Search

International audience; According to UNESCO Institute for Statistics (UIS) data (UIS fact sheet, 2019), less than 30% of researchers worldwide are women. Long-standing biases and gender stereotypes are discouraging girls and women away from science related fields. In particular, STEM (science, technology, engineering and mathematics) research is traditionally male dominated and women remain underrepresented. As UNESCO has highlighted, both science and gender equality are, however, essential to ensuring sustainable development. In order to change traditional mindsets, gender equality must be promoted, stereotypes defeated, and girls and women should be encouraged to pursue careers in STEM.Throughout history, the contributions of female researchers to scientific progress have been extremely important. Yet, whereas the extraordinarily talented Nobel laureate Marie Skłodowska-Curie is often mentioned as a role model, it is nowadays well established that countless women such as Lise Meitner have received less recognition and acknowledgement for their research findings than their male counterparts (so-called Matilda effect (Rossiter, 1993)).Also, women traditionally publish less than men according to the European Commission She Figures, the ratio of women to men among authors of scientific publications in the EU being on the average one to two (EU, 2018), and recent surveys are highlighting a further drop in academic submissions from female scientists since the start of the Covid-19 pandemic early 2020.Role models are definitely extremely important to show to younger generations the growing impact of female researchers to science. Therefore, continuing the spirit of the International Day of Women and Girls in Science, Frontiers in Materials is proud to offer this platform to promote the work of female scientists, across the breadth of materials science and engineering.This inaugural ‘Women in Science: Materials’ collection (Fig.1) aims to highlight the impact of women researchers working in materials science and engineering. It gathers a selection of original articles with the lead author and/or corresponding author being a woman.32 contributions (3 reviews, 1 brief research report and 28 original research articles) present advances in theory, experiment and methodology with applications to compelling problems, across almost all sections of the journal: Mechanics of materials (Bouquerel et al., Jeong et al., TerMaath et al., Zhu et al.); Smart materials (Duc et al.); Polymeric and composite materials (Badji et al., Berzin et al., Brunella et al., Hostettler et al., Martins and Gil, Mirbaha et al., Padhan et al., Quintana et al., Raj et al., Saffar et al.); Carbon-based materials (Kato et al., Moulefera et al., Xu et al., Zhang et al.); Structural materials (Bonoli et al., Boyer et al., Korat and Ducman, Manzi et al., Masi et al.); Colloidal materials and interfaces (Garcia-Hernando et al., Pucci et al.); Energy materials (Castro-Gutiérrez et al.); Ceramics and glass (Giosuè et al.); Environmental materials (Bassi et al.); Biomaterials (Criado-Gonzalez et al., Kebaili et al.);The Guest Editorial team hope that this collection of papers will be the foundation of an international network of women researchers working in materials science and engineering, and a starting point for future collaborations and discussions.

Since the arrival of lapped porcelain stoneware tiles on the market, several studies have been focused on the improvement of the technical characteristics of the surfaces of these products. Surface lapping induces aesthetical improvements, but can at the same time deteriorate the performance of porcelain stoneware tiles. To overcome this problem, it is possible to protect the lapped surface with commercial waterproofing materials. In this work, lapped commercial porcelain stoneware tiles with protective stain proofing agents (FILA PD15 and FILA 1239 Plus) were evaluated. The stain resistance and chemical resistance results were correlated to the morphological surface characteristics of the products with and without protection. A systematic study of the surface porosity of the tiles was carried out. Results showed that unprotected surface pores tend to fill with dirt that is hardly removable by ordinary maintenance. If the pores are protected, the dirt from foot traffic is deposited only superficially and can be removed.

