Search

The Whillans Ice Stream Subglacial Access Research Drilling (WISSARD) project will test the overarching hypothesis that an active hydrological system exists beneath a West Antarctic ice stream that exerts a major control on ice dynamics, and the metabolic and phylogenetic diversity of the microbial community in subglacial water and sediment. WISSARD will explore Subglacial Lake Whillans (SLW, unofficial name) and its outflow toward the grounding line where it is thought to enter the Ross Ice Shelf seawater cavity. Introducing microbial contamination to the subglacial environment during drilling operations could compromise environmental stewardship and the science objectives of the project, consequently we developed a set of tools and procedures to directly address these issues. WISSARD hot water drilling efforts will include a custom water treatment system designed to remove micron and sub-micron sized particles (biotic and abiotic), irradiate the drilling water with germicidal ultraviolet (UV) radiation, and pasteurize the water to reduce the viability of persisting microbial contamination. Our clean access protocols also include methods to reduce microbial contamination on the surfaces of cables/hoses and down-borehole equipment using germicidal UV exposure and chemical disinfection. This paper presents experimental data showing that our protocols will meet expectations established by international agreement between participating Antarctic nations.

Rapid advances in high intensity light emitting diodes (LEDs) have provided sufficient tools to design LED solar simulators to accurately mimic the sun. LEDs offer numerous advantages over lamp-based technology currently used. However, these advantages have not been harnessed because of limitations in creating a solar simulator with the highest rating (AAA) for spectral match, temporal stability, and light uniformity. Oriel's VeraSol is one of the first LED, triple A solar simulators. The VeraSol-LED was compared to the equally rated Oriel Sol3A-xenon lamp solar simulator by measuring the current-voltage (I-V) response and spectral response (SR) for a variety of solar cells. Both simulators effectively mimic the sun; however, the results demonstrate the LED-based simulator produced a more stable, flexible, and accurate match to AM1.5G than the xenon lamp-based simulator with similar marks in the quality of PV cell response.

A simple and accurate method for measuring the front facet modal reflectivity of a Fabry-Perot laser diode is presented. In this method, optical feedback from an external mirror of known reflectivity, R(ext), is used to alter the laser diode threshold current. The effect of the external mirror and front facet reflectivities on the threshold current then allows for a measurement of the front facet modal reflectivity of the laser diode and is theoretically and experimentally studied. This method was used to measure a facet reflectivity of R(2) = 0.0151(+0.0018/-0.0032) [R(2) = 0.00592(+0.00085/-0.00123)] for a commercially antireflection-coated facet of a laser diode with a center wavelength of 795 nm (935 nm). The results of the reflectivity measurements based on the threshold current as a function of the external mirror reflectivity are compared with the results of the reflectivity measurements based on modulation depth of the optical spectrum [IEEE J. Quantum Electron. QE-19, 493 (1983)].

The authors report on the optical spectrum of a high power (150 mW) laser diode under large signal intensity modulation with feedback from an external cavity fibre grating. Single longitudinal facet mode operation was maintained for 6 kHz 1% and 3% duty cycle pulsed and 1 Mbit/s psuedonoise code modulation with extinction ratios as small as 0.01.