Search

The oxidation functionality of Mn(IV) sites has been assessed by density functional theory (DFT) analysis of adsorption and activation energies of CO, H2 and O2 on a model Mn4O8 cluster. DFT calculations indicate that Mn(IV) atoms prompt an easy CO conversion to CO2 via a reaction path involving both catalyst and gas-phase oxygen species, while much greater energy barriers hinder H2 oxidation. Accordingly, a MnCeOx catalyst (Mnat/Ceat, 5) with large exposure of Mn(IV) sites shows a remarkable CO oxidation performance at T ≥ 293 K and no H2 oxidation activity below 393 K. Empiric kinetics disclose that the catalyst-oxygen abstraction step determines both CO and H2 oxidation rate, although different activation energies favor the preferential oxidation (PROX) pattern of the studied catalyst (353–423 K). Conversion-selectivity of 100%, high stability during 72 h reaction time and moderate inhibiting effects of water and CO2 feeding reveal the potential of MnO2 materials as efficient, low-cost and robust PROX catalysts.

The reactivity pattern of the MnO2 catalyst in the selective aerobic oxidation of benzyl alcohol is assessed by density functional theory (DFT) analysis of adsorption energies and activation barriers on a model Mn4O8 cluster. DFT calculations predict high reactivity of defective Mn(IV) sites ruling a surface redox mechanism, L-H type, involving gas-phase oxygen. Bare and promoted (i.e., CeOx and FeOx) MnOx materials with high surface exposure of Mn(IV) sites were synthesized to assess kinetic and mechanistic issues of the selective aerobic oxidation of benzyl alcohol on real catalysts (T, 333–363 K). According to DFT predictions, the experimental study shows: i) comparable activity of bare and promoted catalysts due to surface Mn(IV) sites; ii) the catalytic role of oxygen-atoms in the neighboring of active Mn(IV) sites; and iii) a 0th-order dependence on alcohol concentration, diagnostic of remarkable influence of adsorption phenomena on the reactivity pattern. Evidences of catalyst deactivation due to the over-oxidation of benzyl alcohol to benzoic acid, acting as poison of the active sites, are discussed.

Molecular dynamics simulations based on density functional theory were employed to investigate the fate of a hydrogen molecule shot with different kinetic energy toward a hydrogenated palladium cluster anchored on the vacant site of a defective graphene sheet. Hits resulting in H2 adsorption occur until the cluster is fully saturated. The influence of H content over Pd with respect to atomic hydrogen spillover onto graphene was investigated. Calculated energy barriers of ca. 1.6 eV for H-spillover suggest that the investigated Pd/graphene system is a good candidate for hydrogen storage.

Data here reported are connected with the research article “Benzyl Alcohol to Benzaldehyde Oxidation on MnO x Clusters: Unraveling Atomistic Features” Gueci et al. [1] . This work described and discussed structural and energetic results, calculated by Density Functional Theory (DFT). In order to get kinetic information, DFT results were refined by an original approach, which will be shortly described in the following article. The crossed analysis of experimental and computational energetic and kinetic data allowed to (i) reconstruct the complicated lattice that connects the primary and secondary mechanisms of the reaction and (ii) identify alternative process pathways capable of by-passing parasitic mechanisms, decreasing selectivity. On the other hand, the data here presented show what is the basic information necessary to obtain the modeling of a complex process of heterogeneous catalysis. Moreover, they can be used either to verify the validity of the discussion outlined in the original article Gueci et al. [1] or as a starting point to computationally explore alternative routes and the related kinetics of the same oxidation processes, in the aim to further optimize the corresponding experimental approach.

The catalytic oxidation of benzyl alcohol with O 2 is a promising option for the production of benzaldehyde, from both environmental and economical viewpoints. In particular, highly dispersed MnO x systems feature good activity and selectivity in a wide range of temperatures, although deactivation phenomena by over-oxidation and/or poisoning of active sites are generally recorded. On this account, a density functional theory study was performed on cluster-sized catalyst models, namely Mn 4 O 8 and over-oxygenated Mn 4 O 9 fragments, to predict the reactivity pattern of MnO x catalysts in the selective aerobic oxidation of benzyl alcohol. Several pathways concur to determine the whole reaction process and all of them were compared to unveil the atomistic details of the alcohol oxidation mechanism. Moreover, assuming that the consecutive formation of benzoic acid affects the activity-stability pattern of the MnO x based catalyst, also the benzaldehyde oxidation mechanism was computationally addressed. A systematic comparison of the benzyl alcohol and benzaldehyde oxidation mechanisms on the Mn 4 O 8 and Mn 4 O 9 fragments reveals some experimental strategies to test the reaction mechanisms and design alternative catalytic routes to decrease undesired parasitic reactions leading to catalyst deactivation. The matching structural, energetic and kinetic data are published in the Data in Brief journal [1].

Boron nitride nanotube (BNNT) as an innovative support for carbohydrate transformation processes was evaluated, using density functional theory. The α-d-glucopyranose adsorption on a Pd30 cluster, supported on BNNT, was used to check both the local activity of topologically different metallic sites and the effects of the proximity of the BNNT surface to the same metallic sites. Detailed geometrical and electronic analyses performed on Pd30/BNNT and α-d-glucopyranose/Pd30/BNNT systems were discussed. It was observed that the deposition of the Pd30 cluster onto the BNNT support gives rise to an electronic rearrangement, determining a charge transfer from the support to the adsorbed metal cluster. The charge transfer, as shown by the analysis of molecular electrostatic potential, seems to generate electron-rich and electron-poor zones in the Pd30 cluster. The α-d-glucopyranose species, regardless the interaction geometry experienced, acts as an electron donor and preferentially adsorbs close to the electron-poor metal/support interface.

