Search

Rural people living around forests in Ethiopia depend on income from forest product collection as one of their livelihood activities. The forests of Sheka are threatened by unsustainable use and conversion to alternative land uses. This study was conducted to identify and quantify income from major forest products collected from the Sheka forest and examine factors that determine income from forest product collection. Quantitative and qualitative data were collected from primary and secondary sources. By stratified random sampling method, three kebeles were selected from the Masha district and 156 households were randomly selected from those kebeles and interviewed with a structured questionnaire. Descriptive and inferential statistics were determined by SPSS and STATA software. Multiple linear regression models were employed to determine the relationship between socio-economic factors and forest income. The result indicates 17 major forest product were collected and contributes an average of $1553.75 or 41.17% of their total annual income and was the highest contributor to total income. Forest income varies with agro-ecology and distance from the nearby markets in the study area. Households in the study area utilize more forest products for home consumption. Incomes from forest product collection are significantly related to the level of education of the household head, family size, and distance of home from the forest and market. Households in the study area depend to a higher degree on income from forest product collection and have an implication of sustainable management of forests in the long term. Int. J. Agril. Res. Innov. Tech. 12(2): 46-52, December 2022

Keruing gunung ( Dipterocarpus retusus ) is a non-timber forest product (NTFP) as a fruit producer that can be used as raw material for vegetable fats. One of the problems faced in planting programs for both production and conservation forests is the presence of fruit pests. The purpose of this study was to determine the fruit pests infestation fruits of D . retusus and the effect of altitude on fruit size and weight in Batulanteh Sumbawa. Fruit samples were collected at locations with different heights, namely below 1000 masl ( T 22oC, RH 83%) and above 1000 masl ( T 20oC, RH 88%). The samples of invading pests were observed and measured morphometry and morphology. The results showed that the insect infestation on the fruit was Alcidodes crassus . The percentage of fruit severity level reached more than 50% at each location. Elevation has a significant effect on fruit diameter and fruit weight, both infested by pests and whole fruit.

Dipterocarpaceae is known as a very important tree family both biologically and economically. Its distribution around the world covers the areas of Peninsular Malaysia, the Philippines, Sumatra, Kalimantan, Java, Sulawesi, Maluku to Papua. Dipterocarpaceae family has a high economic value, such as producing wood, balsam, resin, charcoal, fat, fruit, bark, essential oil, and camphor. Its products have very important roles for domestic use and export needs. As representatives of Dipterocarpaceae, the economic value of Shorea Roxb. ex Gaertner f, Dipterocarpus Gaertner f, and Dryobalanops Gaertner f will be discussed. Considering the very important role of Dipterocarpaceae, both biologically and economically, it is necessary to handle it sustainably, through the following actions such as conservation of genetic resources, seed physiology, seed handling, seedling ecology, root symbiosis and nutrition, pest and disease, management of natural forest, and plantation, and also non-timber forest product from Dipterocarpaceae. Dipterocarpaceae dikenal sebagai famili pohon yang sangat penting baik secara biologis maupun ekonomis. Penyebarannya di seluruh dunia meliputi wilayah Semenanjung Malaysia, Filipina, Sumatera, Kalimantan, Jawa, Sulawesi, Maluku hingga Papua. Famili Dipterocarpaceae memiliki nilai ekonomi yang tinggi, seperti menghasilkan kayu, balsam, damar, arang, lemak, buah, kulit kayu, minyak atsiri, dan kapur barus. Produk-produknya memiliki peran yang sangat penting untuk kebutuhan domestik dan ekspor. Sebagai perwakilan Dipterocarpace, nilai ekonomi Shorea Roxb. ex Gaertner f, Dipterocarpus Gaertner f, dan Dryobalanops Gaertner f akan dibahas. Mengingat peranan Dipterocarpaceae yang sangat penting, baik secara biologis maupun ekonomis, maka perlu dilakukan penanganan secara berkelanjutan, melalui tindakan-tindakan seperti konservasi sumber daya genetik, fisiologi benih, penanganan benih, ekologi semai, simbiosis dan nutrisi akar, hama dan penyakit, pengelolaan hutan alam, dan perkebunan, serta hasil hutan bukan kayu dari Dipterocarpaceae.

Aims: Megaphrynium macrostachyum is a key non-wood forest product (NWFP) in Central Africa. This study aims to describe the soil characteristics and behaviour of the species Megaphrynium macrostachyum in a fallow land in southeastern Gabon. Methodology: Leaf growth was monitored weekly on a sample of 60 leaves for 10 weeks, after the unrolling of horns. Population structure and leaf production were quantified on 64 m² plots and then extrapolated to the hectare. Soil samples were collected at 30 cm depth. Results: Leaf growth and stem enlargement were observed to take place during the horn stage, while stem elongation became active after this stage. The stem reached its maximum height about 60 days after the leaf had fully unrolled. Within the same population, leaf length and leaf width were less heterogeneous (on average 55.6 ± 5.9 cm and 35.5 ± 4.5 cm, respectively); whereas leaf area, stem diameter and stem height were quite heterogeneous (on average 1475 ± 328.3 cm², 9 ± 2.2 mm and 154 ± 33.3 cm, respectively). Megaphrynium macrostachyum was observed to colonise its environment quite well (148,646 ± 66,623 stems per hectare), thus explaining its high leaf production (104,167 ± 45,271 usable leaves per hectare). The soil sample analysed revealed Megaphrynium macrostachyum to grow in sandy-silty or sandy-silty-clay soils (58.21% sand, 25.69% silt and 16.1% clay), and in soils that are wet (35% relative humidity), acidic (pH 4.01), low in phosphorus (9.38 ppm assimilable phosphorus) and total nitrogen (0.01% total nitrogen), and high in organic matter (19.3% organic matter). Conclusion: The leaf area exploited by local populations is variable. Megaphrynium macrostachyum is less demanding on soil characteristics, with high leaf production. From a cultivation perspective, the horn stage would be decisive.

