a focalized electron beam is the heat source that allows the powders to be compacted. By EBM it is possible to realize complex shape components; this feature is of particular interest in titanium industry where numerous efforts are done to develop near net shape processes. One of the limits of EBM based AM process is the difficulty to realize large dimension parts. Due to this limit the study of joining processes of different parts is of great interest. In the present work the microstructure evolution of sheets of TI6Al4V made by EBM and joined by Linear Friction Welding (LFW) is analyzed in details. The bulk microstructure of the specimen is fine lamellar; lamellae are enclosed in alpha colonies. Different types of porosities are observed. In the joint a Thermo Mechanical Affected Zone (TMAZ) and Weld Bead (WB) are evident. In TMAZ a partial recrystallization occurs and the parent microstructure is deformed. Complete recrystallization occurs in WB whose structure is martensitic.

Cemented carbides, also known as Widia, are hard metals produced by sintering process and widely used in mechanical machining. They show high cutting capacity and good wear resistance; consequently, they result to be excellent materials for manufacturing cutting tools and sandblast nozzles. In this work, the wear resistance of WC-Co carbides containing Eta-phase, a secondary phase present in the hard metals when a carbon content deficiency occurs, is analyzed. Different mixtures of carbide are prepared and sintered, with different weight percentages of carbon, in order to form Eta-phase and then analyze how the carbon content influences the wear resistance of the material. This characterization is carried out by abrasive wear tests. The test parameters are chosen considering the working conditions of sandblast nozzles. Additional information is gathered through microscopic observations and the evaluation of hardness and microhardness of the different mixtures. The analyses highlight that there is a limit of carbon content below which bad sintering occurs. Considering the mixtures without these sintering problems, they show a wear resistance depending on the size and distribution of the Eta-phase; moreover, the one with high carbon content deficiency shows the best performance.