Search

Dielectric sensing based on capacitive measurement technology is a favourable measurement approach in many industries and fields of application. From an electrical point of view, a coupling capacitance must be measured in the presence of stray capacitances. Different receiver circuit structures have been proposed for the underlying displacement current measurement. Ideally, the sensor assembly is directly connected to the sensor circuitry to minimize the influence with respect to these parasitic capacitances. However, under harsh operating conditions, e.g., at high temperatures, the sensor and the receiver circuit must be separated in order to protect the electronics. Consequently, the receiver circuit and the sensor have to be connected by cables, e.g., coaxial cables. The measurement setup differs significantly from the ideal design with a direct connection. In this paper, we investigate the behaviour of three common measurement circuits for capacitive measurements in instrumentations with cables. We study the interaction between the sensor and the electronics and analyse the operating behaviour of the circuit, as well as the operating states of the amplifiers used. We also address cross-sensitivities in the sensor design due to stray capacitances. The analyses are carried out for different cable lengths and measuring frequencies, and conditions for the usability of the circuit are deduced. In addition to the operational behaviour, we also evaluate the circuits by means of a noise analyses. Based on this analysis, we show a direct comparison of the circuits. The analysis is based on simulation studies, as well as collaborative measurements on test circuits where all circuit parameters are provided. The test circuits are realized with dedicated state-of-the-art circuit elements and, together with the analysis approach and the results, thus provide a basis for future developments. [ABSTRACT FROM AUTHOR]

Knowledge about the dielectric properties of materials, i.e., the relative permittivity and the conductivity, is important for various sensing applications and engineering. In pneumatic conveying systems, the dielectric properties of the transported good are affected by the transport gas, which aerates the pulverized material, effectively decreasing the permittivity. Traditional probe designs such as the open-ended coaxial probe are well suited for the dielectric characteristics of liquids, gels, and pulverized materials. However, to measure the dielectric properties for aerated materials, the probe has to provide measures to create an aerated state. In this paper, we present a probe design to measure the dielectric properties of aerated pulverized materials. The probe maintains a coaxial design with a dedicated gas injection, enabling the analysis of diluted materials. We discuss the design of the probe, show the modeling of the probe, and present suitable calibration techniques. Furthermore, we analyze the uncertainty of the probe design by means of a statistical analysis of the calibration approach. [ABSTRACT FROM AUTHOR]

Atmospheric ice accretion is considered a severe safety issue for technical systems such as communication infrastructure, power lines, blades of wind turbines, and so on in cold climate regions. Among different sensing systems to detect and provide reliable information about the state of ice, capacitive sensing has been reported as a suitable technique. In capacitive sensing, measured capacitances are influenced due to ice accretion. Signal processing for ice sensors requires to estimate parameters for the state of ice from the data. In this paper, we present a model-based estimation approach for capacitive ice sensors. We analyze different electrode topologies for ice sensing and provide a statistical analysis of the sensor behavior. We hereby consider the random nature of natural ice accretion. From simulations, we show how a statistical model for the measurement process can be derived and demonstrate the construction of estimation algorithms within the Bayesian framework. We will demonstrate the capability of our approach for automated ice detection by means of long-term field data showing the ability to estimate ice layers with a precision better than 1 mm. [ABSTRACT FROM AUTHOR]