This research aims to determine the causes of land-use conflicts and formulate a participatory conflict resolution model of the Forest Management Unit (KPH) of Kulawi. Through interviews with respondents using the purposive sampling method. The study included the community around the forest area, local government, KPH, Department of Agriculture, BPDAS-HL, and local government. Data analysis was stakeholder's and land use conflict by using problem trees analysis. The study results show that the battle occurred not only because of the community's factor of accessing the area illegally but also because the KPH has not performed its function correctly. Some factors cause enforcement's failure, such as lack of understanding of the area and community empowerment. Some alternative solutions desired by the community: (1) The government through related agencies should supervise forest areas, (2) Clear boundaries between community-owned land, villages, and forest areas, (3) Community empowerment by utilizing potential forest product resources and (4) Granting management rights to community's forest claimed by the community. There are two models of conflict resolution to be offered. First, the KPH needs the collaboration of parties to resolve land-use conflicts. Second, community involvement as the main subject is significant in every stage of conflict resolution. The KPH supports improving community capacity related to competence in conflict resolution is indispensable.

Agroforestry has potential for strengthening the climate change resilience of smallholder farmers in Southeast Asia. In Indonesia, the food security challenges faced by smallholders will likely worsen due to climate change impacts. Agroforestry provides and option for strengthening climate change resilience, while contributing to food access, income, health, and environmental stability. To evaluate the evidence for such benefits, this systematic review identifies 22 peer-reviewed articles published between 2000 and 2019 which assess agroforestry’s contributions to food security in Indonesia, mostly in Java or Sumatra. Analysis of the studies indicate that traditional and commercial agroforestry contribute to food security in diverse ways: for example, traditional homegardens offer 20% more dietary diversity than commercial counterparts, while commercial homegardens may contribute up to five times more income. Agri-silviculture contributions fall along a timber versus non-timber forest product continuum that displays a similar tradeoff between diversity and income. Those systems with a commercial focus may receive 54% of their income from a single commodity crop such as coffee, while traditional systems allow greater access to plants with medicinal benefits. Nearly all agroforestry systems offered indirect benefits for food security, such as allowing more off-farm work than traditional agriculture and contributing to environmental stability: users of agroforestry were found by one study to collect 83% less fuelwood from natural forests. One study highlighted that agroforestry options have up to 98% greater net present value (for periods over 30 years) compared to slash and burn style agriculture. However, very few studies of Indonesian agroforestry focused explicitly on financial analysis and food security, indicating the need for further research. Given the similar situations faced by many Southeast Asia countries, our findings contribute to emerging trends throughout the region regarding the relationship between agroforestry and food security.

Edible mycorrhizal fungi (EMF) have been consumed since ancestral times by humans either as food, medicine or for ceremonial use Nowadays, they are a non‐timber forest product and a diverse genetic resource with great ecological, sociocultural, economic, medicinal and biotechnological relevance around the world Therefore, they have a paramount role to play in meeting the United Nations global sustainable development goals 2030 EMF may promote forest sustainability, biodiversity conservation, mitigation of greenhouse gas emissions through the maintenance of forest masses, human nutrition and health, economic development, conservation of biocultural heritages, women empowerment and hunger mitigation We provide a worldwide review of the knowledge, biodiversity, novel approaches, future challenges and perspectives in the post‐COVID era of this important genetic resource whose relevance has usually received marginal attention despite its strategic global significance Ectomycorrhizal fungi play a key role in the structure and functioning of forest ecosystems They have a paramount importance in nutrient cycling, plant protection against pathogens and abiotic stress, and establishment of underground networks that connect trees and other plants in nature, therefore being the wood wide web, the ‘internet’ of the forests According to our literature review, globally 970 mycorrhizal fungal species (including both mushrooms and truffles) are edible, and they have enormous relevance either as a source of subsistence in low‐income human groups around the world or as an important economic component whose international commerce is worth billions of American dollars annually Since edible mycorrhizal fungi (EMF) are a non‐timber forest product, their sustainable use and management is crucial in order to maintain forest stands and to provide well‐being to the human communities surrounding the forested areas where they grow In different parts of the world, different cultures have developed a traditional knowledge of EMF over millennia Their knowledge might play an important role in food supply and food security in the future, hence contributing towards the “zero hunger” global goal The biotechnological development of EMF has also been crucial in the establishment of plantations, or successful reforestation and ecosystem restoration, which contribute to climate change mitigation by reducing greenhouse gas emissions Here, a worldwide review of how EMF might contribute to forest sustainability, food supply, biocultural conservation, and hunger and climate change mitigation is addressed by analysing the similarities, contrasts and challenges in all five continents [ABSTRACT FROM AUTHOR] Copyright of Plants, People, Planet is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission However, users may print, download, or email articles for individual use This abstract may be abridged No warranty is given about the accuracy of the copy Users should refer to the original published version of the material for the full abstract (Copyright applies to all Abstracts )

An accounting system helps to provide information for planning and control of production. This article presents a Life Cycle Costing by using an Activity Based Costing approach of an innovative forestry company. In order to perform a cradle-to-gate assessment the study covers the forest and industrial activities of the forest product processing. The costs of each product in the portfolio are determined by the treatment activities they undergo. The inventory covers several years of activity of the company, which makes it possible to calculate the uncertainty of the average results with Monte Carlo simulation presented in the result section. Based on the results a products portfolio analysis was performed to identify the development progress phases of the mains products to support the product rollover strategy decision.

