Search

In this study, kola-nut testa samples were modified with 0.1 M acetic acid and 0.1 M EDTA at room temperature. The modified Kola-nut testa samples were then characterized with respect to their pH at point of zero charge, melting point, specific gravity, Fourier-transform infrared (FTIR) spectra, and solubility. The characterization results of the modified Kola-nut testa (MKT) revealed that it was sparingly soluble in water, ethanol, and acetone but insoluble in n-hexane. The MKT had a specific gravity of 0.992 ± 0.020 and exhibited various pH values of 4.50 ± 0.50 and 12.00 ± 0.50 at the point of zero charges. The FTIR spectra of the MKT indicated the presence of –OH and –NH groups at 3310.97 cm−1, alkyl groups at 2928.53 cm−1, and aromatic rings at 1612.27–1529.81 cm−1. The results of the adsorption studies at various time intervals indicated that MKT had the capacity to adsorb Fe2+, Mg2+, Zn2+, Cu2+, and Pb2+ as follows: 1.90 ± 0.30 mg/g, 1.80 ± 0.20 mg/g, 1.40 ± 0.20 mg/g, 0.10 ± 0.01 mg/g, and 0.05 ± 0.01 mg/g, respectively. Thus, Fe2+, Mg2+, and Zn2+ were quantitatively removed from the aqueous solutions, whereas Cu2+ and Pb2+ were not. The adsorption of Fe2+, Mg2+, Zn2+, Cu2+, and Pb2+ by MKT from the aqueous medium was dependent on certain factors such as pH, temperature, adsorbent dosage, contact time, and initial metal-ion concentration.

The chemical properties of limestone have been the subject of several studies in recent years, highlighting its importance in various industrial applications. The present study focuses on six limestone samples from three geographical regions in Nigeria (Ashaka, Mfamosing, and Nkalagu). The analyses of their chemical composition using the Loss on Ignition Test and X-Ray Fluorescence Spectrometry was successfully carried out. Results of the study show that CaO is the main component, comprising between 60.054 % and 78.632 % of the samples. Values of Loss of Ignition (LOI) ranged from 30.820 % to 33.280 % while SiO2 composition ranged between 5.095 % to 12.238 %. Other oxides detected, include Al2O3 and Fe2O3, which make up less than 1 % of the composition. Obtained values were compared to Limestone standards for various industries and findings indicate that the Ashaka, Mfamosing, and Nkalagu limestone samples are of high purity and suitable for use in various industrial fields, including the steel industry, manufacture of bleaching powder, manufacture of calcium carbide, sugar industry, textile manufacture, cement industry, agricultural practice (soil liming), and flue gas desulphurization. Thus limestone deposits from Ashaka, Mfamosing, and Nkalagu has more potential and application uses beyond cement production which they are currently used for. [ABSTRACT FROM AUTHOR]

The extraction of "quercetin-rich" red onion skin (red onion skin extract [ROSE]) using acetone and chemical modification with aromatic diazonium salts of aniline (AmROSE), 2-aminophenol (APmROSE), and 2-aminobenzoic acid (ABmROSE) were carried out in this study. The effects of the particle diameter of red onion skin (ROS), volume of the solvent, and percentage of acetone in the solvent mixture on the extraction yield were investigated. The solubility, color, melting point, and functional groups present in ROSE before and after modification were also analyzed. The extraction of ROS using an aqueous solvent of 50% acetone gave the highest percentage extraction yield. In addition to the C=O, OH, C-O-C, and C-O-H functional groups that were present in both unmodified ROSE (UROSE) and modified ROSE, Infrared spectra results revealed that all the modifications (AmROSE, APmROSE, and ABmROSE) showed the presence of N=N and C-N of aromatic azo compounds at 1512-1496 and 1288-1256 cm-1, respectively. The three modifications were also found to be more soluble than UROSE in all the solvents. The melting point of UROSE and its modifications was within the range of 78 °C-105 °C, which was lower than that of commercial quercetin dehydrate P-Q (300 °C-310 °C). [ABSTRACT FROM AUTHOR]