Search

Recent breakthroughs in bulk crystal growth of the thermodynamically stable beta phase of gallium oxide ($\beta$-Ga$_2$O$_3$) have led to the commercialization of large-area beta-Ga$_2$O$_3$ substrates with subsequent epitaxy on (010) substrates producing high-quality films. Still, metal-organic chemical vapor deposition (MOCVD), molecular beam epitaxy (MBE), and processing of the (010) $\beta$-Ga$_2$O$_3$ surface are known to form sub-nanometer scale facets along the [001] direction as well as larger ridges with features perpendicular to the [001] direction. A density function theory calculation of the (010) surface shows an ordering of the surface as a sub-nanometer-scale feature along the [001] direction. Additionally, the general crystal structure of $\beta$-Ga$_2$O$_3$ is presented and recommendations are presented for standardizing (010) substrates to account for and control the larger-scale ridge formation., Comment: 12 pages, 8 figures

Measuring the thermal conductivity of sub-surface buried substrates are of significant practical interests. However, this remains challenging with traditional pump-probe spectroscopies due to their limited thermal penetration depths (TPD). Here, we experimentally and numerically investigate the TPD of recently developed optical pump-probe technique steady-state thermoreflectance (SSTR) and explore its capability for measuring the thermal properties of buried substrates. The conventional definition of the TPD does not truly represent the upper limit of how far beneath the surface SSTR can probe. For estimating the uncertainty of SSTR measurements of a buried substrate a priori, sensitivity calculations provide the best means. Thus, detailed sensitivity calculations are provided to guide future measurements. Due to the steady-state nature of SSTR, it can measure the thermal conductivity of buried substrates typically inaccessible by traditional pump-probe techniques, exemplified by measuring three control samples. We also discuss the required criteria for SSTR to isolate the thermal properties of a buried film. Our study establishes SSTR as a suitable technique for thermal characterizations of sub-surface buried substrates in typical device geometries.

An all-epitaxial approach was demonstrated to create coaxial plasmon laser structures composed of an alumi-num plasmonic metal / SiNx dielectric / InGaN quantum well shell surrounding a p-GaN nanowire core. Strong UV lumi-nescence was observed from as-grown vertically-aligned arrays as well as horizontally-aligned nanowires transferred to a transparent carrier wafer.

An undoped AlGaN/GaN nanowire demonstrated p-type conductivity based solely on the formation of hole carriers in response to the negative polarization field at the (000-1) AlGaN/GaN facet. A transistor based on this nanowire displayed a low-voltage transition from Ohmic to space charge limited conduction. A numerical simulation showed that a highly asymmetric strain exists across the triangular cross-section, which creates a doublet peak in the piezoelectric induced polarization sheet charge at the (000-1) facet. Additionally, there is a strong interplay between the charge at the (000-1) AlGaN/GaN interface with depletion from the three surfaces as well as an interaction with the opposing polarization fields at two semi-polar {-110-1} facets. The charge distribution and resultant conduction regime is highly interdependent on configuration of the multi-layer structure, and is not amenable to an analytical model.

This article presents the use of flexible metal foam substrates for the growth of III-nitride nanowire light emitters to tackle the inherent limitations of thin-film light emitting diodes as well as fabrication and application issues of traditional substrates. A dense packing of gallium nitride nanowires were grown on a nickel foam substrate. The nanowires grew predominantly along the a-plane direction, normal to the local surface of the nickel foam. Strong luminescence was observed from undoped GaN and InGaN quantum well light emitting diode nanowires.

This article presents the use of flexible carbon substrates for the growth of III-nitride nanowire light emitters. A dense packing of gallium nitride nanowires were grown on a carbon paper substrate. The nanowires grew predominantly along the a-plane direction, normal to the local surface of the carbon paper. Strong photo- and electro-luminescence was observed from InGaN quantum well light emitting diode nanowires.

Epitaxial graphene layers were grown on the C-face of 4H- and 6H-SiC using an argon-mediated growth process. Variations in growth temperature and pressure were found to dramatically affect the morphological properties of the layers. The presence of argon during growth slowed the rate of graphene formation on the C-face and led to the observation of islanding. The similarity in the morphology of the islands and continuous films indicated that island nucleation and coalescence is the growth mechanism for C-face graphene., Comment: 12 pages, 4 figures

In order to make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO2, GaN and Al2O3 substrates using a thermal release tape. We further report on the impact of this process on the electrical properties of the EG films. This process enables EG films to be used in flexible electronic devices or as optically transparent contacts., Comment: 8 pages, 4 figures and supplementary info regarding procedure for transfer