The growth of pulp and paper industries has encouraged the expansion of the industrial plantation forests for pulp wood. The exotic species planted for pulp wood initially maintained a relatively high productivity, however it decreases in the following rotation cycles. The peat land wood species of Sumatera could be an alternative for exotic species. However, the insufficient information on the wood properties has brought about they are less considered. This paper examined the fiber quality of Sumatran local peat-wood and its possibility as a raw material of pulp and paper. For specific gravity, samples were selected based on three different diameter groups in each plot. Fiber properties (dimension and fiber derivative values) used to asses the suitability of the wood for pulp and paper raw material were determined in accordance with the method of the Forest Product Laboratory (FPL). The resulted data and information were compared to those of krasikarpa (Acacia crassicarpa Benth.). The results showed that the fiber quality of sekubung wood was classified into grade II, while gerunggang and mahang putih were classified into grade III. The specific gravity of gerunggang wood was higher than these of other woods and comparable to that of krasikarpa. Although the growth of Sumatran local peat-wood is still low, however, conformity with government regulations (Government Regulation Number 57-2016 and Ministry of Environment and Forestry Regulation Number 17-2017) and fiber quality, the local peat-wood could potentially substitute the exotic wood species.

The successful rehabilitation of Wanagama teaching forests, which began in the late of 1960s, has created a distinctive forest ecosystem. Currently the forests become the habitat of Apis cerana, enterprised by the surrounding villagers to produce natural forest honey as a non-timber forest product. This paper aims to explore the adoption of smallholder beekeeping of A. cerana, the beekeepers’ socio-economic characteristics, the potential and value of forest honey production, the distribution of bee-boxes inside the forests and potential tree sources of nectar and pollen. Data collection was carried out in July - September 2019 with in-depth interview techniques to 38 beekeepers. Field observations and ground checks were carried out on the sites where beekeepers were placing the bee-boxes in the forest. In addition, an analysis of aerial photograph images taken with drone was also carried out to identify the area of trees as sources of nectar and pollen. The results show that between 1982 and 2019 the development of the adoption of the A. cerana beekeeping increased significantly. The total production of honey from 506 bee-boxes reached 658 liters or 894.9 kg in year of 2018/2019. The number of bee-boxes placed in Wanagama was mainly distributed inside Compartment of 13, 17, 14, 16, 5, and 18. Acacia mangium, eucalyptus, cajuput and mahogany were the main types of nectar-producing trees, in addition to the abundance of flowering undergrowth plants. Many of the challenges faced by honey beekeepers included climate change, the shortage of nectar and pollen sources, pests and diseases and human disturbances. This research suggests the need for a social, institutional and technical approaches to increase the forest productivity as sources of nectar and pollen. It is suggested encouraging the smallholders to adopt beekeeping as the main livelihood alternatives in future and planting more trees in Wanagama forests.

Forests has a role in supporting food security programs. Sebaju Village Forest, Nanga Kebebu Village, Nanga Pinoh District, Melawi Regency is a village forest area that has the potential of non-timber forest product, one of which is that there are many plants that can be used as food for daily living needs. The research objective was to explore local knowledge of the community and to make an inventory of the types of plants used as food by the communities around the Sebaju village forest, Nanga Kebebu village, Melawi regency, as well ass to describe how to uses and process plants that are used as food by the community. The research method was purposive sampling and data collection was carried out by in-depth interviews with the community in Nanga Kebebu village. The data were analyzed descriptive qualitative in order to obtain a systematic and accurate picture. The results found 58 plant species consisting of 31 families, these plants were dominated by the Anacardiaceae family (8 species). Arecaceae and Moraceae (5 species), Sapindaceae, Phyllanthaceae, Myrtaceae, and Fabaceae (3 species), while one other family each has 1-2 species. The most dominant plant habitats were trees with 40 species (68.96%), 8 types of herbs (13.79%), 4 types of shrubs (6.89%) and the least were lianas and 3 types of shrubs. (5.17%). The part of the plant that was used the most was the fruit, namely 44 species (75.38%), 8 types of leaves (13.79%), while the parts of the plant that were least used were 2 types of tubers (3.45%), 2 types tubers (3.45%), 1 flower (1.72%), 1 seed (1.72%). The largest group of foodstuffs is fruit as much as 40 types (67%), 12 types of vegetables (20%), while the lowest is 3 types of drinks (5%), 3 types of spices (5%), and 2 tubers type (3%). The most widely used food crop processing method is directly used 33 types (56.90%), 10 types of boiled (17.24%), 6 types of sauteed (10.34%) and 5 types of chili sauce (8.62%), Meanwhile, the least used processing methods were 2 types of frying (3.45%) and 2 types of drying (3.45%). Based on their growth status, the highest growth was in the wild, consist of 34 species (59%), and the lowest was cultivated by 24 species (41%) that grew in the Sebaju customary forest area, Nanga Kebebu Village, Nanga Pinoh District, Melawi Regency. Sebaju village forest has high biodiversity as food plant and local knowledge of te community in the use of plants in the forest area makes conservation efforst better because the community strives to be able to make a sustainable management of food from forest.ÂÂ

