Search

The development of a rapid, precise and accurate analytical method for the determination of methylmercury in tuna fish samples is described. The method is based on the use of isotope dilution GC/MS with electron impact ionization, a widespread technique in routine testing laboratories. A certified spike containing 202Hg-enriched methylmercury was used for the isotope dilution of the samples. After extraction of the methylmercury from the sample, methylmercury was propylated using sodium tetrapropyl borate in SPME vials and the analytes were sampled from the headspace for 15 min. For isotope measurements, the molecular ion (MePrHg+) was used in the SIM mode. Five molecular ions were monitored, corresponding to the 198Hg, 199Hg, 200Hg, 201Hg and 202Hg isotopes. The detection at masses corresponding to 198Hg was used to correct for m + 1 contributions of 13C from the organic groups attached to the mercury atom on the 199Hg, 200Hg, 201Hg and 202Hg masses with simple mathematical equations, and the concentration of methylmercury was calculated on the basis of the corrected 200Hg/202Hg isotope ratio. The 202Hg-enriched methylmercury spike was applied, with satisfactory results, to the determination of methylmercury in the certified reference material BCR 464. The method was successfully applied to the determination of methylmercury in tuna fish samples, and the obtained results were included in the CCQM-P39 interlaboratory exercise, organized by the Institute for Reference Materials and Measurements (IRMM, Geel, Belgium) with excellent agreement between our results and the average obtained by the other participants. Copyright © 2005 John Wiley & Sons, Ltd.

A novel and fast routine method for the simultaneous determination and confirmation of clenbuterol in bovine and human urine samples by gas chromatography electron ionization mass spectrometry (GC-EI-MS) has been developed. The method employs isotope dilution mass spectrometry (IDMS) and is based on a combination of minimal labeling (a single (13)C label in the molecule) and isotope pattern deconvolution (IPD). This new methodology does not require the construction of a methodological calibration graph, and was compared with the classical IDMS procedure employed in clenbuterol analysis based on the use of a deuterated compound as internal standard (d(9)-clenbuterol) and a calibration curve. The sample preparation consists of simple extraction with dichloromethane, which was dried and derivatized with chloro(chloromethyl)dimethylsilane, generating a cyclic dimethylsilamorpholine (DMS) derivative suitable for GC(EI)MS detection and identification. This compound produces five intense ions in the electron ionization source, which allow the presence of clenbuterol to be confirmed in just one analysis, as demanded by European Union directives. The accuracy of the method was studied by performing recovery experiments at different concentration levels (from 0.3 to 5 ng g(-1)) in 5 mL bovine urine samples using two labeled compounds: an in-house-synthesized (13)C(1)-clenbuterol and a commercially available d(9)-clenbuterol. The detection limit of the method in human urine was 0.050 ng g(-1) with a sample volume of 10 mL, and is thus suitable for antidoping control purposes. Finally, the (13)C(1)-clenbuterol standard was employed for the determination of clenbuterol in two reference materials, BCR-503 and BCR-504 (lyophilized bovine urine). The concentrations obtained were in agreement with the certified values, with a reproducibility of below 1% RSD.

A procedure for Stable Isotope Dilution Analysis in molecular Mass Spectrometry which does not require a methodological calibration graph and can be applied in combination with minimal labelling has been evaluated. This alternative approach is based on the determination of the molar fractions for each pure isotope pattern (natural abundance or labelled) contributing to the isotope pattern observed in the mixture of natural abundance and labelled molecules by multiple linear regression. Two labelled compounds, (13)C(1)-labelled or (13)C(6)-labelled phenol, were compared to study the influence of the number of (13)C atoms in the labelled molecule. The procedure was evaluated by comparing the results obtained for the determination of phenol in NIST 1584 CRM by GC-EI-MS using the classical isotope dilution calibration procedure and the new procedure based on multiple linear regression of isotope patterns without a calibration graph. The results obtained using the proposed procedure agreed well with both the certified values and those obtained using the classical Isotope Dilution Mass Spectrometry (IDMS) calibration procedures. For the evaluated procedure, a full uncertainty budget determination has been developed taking into account all uncertainty sources, including those derived from the uncertainties in the isotope patterns of the natural and labelled compounds. The measurements with the (13)C(1)-labelled phenol provided lower propagated uncertainties in comparison to the use of (13)C(6)-labelled phenol.

A standard GC-MS instrument with electron impact ionisation has been used to develop a fast, simple and reliable method for the simultaneous determination of monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in water samples. Isotope dilution analysis (IDA) is used for the determination of species, taking advantage of a commercially available spike solution containing a mixture of MBT, DBT and TBT enriched in 119Sn. Method detection limits for 100-mL samples were between 0.18 and 0.25 ng L(-1) for the three butyltin compounds with typical RSD between 2 and 4% at levels between 100 and 10 ng L(-1), respectively. Recovery of tin species in spiked samples (natural water, wastewater and seawater) was quantitative. The stability of butyltin compounds in collected seawater samples was also studied. The addition of a 1% (v/v) glacial acetic acid preserved tin species in the samples for at least 5 days at room temperature. The IDA method was finally implemented in a routine testing laboratory and it was subsequently accredited by the Spanish National Accreditation Body according to the requirements of UNE-EN ISO/IEC 17025.