The topic of sustainability of reinforced concrete structures is strictly related with their durability in aggressive environments. In particular, at equal environmental impact, the higher the durability of construction materials, the higher the sustainability. The present review deals with the possible strategies aimed at producing sustainable and durable reinforced concrete structures in different environments. It focuses on the design methodologies as well as the use of unconventional corrosion-resistant reinforcements, alternative binders to Portland cement, and innovative or traditional solutions for reinforced concrete protection and prevention against rebars corrosion such as corrosion inhibitors, coatings, self-healing techniques, and waterproofing aggregates. Analysis of the scientific literature highlights that there is no preferential way for the production of “green” concrete but that the sustainability of the building materials can only be achieved by implementing simultaneous multiple strategies aimed at reducing environmental impact and improving both durability and performances.

One-part or “just add water” alkali activated materials (AAMs) have attracted a lot of attention thanks to the use of solid alkaline activators that makes these materials more suitable to commercialization compared to conventional AAMs (two-part). This is mainly because large quantities of caustic solutions should be handled for producing conventional AAMs. So, one-part AAMs have a great potential for in-situ applications. However, heat curing (

The aim of this work is to evaluate the cleanability performances of lapped porcelain stoneware surfaces with and without protective treatments. The knowledge of the material cleanability is an important selection parameter in buying tiles. However, an objective basis for testing and assessing this property still is lacking. In this study, standardized and laboratory tests to evaluate the cleanability performance of lapped porcelain stoneware products have been carried out and compared. Cleanability tests were performed by applying two different soiling suspensions, optimized for tile surfaces and reproducing chemical and mechanical actions simulating the working conditions and traditional cleaning operations. Surface characteristics (microstructure, topography, roughness) were analyzed before and after cleanability tests. The results showed a good correlation between different behavior in terms of cleanability and the microscopic and topographic characteristics of lapped tile. Respect to international standardized tests specific for ceramic tiles, such as stains resistance test, the laboratory procedures to evaluate the surface cleanability are able to better show cleanability improvements of lapped tiles with protective treatments.

This research reports on the influence of particle size and distribution on the physical, mechanical and microstructural features of solid solutions (feldspathic materials) based inorganic polymer composites (IPCs). Both granite and pegmatite were ground to different degree of finess making four different granulometry with particles of 63, 80, 125 and 200 μm. The respective mixes receive 15 wt% of metakaolin and were activated with a well designed alkaline solution. Matrices obtained showed high compressive and flexural strengths in the range 101.2–131.3 MPa, and 29–35.5 MPa, respectively. It was observed that the optimum mechanical performance of these matrices can be achieved through a mix-design of different grades of granulometry. This was suggested by mechanism combining reactivity and particles packing. In fact, although it can be expected that the finess of the combination of the particles size under 63 μm might present the better reactivity, it is showing that the combination of fine, medium and coarse particles is efficient in achieving denser and tougher microstructure. Lower cumulative pore volume (17 mL g−1) of the composites based on pegmatite, value not far from that of natural stones, resulted in a higher impact resistance of 3.03 J. It was concluded that designing the feldspathic rock-based composites with high strengths appear as sustainable, low energy consumption and environmentally-friendly materials for the structural construction.

Bone grafts and bone-based materials are widely used in orthopedic surgery. However, the selection of the bone type to be used is more focused on the biological properties of bone sources than physico-chemical ones. Moreover, although biogenic sources are increasingly used for deposition of biomimetic nanostructured coatings, the influence of specific precursors used on coating&rsquo, s morphology and composition has not yet been explored. Therefore, in order to fill this gap, we provided a detailed characterization of the properties of the mineral phase of the most used bone sources for allografts, xenografts and coating deposition protocols, not currently available. To this aim, several bone apatite precursors are compared in terms of composition and morphology. Significant differences are assessed for the magnesium content between female and male human donors, and in terms of Ca/P ratio, magnesium content and carbonate substitution between human bone and different animal bone sources. Prospectively, based on these data, bone from different sources can be used to obtain bone grafts having slightly different properties, depending on the clinical need. Likewise, the suitability of coating-based biomimetic films for specific clinical musculoskeletal application may depend on the type of apatite precursor used, being differently able to tune surface morphology and nanostructuration, as shown in the proof of concepts of thin film manufacturing here presented.