Nyamplung (Calophyllum inophyllum) is a potential type of non-timber forest product (NTFP) with high oil yield which is useful as an alternative renewable energy sources and herbal medicine-cosmetics. Result of population selection level in Java Island have been used to build Provenan Seed Stand (PSS) nyamplung in KHDTK Wonogiri (Central Java) as an improved seed source with high oil yield and fruit productivity. Seed become nyamplung part that is used as oil raw material which is strongly influenced by flowering and fruiting period. Information on flowering fruiting ability and period is needed to support the availability of raw materials in a sustainable supply for the nyamplung oil industry. Seed become nyamplung part that is used as oil raw material which is strongly influenced by flowering and fruiting period. Information on flowering fruiting ability and period is needed to support the availability of raw materials in a sustainable supply for the nyamplung oil industry. Observation of flowering and fruiting period focused on 465 individual trees in nyamplung PSS at KHDTK Wonogiri through monthly monitoring by calculated flowering fruiting individual tree during 5 years (2014-2018). The results showed that the flowering period of nyamplung in TBP Wonogiri varied during 2014-2018. Flowering and fruiting occurs almost throughout the year. However, the peak of flowering and fruiting occurs mostly in March-August (end of the rainy season to the middle of dry season). In general, the trend of flowering and fertilization increased in 2014-2016, then decreased in 2017-2018, which is thought to be influenced by the higher canopy density. The environmental factor that most influences flowering is number of rainy days, while fertilization of TBP was strongly influenced by temperature. The management of TBP require future action such: second thinning, top pruning, application of fertilizers and hormones to stimulate flowering, and further detailed observations of flowering fruiting stage and its interaction with microclimate.

Proper harvesting of forest products is crucial for sustainable management but due to low level of skill in and awareness of harvesting, forest is deteriorating and harvesting forest products is wasteful. As harvesting is one of the important factors in minimizing waste and damage and achieving forest sustainability, this study was essential. This case from community forest (CF) of mid-hills region demonstrated the status of existing harvesting practices, tools and techniques used and recommended appropriate mechanism for improving such practices. Semi-structured questionnaire survey was performed with 40% of the total households, five key informant interviews and field observations during the harvesting process at the study site for gathering data. Data were analyzed using descriptive statistics and presented in charts and tables. The study revealed the use of traditional harvesting methods and conventional tools like sickle, bill-hook, and axe but limited use of modern tools. Deviation from the operation plan during block selection and harvesting of trees were observed. Appropriate tools and training to users along with regular monitoring by forest officials are needed. This study will help policy makers, planners and forest officials to make necessary provisions for improving harvesting practice in community forests of Nepal.

Kesambi (Schleichera oleosa (Lour.) Merr.) is a host plant that becomes priority in lac culture in Indonesia. Shellac is one of the non-timber forest product commodities, which is potential to be one of foreign exchange sources. World demand of shellac is increasing throughout the year so that the improvement of shellac productivity is required to fulfill the demand. One of the alternatives is implementing the fertilization due to host plant quality improvement considering that host plant is the source of nutrient of shellac. The activity of fertilization aims to understand the effect of fertilization dosage to the improvement of the branch length as well as productivity of shellac in KPH Probolinggo. The greatest average value of branch length during three and six months, respectively were 66.48 cm and 83.24 cm. While, the greatest average value of shellac productivity was 84.29 g. The treatment of fertilization in different dosage to the kesambi (Schleichera oleosa (Lour.) Merr.) was not give significant effect to the length of branch as well as shellac productivity. Keywords: fertilization, Kesambi, Shellac

The social forestry program which aims to improve the condition of forests and the welfare of the community is a solution in forest governance in Indonesia. However, implementation of social forestry in the field still shows very low performance both qualitatively and quantitatively. Therefore, a transition to a more holistic social forestry management concept is needed, which can be pursued through the implementation of the main social forestry development strategies which include: area management, institutional management and business management. As one of the pillars in the strategy of developing social forestry, business management determines the impact of social forestry activities on improving the welfare of the community. This article aims to present the design of the activities which is needed in establishing business management on social forestry permit schemes in production forests. Analysis of the policy content and the implementation of social forestry programs using interview methods and field observations were presented in both qualitatively and descriptively. We found that, the various activities are business partnerships with corporation or Forest Management Unit, greater authority for communities to harvest forest products, simpler forest product administration regulations, incentives for processing forest products, and ease in obtaining capital support.

Una evaluación del aprovechamiento de Bonellia sprucei Mez como producto forestal no maderable se realizó en las localidades de Las Peñas y Soledad de la localidad de Julcuy, para conocer sobre el aprovechamiento y potencialidades de uso de los Productos Forestales No Maderables derivados de esta especie. Se realizaron recorridos de campo, entrevistas y charlas, así el objetivo del trabajo consistió en evaluar el aprovechamiento de Bonellia sprucei Mez, en las localidades antes mencionadas, a través del método empírico de encuestas y la realización de un muestreo aleatorio estratificado; para el muestreo se establecieron transectos de 20 m x 50 m. Mediante un inventario florístico en el bosque seco tropical de aquellas localidades, se comprobó el grado de asociación de ese taxa con otras especies, así mismo se determinó su abundancia, los porcentajes, cantidad de uso y sus derivados. Los resultados revelan la composición del ecosistema, y demuestran que estos productos no se explotan al máximo. La distancia de los árboles a las viviendas es una variable que incide en el precio final del producto.