The ethylene glycol, CH2OH-CH2OH, decomposition mechanism, occurring on a subnanometric palladium cluster shaped by 12 atoms, was investigated by means of density functional theory. Different reaction routes were identified leading to H2 and CO. The whole reaction network was analyzed, framing the results within the graph theory. The possible decomposition pathways were discussed and compared, allowing one to draw a whole picture of all the parallel, possibly competitive, routes that starting from CH2OH-CH2OH originate H2 and CO.

Nucleation of homo- (Ni, Pd, Re, Pt) and heterometallic (Ni–Pd, Re–Pt) clusters on monovacancy sites of a graphene sheet has been investigated by means of periodic density functional theory calculations. It is shown that a vacant site in graphene is an effective nucleation center for both the monometallic and bimetallic clusters, whose characteristics are described in terms of structural distortions, nucleation energetics, affinities between different metal atoms, metal–carbon interactions, and ease of diffusion of metal atoms on graphene.

Infrared spectra of 0.5 mol·L-1 uranium(VI) nitrate monoamide complexes in toluene have been recorded and compared with infrared spectra calculated by DFT. The investigated monoamides were N,N- dimethylformamide (DMF), N,N-dibutylformamide (DBF), and N,N- dicyclohexylformamide (DcHF). The validity of DFT calculations for describing uranium nitrate monoamide complexes has been confirmed as a fair agreement between experimental and calculated spectra was obtained. Furthermore, a topological analysis of the electron density has been carried out to characterize monoamide-uranium interactions. From this work, it appears that the increase of stability of uranylmonoamide complexes may be directly linked to the degree of polarization of the ligands in interaction with uranylnitrate. Among the investigated monoamides, the most stable complex is UO 2(NO3)2·2DcHF. This complex is characterized by a high positive charge delocalization in the outer part of the ligand molecule, which leads to a more concentrated positive charge close to the uranyl cation (UO22+), thus strengthening the electrostatic interaction between the metal and the ligand. © 2010 American Chemical Society.

The catalyst Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is studied by CO-temperature programmed reduction (CO-TPR), isothermal oxygen storage complete capacity (OSCC), X-ray absorption spectroscopy (XAS) at the Pt L(III) edge, and in situ X-ray diffraction (in situ XRD), with the aim of elucidating the role of supported metal in CO oxidation by ceria-based three-way catalysts (TWC). The redox behavior of Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is compared to that of bare ceria-zirconia. OSCC of redox-aged Pt/ceria-zirconia is twice that of bare ceria-zirconia, and the maximum of CO consumption occurs at a temperature about 300 K lower than redox-aged ceria-zirconia. XAS analysis allows one to evidence the formation of a platinum-cerium alloy in redox-aged samples and the stability of the metal particles toward oxidation and sintering during high-temperature treatments. Under CO flux at 773 K, bare ceria-zirconia shows a continuous drift of diffraction peaks toward smaller Bragg angles, due to a progressive increase of Ce(III) content. Under the same treatment, the structural rearrangement of Pt-supported ceria-zirconia starts after an induction time and takes place with an abrupt change of the lattice constant. The experimental evidence points to the role of supported Pt in modifying the redox properties of ceria-zirconia with respect to the bare support. It is proposed that the much faster bulk reduction observed by in situ XRD for redox-aged Pt/ceria-zirconia can be attributed to an easier release of reacted CO(2), producing a more effective turnover of reactants at the catalyst surface.

The structural evolution of two Pt/ceria–zirconia catalysts, characterized by different amounts of supported Pt, was monitored by in situ X-ray diffraction during the anaerobic oxidation of CO at different temperatures. In a first phase, oxygen coming from the surface layers of the ceria–zirconia mixed oxide is consumed and no structural variation of the support is observed. After this induction time, bulk reduction of Pt/ceria–zirconia takes place as a step-like process, while the CO2 production continues at a nearly constant rate. This behavior is totally different from that of the metal-free support in similar reaction conditions, that show a gradual bulk reduction. In repeated oxidation–reduction cycles, it was observed that the induction time in Pt/ceria–zirconia is a function of the thermal history, of the amount of supported Pt and of the structural evolution of the samples. r 2003 Elsevier Inc. All rights reserved.

This interdisciplinary work combines the use of shape- and size-defined Pd nanocrystals (cubes of 10 and 18 nm, and octahedra of 37 nm) with in situ techniques and DFT calculations to unravel the dynamic phenomena with respect to Pd reconstruction taking place during acetylene hydrogenation. Notably, it was found that the reacting Pd surface evolved at a different pace depending on the shape of the Pd nanocrystals, due to their specific propensity to form carbides under reaction conditions. Indeed, Pd cubes (Pd(100)) reacted with acetylene to form a PdC0.13 phase at a rate roughly 6-fold higher than that of octahedra (Pd(111)), resulting in nanocrystals with different degrees of carburization. DFT calculations revealed changes in the electronic and geometric properties of the Pd nanocrystals imposed by the progressive addition of carbon in its lattice.