Porcelain stoneware tiles are industrially processed by using high sintering temperatures and fast firing cycles that result in products characterized by an almost impervious surface layer surrounding a rather porous bulk material. Since mechanical properties are affected by porosity, the knowledge of the material stiffness is an important parameter to define the service behavior of tiles. In the present investigation, porcelain stoneware samples having different closed porosity were investigated in order to understand the influence of the porosity on the elastic constants of the materials. Based on the quantitative XRD phase composition, elastic constants have been calculated via Voigt-Reuss-Hill averaging, and the influence of porosity has been taken into account via power-law and exponential relations. It is shown that the effective elastic constants predicted by exponential and power-law relations are in agreement with experimental values. It may be concluded that for this class of materials, in the porosity range below 14–16%, both exponential and power-law relations are helpful tools to design tiles with controlled microstructure and tailored mechanical properties.

The response to thermal variations is the primary cause of marble deterioration in ancient and modern buildings. In this study, the thermal behavior of Carrara marble after consolidation by an innovative hydroxyapatite-based treatment was investigated in comparison with ammonium oxalate and ethyl silicate. Samples were subjected to heating-cooling cycles up to 80 °C. All the consolidating treatments were found to be fairly compatible, as in no case the residual strain after the thermal cycles was found to increase compared to the unweathered untreated marble. Anyway, the hydroxyapatite-treatment has the advantage of causing the highest increase in marble cohesion and the lowest residual strain, besides being more chromatically compatible and durable than the alternative commercial consolidants. Keywords: Hydroxyapatite, Calcium oxalate, Thermal expansion coefficient, Residual strain, Dilatometry

This work investigates the effects of the structure, the bulk chemical composition and amount of the aluminosilicate fines on the strength development, pore refinement, water permeability, moisture control capacity and the microstructure of inorganic polymer concretes (IPC). The amorphous fines, one from pumice and another from recycled glass, presented sponge-like microstructure with tortuous pore network that maintained the presence of fine capillary pores while semi-crystalline feldspar sludge, the third type of fine aggregates used for this study, showed more dense and compact microstructure that explain the higher strength enhancement. Both amorphous and semicrystalline fines contributed to decrease the porosity, improve the strength and microstructure. However, based on the moisture control capacity and the durability indicators, the fine aggregate derived from semicrystalline feldspar was found to be more appropriate and efficient for the development of IPC at short time scale of curing. Pumice fine aggregate was found to be effective only with a long term curing. (C) 2015 Elsevier Ltd. All rights reserved.

Geopolymers are hydrated aluminosilicates with excellent binding properties. Geopolymers appeal to the construction sector as a more sustainable alternative to traditional cements, but their exploitation is limited by a poor understanding of the linkage between chemical composition and macroscopic properties. Molecular simulations can help clarify this linkage, but existing models based on amorphous or crystalline aluminosilicate structures provide only a partial explanation of experimental data on the nanoscale. This paper presents a new model for the molecular structure of geopolymers, in particular for nanoscale interfacial zones between crystalline and amorphous nanodomains, which are crucial for the overall mechanical properties of the material. For a range of Si–Al molar ratios and water contents, the proposed structures are analyzed in terms of skeletal density, ring structure, pore structure, bond-angle distribution, bond length distribution, X-ray diffraction, X-ray pair distribution function, elastic moduli, and large-strain mechanics. Results are compared with experimental data and with other simulation results for amorphous and crystalline molecular models, showing that the newly proposed structures better capture important structural features with an impact on mechanical properties. This offers a new starting point for the multiscale modeling of geopolymers.

This review presents “a state of the art” report on sustainability in construction materials. The authors propose different solutions to make the concrete industry more environmentally friendly in order to reduce greenhouse gases emissions and consumption of non-renewable resources. Part 1—the present paper—focuses on the use of binders alternative to Portland cement, including sulfoaluminate cements, alkali-activated materials, and geopolymers. Part 2 will be dedicated to traditional Portland-free binders and waste management and recycling in mortar and concrete production.