Copaifera oleoresin is an important traditional non-timber forest product in the Amazon; however, the Carajas National Forest has no plans to harvest this product to benefit extractive families. The objective of this study was to determine Copaifera oleoresin extraction potential in the Carajas National Forest, Eastern Amazon, identifying variables that could increase the chances of finding oleoresin. We mapped 129 trees and formulated a multiple logistic regression model (logit) with the collected variables: diameter at breast height (DBH), tree crown, tree health, presence of termites, and presence of damage or bifurcation. Among the mapped trees, we perforated 50 trees to harvest the oleoresin. Most of the oleoresin production occurred in trees with a DBH between 50 and 75 cm. The logit model predicted that an increase in DBH, dense crown, unhollowed trunk, and presence of damage or bifurcation increased the chances of oleoresin extraction, whereas termites did not. The model could contribute to the sustainable management of forest resources by avoiding random perforation of trees and establishing rational routes and cycles of extraction. Since the variables are easily measured, the model can be continuously used for future extractions.

Improving forest product value chains is considered a means to solve forest-related challenges in the Global South. The ‘Participative Innovation Platform’ (PIP) instrument has been developed to design and to continually adapt solutions and strategies for effective cooperation amongst value chain actors. The instrument is rooted in the action-oriented and social learning approach, combined with the concept of innovation systems. This paper presents findings from three PIPs conducted for upgrading non-timber forest product value chains in Ethiopia (bamboo, natural gums) and Sudan (gum Arabic). A comparative analysis of highest ranked contents revealed similarities in the challenges: lack of government support, poor infrastructure, producers’ lack of knowledge and skills, and lack of market information. Priority upgrading measures focused on producers’ knowledge, skills, and capacity to engage in collective action and to lobby interests, and on capital resources to invest in processing technology. It is concluded that although the PIP instrument presents an innovative way to upgrade forest-based value chains, the instrument requires a long-term process with frequently held platform meetings, conducted by neutral institutions with skilled moderators. Crucial in this process is the need to consistently verify and ensure that all actor groups of the chain are represented, and are confident they will derive benefits from the value chain upgrading.

Inadequate documentation and information of Non-Timber Forest Products (NTFPs) in the study sites call for the assessment of composition and diversity of the concern products. Therefore, the aim of the study is to assess the Composition and Diversity of Non- Timber Forest Products (NTFPs) in Baturiya Wetland Game Reserve, Jigawa State, Nigeria. A four (4) transects of 1km length was laid at an interval of 400 m. Likewise, in each transect, 4 plots of 100 x 100 m was laid alternately along each transect at 200 m interval. Also four (4) quadrants of 1m x1m in size for small non-timber forest products was randomly laid in each 100 x100m plot for each of the habitats in each plot, plant stocks identified were recorded. Data collected were analysed using Simpson index, Sorenson index and descriptive statistic. Results showed that Upland area had the highest species, number of individual and diversity of Non–Timber Forest Product followed by Swampy area and Fadama area with the values of (94, 1464, D-0.981), (63, 842, D-0.970) and (60, 805, D-0.969) respectively. Upland area and Swampy area had the highest similarity index of 78.5%. The results suggest that the documentation, inventory and management of NTFPs should be addressed in operational plan to enhance its diversity

Known locally as the the lightning mushroom or tiger milk mushroom, Lignosus sp. is well-known as mushroom. Lignosus sp. is categorized as nontimber forest product which has potential to be developed due to its advantages. Interview and literature review were carried out during this study to investigate the ecology, ethnomycology, and economic potential of Lignosus sp. Study result showed that currently the fungi Lignosus sp. in Kotabaru Regency can be found around the forest area that is administratively included in the Muara Urie and Buluh Kuning Villages. Local community has been used this fungi as traditional medicine, such as for cough medicine and postnatal care for mothers. In addition, local people harvest this fungi and sell it to middleman. However, the information of cultivation of this mushroom still limited particularly in South Kalimantan. Therefore, further studies need to be investigate.

Forests are an integral and inseparable part of the lives of the people who live around them. The potential of natural resources in Indonesia are plentiful, it has a severe impact and high damage. The deteriorating condition of forests, among others are also not balanced with the ability to create plantations and adequate in accordance with the needs of industrial markets. Of the total area of Banten Province amounting to 966,292 Ha, the Area of Forest Area in Banten Province in 2017 according to the Decree of Partial Determination of Forest Areas is an area of 195,286.09 Ha. The purpose of this research is to provide a solution to the Banten Provincial Environment Agency regarding its role in overseeing and controlling the management of forest product resources to implement good environmental governance. The method used in this research is an empirical normative juridical approach, which is an approach that focuses on norms or norms, so that the problem will be assessed and analyzed by referring to the applicable laws and regulations relating to the problem of managing forest resources.

