Search

Your search keyword '"Dalverny, O."' showing total 13 results
Start Over Author "Dalverny, O." Search Limiters Full Text
13 results on '"Dalverny, O."'

4. Probabilistic approaches and reliability design of power modules

Author

Micol A., Martin C., Dalverny O., Mermet-Guyennet M., and Karama M.

Subjects
reliability, form, response surface, igbt, sn/ag solder., Industrial engineering. Management engineering, T55.4-60.8, Industrial directories, T11.95-12.5
Abstract

The weak point for the standard power IGBT modules in terms of reliability is thermal fatigue in solder joints due to the thermal stress induced by constitutive materials with different coefficients of thermal expansion (CTE). So far, many researches are aimed at defining accurate finite element simulation with constitutive equations of materials behaviour and fatigue failure relation connecting the inelastic strain and the number of cycles before failure. Even if these relations can be clearly identified, we can see that the validation of the finite element model is difficult due to the scatter of input data. In fact, the fatigue life of solder joints strongly depends on geometric shape, solders behaviour (due to the process) and applied load. The aim of this paper is to estimate the probability of failure of power module with the structural reliability methods. Thus the geometric, materials and loading variables are considered as random variables and the failure mode is modelled with the called limit state function. The two methods, response surface method and neural network method, are used here to evaluate the reliability of the lead-free solder. The sensitivities of the mean and the standard deviation for each random variable have been evaluated.

Published
2008
Full Text
View/download PDF

5. Reliability of the connections used in IGBT modules, in aeronautical environment

Author

Zéanh A., Dalverny O., Karama M., Woirgard E., Azzopardi S., Bouzourene A., Casutt J., and Mermet-Guyennet M.

Subjects
power electronic packaging, constitutive laws, failures criteria, fem, doe., Industrial engineering. Management engineering, T55.4-60.8, Industrial directories, T11.95-12.5
Abstract

In this paper, two IGBT modules assembling technologies with double side cooling capabilities and high level of integration were proposed for aeronautic applications after a state of the art and failures analysis. These technologies are compared using design of experiment based on non-linear finite element analysis with various materials, with respect to their potential failures under thermal and power loading profiles. The configurations optimizing the lifetime and reliability level were pointed out by loading profile and failure mode. Recommendations were then done in order to choose the optimal configuration of assembly for each application. Finally, these design rules were followed by the study of parts dimensions effects on the design outputs in order to help dimensioning the IGBT modules.

Published
2008
Full Text
View/download PDF

8. Error assessment in Image Stereo-correlation

Author

Mistou S., Fazzini M., and Dalverny O.

Subjects
Physics, QC1-999
Abstract

The aim of this work is to estimate errors related to Stereo-correlation technique applied to measurements of displacements. In a first step, the influence of the cameras positions is tested using a standard object. In a second step, an evaluation of the stereo-correlation system is achieved. It is based on the generation of synthetic images representative of real speckle patterns deformed. With these images, various parameters are treated in order to determine their impact on the measurement error.

Published
2010
Full Text
View/download PDF

9. Non destructive investigation of defects in composite structures by three infrared thermographic techniques

Author

Péronnet, E., Pastor, Marie-Laetitia, Huillery, R., Dalverny, O., Mistou, S., Welleman, H., Ecole nationale supérieure des Mines d'Albi-Carmaux - IMT Mines Albi (FRANCE), Institut National Polytechnique de Toulouse - INPT (FRANCE), Institut National des Sciences Appliquées de Toulouse - INSA (FRANCE), Institut Supérieur de l'Aéronautique et de l'Espace - ISAE-SUPAERO (FRANCE), Université Toulouse III - Paul Sabatier - UT3 (FRANCE), Nimitech Etudes (FRANCE), THERMOCONCEPT (FRANCE), Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE), Laboratoire Génie de Production (LGP), Ecole Nationale d'Ingénieurs de Tarbes (ENIT), Institut National Polytechnique (Toulouse) (Toulouse INP), Université de Toulouse (UT)-Université de Toulouse (UT)-Institut National Polytechnique (Toulouse) (Toulouse INP), Université de Toulouse (UT)-Université de Toulouse (UT), Institut Clément Ader (ICA), Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO)-Institut National des Sciences Appliquées - Toulouse (INSA Toulouse), Institut National des Sciences Appliquées (INSA)-Université de Toulouse (UT)-Institut National des Sciences Appliquées (INSA)-Université de Toulouse (UT)-Université Toulouse III - Paul Sabatier (UT3), Université de Toulouse (UT)-Centre National de la Recherche Scientifique (CNRS)-IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi), Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT), Thermoconcept, Nimitech études, Institut National des Sciences Appliquées (INSA)-Université Fédérale Toulouse Midi-Pyrénées-Institut National des Sciences Appliquées (INSA)-Université Fédérale Toulouse Midi-Pyrénées-Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Centre National de la Recherche Scientifique (CNRS)-IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi), Institut National des Sciences Appliquées - Toulouse (INSA Toulouse), Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Université Fédérale Toulouse Midi-Pyrénées-IMT École nationale supérieure des Mines d'Albi-Carmaux (IMT Mines Albi), and Institut Mines-Télécom [Paris] (IMT)-Institut Mines-Télécom [Paris] (IMT)-Institut Supérieur de l'Aéronautique et de l'Espace (ISAE-SUPAERO)

Subjects
Non destructive testing, Non contact technique, Sandwich and monolithic composite structures, [SPI.MECA.MEMA]Engineering Sciences [physics]/Mechanics [physics.med-ph]/Mechanics of materials [physics.class-ph], Infrared thermography, Full-field measurements, Mécanique des matériaux, [PHYS.MECA.MSMECA]Physics [physics]/Mechanics [physics]/Materials and structures in mechanics [physics.class-ph], ComputingMilieux_MISCELLANEOUS
Abstract

International audience; This paper investigates full-field measurement techniques based on Infrared Thermography for Non Destructive Testing (NDT) applications on composite materials. Three methods have been implemented and the paper intends to characterize and compare their defect detection limit and related specific application fields. Various composites have been considered in this study, namely laminates and sandwich structures, in order to address many important issues of performance assessment for the aviation industry.

Published
2012

10. Mechanical characterization of an Au-Ge solder alloy for high temperature electronic devices

Author

Msolli, S., Dalverny, O., joel alexis, Karama, M., Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE), and Institut National Polytechnique de Toulouse - INPT (FRANCE)

Subjects
Packaging for electronic devices, Au-Ge alloy, Brazing, Mécanique des matériaux
Abstract

This paper presents a description of the mechanical behaviour of an Au-Ge solder under various loading conditions as well as an elastoviscoplastic modelling. In order to achieve the modelling task, the solder is subjected to a set of shear, creep and fatigue loadings in order to determine the behaviour dependence to the temperature and displacement rate and which could be useful to evaluate the degradation of the material. These tests are realized under a wide range of temperatures, loads and displacement rates for modelling purposes. Then, a unified viscoplastic model is applied to predict correctly the material mechanical responses. The model is correlated with the experimental data.

Published
2010

Catalog

Books, media, physical & digital resources
See catalog results