The study of utilizing the diversity of non-timber forest product species by testing the value of cultural importance or Index of Cultural Significance (ICS) analysis aims to identify the species of non-timber forest products with highest importance value for local communities. The results of this study documented (1) list of species of non-timber forest products that have an important role in the Malay community in Tanjung Jabung, Jambi, including foodstuffs (51-77 plants), vegetable ingredients (21 plants), medicinal materials (> 77 plants), equipment materials (62 plants), pulp and paper materials (27 plants), and other non-timber forest products; (2) list of species of the potential non-timber forest products to be further developed as fruit-producing plants (12 species), vegetables (10 species), medicinal plants (6 species), pulp and paper-based plants (6 species), plywood (18 species), basic materials for manufacturing equipment, arts and other local technology (8 species); and (3) basic data on economic valuation studies of non-timber forest products. The potential species that have high importance value to be cultivated plants were rambai (Baccaurea spp.), cempunik (Artocarpus hispidum), durian (Durio zibethinus, Durio oxleyanus, and Durio spp.), and rambutan (Nephelium lappaceum and Nephelium spp.) for fruits, rotan jernang (Calamus draco and Calamus spp.) as a medicinal material, and other uses. Specifically the diversity of potential species of non-timber forest products will be discussed in this paper.

Shiitake mushroom (Lentinula edodes) is one of the most commonly consumed mushrooms and an important forest product in Japan. In outdoor log cultivation of shiitake, colonization of logs by wild fu...

This study aimed to assess the levels of community awareness to the environmental effects of growing use of forest product for peoples’ livelihood and their management practices in Jimma Zone. Thus, local farming communities, Development Agents (DA), Agriculture and Natural resource, Forest and Environmental Protection Officials & Experts are the participant of this study. The study employed descriptive survey research design and both qualitative and quantitative methods of data collections were employed. To assess community environmental awareness survey questionnaire questions (both open and close ended) were distributed for 240 sample respondents. An interview with10 Key informant interviews were also conducted with the head of natural resource management offices of selected woredas and six development agents (DA) in sample selected kebeles and four focus group discussions (FDG) consisted of 10 members were also employed to collect qualitative data.The findings show that all the respondents aware of forest and natural resource degradation about (87%) and (75.4%) were aware of clearing of forest to expand farmland for growing population and cutting trees for fuel wood, charcoal and other forest productsrespectively. Only very few of the respondents were indicate that lack of community awareness to sustainable use and management of forest resource (44.5%)and lack of clear understanding of forest laws and regulation among the community (40.4%)as a cause of deforestation. Therefore, the assessment of community awareness to forest resource degradation survey result shows that all of the farmers in the study area have been aware of natural resource and environmental degradation. Based on the findings of this study, it is recommended that there is a need of modifying educational/training programs for local communities considering the existing knowledge and practices in a particular area.

Conservation and development of non-timber forest product (NTFPs) commodities in East Nusa Tenggara (NTT) are urgently needed. NTFPs are a source of livelihood for the rural communities around the forest areas. NTFPs development around the forest areas is needed as a means to create livelihoods and reduce poverty. The management strategy for forest areas based on integrating conservation and community welfare improvement is needed. The research aims to determine the NTFPs potency in Sikka Regency and the socio-economic conditions of NTFP farmers and to initiate the conservation and development of NTFPs based on the agroforestry approach. The research was conducted through literature review, secondary and primary data collection through surveys, interviews and field observations. The results of the study showed that tamarind (Tamarindus indica L.), candlenut (Aleurites moluccana (L) Willd.), areca nut (Areca cathecu L.), and betel (Piper betle L.) is the major of NTFP commodities in Sikka district. The socio-economic conditions of NTFP farmers on surrounding farmer are not prosperous yet, and highly depend on the sustainability of NTFP production. Community initiatives to conserve and regenerate NTFPs through agroforestry need to be improved, especially in improving the rate of plant growth. Technical assistance to increase community capacity in conservation and development of NTFPs around forest areas and private land is still needed.

Selective Cutting and Line Planting (TPTJ) silvicultural systems and Indonesian Selective Cutting and Planting (TPTI) are two of the five silvicultural systems that have been determined by the Ministry of Forestry Regulation No. P.11 / Menhut-II / 2009 juncto P.65 / Menhut-II / 2014 concerning silvicultural systems in the area of timber forest product utilization permits (IUPHHK) in production forests. Three other silvicultural systems based on the regulation are the Gap Logging silviculture system, the Fully Made Rejuvenation System, and the Multi Silviculture System. This study aims to examine the implementation of the TPTJ and TPTI systems in the PT Intracawood Manufacturing (PT Intraca) area, Bulungan Regency, North Kalimantan. The methodology of this research is through the approach of growth analysis, comparison of stand increment, observation of environmental conditions, interviews and literature study. Based on the field research, it was found that the diameter increments of Shorea leprosula, Shorea dasyphila, and Shorea parvifolia were greater in the TPTJ system compared to TPTI. However, the TPTI silviculture system at PT Intraca is easier to apply in the field than the TPTJ silviculture system. The TPTJ system has become less effective because planting in the TPTJ system has been carried out by making a 3-meter wide track with a length of approximately 1 km in a plot and if there is potential for the wood to become ineffective. In the area of PT Intraca, to improve the effectiveness of the TPTJ system a mosaic system is used where the planting path is made only in areas with less potential and representative for planting. The types of plants planted in the TPTJ system are far superior, perspective, and are faster than the types of plants in the TPTI system. Planting/enrichment in the TPTI system is easier because it does not need to make a planting path. Planting with seedlings from the extraction is only a transfer from the growth of tillers from areas with an excessive potential for tillers.

Previous research on community forestry in Thailand has mainly focused on its institutional dimensions. Comprehensive knowledge on the production of non-timber forest products and on harvesting practices and decision-making processes is therefore still limited, particularly in relation to community-based forestry. A survey was performed to estimate the production of non-timber forest products and to characterize the diversity of harvesting practices and decision-making processes in northern Thailand's community forests. Field investigations were conducted once a month for 12 months in seven community forests in the Lainan sub-district in Nan Province, using a grid-based sampling technique. Production and productivity of the main non-timber forest products were calculated by total fresh weight. In-depth interviews were conducted individually with 231 local harvesters to understand their non-timber forest product harvesting practices and decision-making processes. Young shoots of Melientha suavis, queen broods of Oecophylla smaragdina and edible mushrooms were found to be the three main non-timber forest products collected, with productivity of 2, 12, and 2 kg/ha/year, respectively. Harvesting practices were characterized as applied by (A) landless villagers, (B) small- and medium-sized landholders, (C) larger landholders, and (D) outsiders. Local harvesters displayed different decision-making processes in resource harvesting depending on periods of resource availability, the duration of harvests and the quantities harvested. These quantitative data on resource productivity together with knowledge of harvesting practices and decision-making processes among harvesters will provide input to a participatory resource management process to support exchanges of knowledge among local stakeholders and explore scenarios for appropriate rules of access so as to improve the sustainability of non-timber forest product harvesting.

Forest cover rate is the principal indice to reflect the forest acount of a nation and region. In view of the difficulty of accurately calculating large-scale forest area by traditional statistical survey methods, it is proposed to extract China forest area based on Google Earth Engine platform. Trained by the enough samples selected through the Google Earth software, there are nine different random forest classifiers applicable to their corresponding zones. Using Landsat 8 surface reflectance data of 2018 year and the modified forest partition map, China forest cover is generated on the Google Earth Engine platform. The accuracy of China's forest coverage achieves 89.08%, while the accuracy of Global Forest Change datasets of Maryland university and Japan’s ALOS Forest/Non-Forest forest product reach 87.78% and 84.57%. Besides, the precision of tropical/subtropical forest, temperate coniferous forest as well as nonforest region are 83.25%, 87.94% and 97.83%, higher than those of other’s accuracy. Our results show that by means of the random forest algorithm and enough samples, tropical and subtropical broadleaf forest, temperate coniferous forest and nonforest partition can be extracted more accurately. Through the computation of forest cover, our result shows that China has a area of 220.42 million hectare in 2018.

Rattan cane is an important forest product only second to timber and bamboo, with higher economic value and ecological benefits. Physical and mechanical properties are more important quality performance indexes, which are highly correlated with the processing and utilization of rattan cane. The present paper describes a study of main physical and mechanical properties in different heights of rattan cane for four rattan species, and also makes a comparison of property for Calamus simplicifolius grown in different sites. The relationship between species, cane position, density and mechanical properties of the rattan in China is also discussed. The results show that the physical and mechanical properties differ among four rattan species, and they follow irregular variation pattern with height. The physical–mechanical properties have no significant difference among species except modulus of elasticity, and the same as the different geographical areas. The basic density and mechanical properties gave a more moderate correlation with quadric equation. This result will provide basic data support for property modification and commercial utilization of rattan resources.

Garcinia kola Heckel, called “petit cola” in Cote d’Ivoire and “bitter kola” in Nigeria, is a Non-Timber Forest Product of great socioeconomic importance. Unfortunately, this species is threatened due to overexploitation and deforestation. This study tested the effect of leaf area on stem cuttings to regenerate vegetatively in a non-mist poly-propagator without using exogenous hormones. Three stem cuttings types: greenwood, softwood and hardwood (12 - 15 cm in length) were collected from 24-month years old seedlings. The two top leaves of each cutting type were conserved at different leaf area: 0 cm2, 28.25 cm2, 56.5 cm2, 84.75 cm2 and 113 cm2 (entire leaf area). Observations were made on rooting, sprouting and leafing abilities of cuttings depending to treatments applied. Results showed that all cutting types have presented good ability to shooting and rooting. Cuttings with 113 cm2 leaf areas presented the best rooting (94.44% ± 2.42%) and shouting (95.55% ± 2.42%) percentage and longest primary root length (12.03 ± 0.50 cm). Hardwood, softwood and greenwood cuttings with 113 cm2 leaf area had the best rooting percentage (96.66% ± 3.33%, 96.66% ± 5.77% and 90.00% ± 5.77% respectively). The longest primary root length (13.50 ± 0.97 cm) was observed to greenwood cuttings with 113 cm2 leaf area. Regenerated plants in the forest presented well survival percentage (96.66%). This study shows that it is possible to regenerate entire plants by cuttings without using external hormones in non-mist poly-propagator.

The paper presents the result of the profitability and determinants of the choice of commercialization of non-timber forest products in Kinshasa. This was achieved by means of questionnaire survey administered to 207 vendors of Salacia pynaertii, Gnetum africanum and Pteridumcentrali-africanum. The objectives were to identify the factors which determine the choice of commercializing each non-timber forest product (NTFP) and determine their profitability. Descriptive analysis of all variables collected through the questionnaire survey was undertaken followed by logistic regression of selected factors. Age and marital status determine the choice of commercialization of S. pynaertii, experience is the only explanatory factor determining the choice of G. africanum; age, marital status, market access, place of supply and level of income are explanatory factors determining the choice of commercializing P. centrali-africanum. The results of the daily financial calculations gave the profitability of the 3 NTFPs studied as follows: 5300 CDF (5.7 USD) and 41, 7% for S. pynaertii, 9300 CDF (10 USD) and 86.9% for G. africanum; and 320 CDF (0.34 USD) and 32.2 for P. centrali-africanum.

The COVID-19 pandemic has had a major impact on forest product markets and the forest product industry, and has also seriously affected the sales of forest products. This research aimed to analyze people’s preference for wood furniture and make policy recommendations. We examined the impact of the pandemic on consumers’ preferences for wood furniture from the perspective of accounting. Taking the accounting data of wood furniture enterprises as the research object, through the translog revenue function, and using the relationship between revenue and consumption in economics, we found that the COVID-19 pandemic has reduced consumers’ preferences for wood furniture, but the decline in preference is smaller for wood furniture produced by extra-large furniture manufacturers. This study contributes to the literature and in view of our research results and the severity of the COVID-19 pandemic, we provide policy suggestions for the related governmental agencies and wood furniture manufacturers, in this special environment, that can reduce the negative impact of a pandemic on the wood furniture industry.

The emerging risks and impacts of climate change and extreme weather events on forest ecosystems present significant threats to forest-based livelihoods. Understanding climate change and its consequences on forests and the livelihoods of forest-dependent communities could support forest-based strategies for responding to climate change. Using perception-based assessment principles, we assessed the effects of climate change and extreme weather events on forests and forest-based livelihood among the forest-dependent communities around the Mchinji and Phirilongwe Forest Reserves in the Mchinji and Mangochi districts in Malawi. Content analysis was used to analyze qualitative data. The impact of erratic rainfall, high temperatures, strong winds, flooding, and droughts was investigated using logistic regression models. The respondents perceived increasing erratic rainfall, high temperatures, strong winds, flooding, and droughts as key extreme climate events in their locality. These results varied significantly between the study sites (p &lt, 0.05). Erratic rainfall was perceived to pose extended effects on access to the forest in both Phirilongwe in Mangochi (43%) and Mchinji (61%). Climate change was found to be associated with reduced availability of firewood, thatch grasses, fruits and food, vegetables, mushrooms, and medicinal plants (p &lt, 0.05). Erratic rainfall and high temperatures were more likely perceived to cause reduced availability of essential forest products, and increased flooding and strong winds were less likely attributed to any effect on forest product availability. The study concludes that climate change and extreme weather events can affect the access and availability of forest products for livelihoods. Locally based approaches such as forest products domestication are recommended to address threats to climate-sensitive forest-based livelihoods.

The phenology of trees in agroforestry systems is important for predicting the management and collection of timber and nontimber resources. This study describes the phenological stages of Dipteryx odorata and Dipteryx punctata in agroforestry systems, assessing climatic factors that may affect the phenophases of the species. The study was conducted in plantations in Mojuí dos Campos city, Pará State, Brazil. In each area, 45 trees were monitored, totaling 90 individuals. Observations lasted 25 months (Oct/2015 to Dec/2017). The phenophases evaluated monthly were flowering, fruiting, new leaves, and leaf fall. Data were collected for dendrometric characterization of the trees, as well as climatic variables including rainfall, temperature, humidity, and insolation for the period. For the analysis of phenological data, the intensity, frequency, synchrony, and duration of phenophases were described for each species. The influence of climatic factors on the phenophases was analyzed through multivariate principal component analysis aiming to select the essential variables for phenological studies in the species plantations, as well as to identify correlations. The results indicate phenological seasonality for the two species under study. Species Dipteryx odorata has low synchrony for phenological events. For Dipteryx punctata, the phenophases are synchronous. High correlations between phenological and climatic variables must be evaluated individually for each species, as they have different periods of phenophase manifestation. A fenologia de árvores em sistemas agroflorestais é importante para previsão de manejo e coleta de recursos madeireiros e não-madeireiros. O objetivo deste estudo foi analisar os padrões fenológicos de Dipteryx odorata e Dipteryx punctata em sistemas agroflorestais e avaliar as variáveis meteorológicas que afetam as fenofases das espécies. O estudo foi desenvolvido em dois plantios situados no município de Mojuí dos Campos, Pará. Em cada área, foram monitoradas 45 árvores, totalizando 90 indivíduos, observados durante 25 meses (out/2015 a dez/2017). As fenofases mensalmente avaliadas foram: floração, frutificação, folhas novas e queda foliar. Foram coletados dados para caracterização dendrométrica do porte das árvores, e variáveis meteorológicas de precipitação, temperatura média, umidade do ar e insolação do período. Para análise dos dados fenológicos foi descrito para cada espécie a intensidade, frequência, sincronia e duração. A influência dos fatores climáticos nas fenofases foi analisada por meio de análises multivariadas de componentes principais para selecionar as variáveis essenciais para estudos fenológicos nos plantios, e identificar correlações. Os resultados indicam que há sazonalidade fenológica para as duas espécies analisadas. Para Dipteryx odorata há baixa sincronia para os eventos fenológicos. Para Dipteryx punctata as fenofases são sincrônicas. Altas correlações entre variáveis fenológicas e meteorológicas devem ser avaliadas individualmente para cada espécie pois possuem épocas distintas de manifestação de fenofases.