Search

The Maoping superlarge germanium-rich lead–zinc deposit is a typical nonmagmatic hydrothermal deposit that is structurally controlled in the Sichuan–Yunnan–Guizhou lead–zinc polymetallic metallogenic area. The orebodies are distributed in several formations. This paper is based on large-scale alteration mapping combined with porosity and permeability measurements. We delineated the mineralization–alteration zones of different ore-bearing formations, explored the geological significance of porosity and permeability, and proposed prospecting directions. The research results indicate that during the mineralization period, the ore-forming metal fluids migrated from the deep part of the SSW region to the shallow part of the NNE region along the ore-guiding structure (Maoping Fault). Through the ore distribution structure, depressurization boiling occurred in the open space of the NE-trending interlayered sinistral compressive–torsional faults in several ore-bearing formations, resulting in fluid precipitation and the formation of different brecciated hot-melt dolomite lead–zinc mineralization zones. From the orebody to the wallrock, the C2w Formation and D3zg Formation are divided into four different mineralization–alteration zones. Tectonic activity affects the properties, migration, and precipitation of fluids, thereby controlling the alteration characteristics generated during fluid migration and thus changing the porosity and permeability. The porosity and permeability of strata on the NW flank of the anticline are greater than those of strata on the SE flank. On the NW flank, the greater the degree of mineralization–alteration is, the greater the porosity and permeability are, and the porosity of the orebody is lower than that during dolomitization. Finally, we believe that the NW flank of the anticline is an important area for prospecting. The pyrite + striped altered dolomite zone (Zones II–III) in the C2w limestone and the pyrite + strong dolomite zone (Zones II–III) in the D3zg dolomite are important prospecting indicators.

In the modified formula for the cubic law, the roughness correction coefficient C serves as a parameter that indicates the characteristics of the roughness of a rock’s surface. In this study, surface data for natural rock samples were acquired through high-precision 3D scanning and combined with publicly accessible CT scan data on rough rock fractures to generate spatial coordinates. The roughness correction coefficient C was calculated and analyzed using both formulaic and numerical methods. The analysis revealed significant effects of scale on the roughness correction coefficient for rock fractures within a size range of 5 to 10 cm (determined based on the actual sample size), with tensile fractures demonstrating greater variations compared to shear fractures. When calculating the roughness correction coefficient on the same fracture surface in different directions, significant directional effects were observed. Furthermore, elliptical fitting demonstrated favorable results. The conclusion drawn was that the roughness correction coefficient for fracture surfaces can be represented effectively using a tensor form, thereby simplifying the expression of directionality. Calculating and analyzing the fractal dimension of a rough surface further confirmed the existence of effects of size on roughness.

The Daliangzi lead-zinc deposit is located in the southwestern Sichuan ore concentration area in the southwestern margin of the Yangtze block, and the ore body′s occurrence obviously controlled by the structure.Aiming at the problem of unclear ore-controlling rules and combinations of ore-controlling structures, based on the theory and method of ore field geomechanics, through the identification of the mechanical properties of typical ore-controlling structures at different levels and the structural screening of different stages, the ore-controlling structures, assemblages and their formation mechanisms were clarified. The research shows that the metallogenic structural system is the late Indosinian NE structural belt.Under the NW-SE principal compressive stress, the resulting structures of different scales control the occurrence of the ore deposit, ore body and ore vein; At the same time, form various structural assemblages: strike-slip at the deposit scale is dominated by fault-fold tectonic assemblages, and orebody-scale assemblages are "multi-shaped", "in-shaped" and "black fractured zone" structural assemblages.This study provides an important basis for prospecting and exploration in the deep and peripheral parts of the deposit.

The Dahongshan large-scale iron (Fe)–copper (Cu) polymetallic deposit is in the Proterozoic metallogenic domain on the western margin of the Yangtze Block. It is a typical representative of Fe-Cu polymetallic composite mineralization in the Kangdian area. The deposit comprises a group of layered orebodies formed by volcanic exhalation sedimentation and metamorphism, and a group of vein-like orebodies formed by hydrothermal superposition. The large-scale mapping of altered lithofacies in the deposit has resolved issues of weak links and unclear mineralization and alteration zoning of hydrothermal superimposed deposits within the study area. The mineralization type, hydrothermal alteration type and intensity, mineral assemblage, and mineral structure of the vein-type Cu polymetallic deposits during the hydrothermal superposition period are meticulously analyzed and studied. Finally, the zoning relationships of vein orebodies (mineralization) are summarized. On the basis of the results of the study of the distribution pattern of this mineral body, a mineralization alteration zoning model of the hydrothermal superposition period is constructed. The results show that the alteration is primarily silicification, carbonation, and chloritization, and the mineralization is chalcopyrite, bornite, chalcocite, and pyrite. The Dibadu anticline and the cutting layer faults and fractures strictly control the hydrothermal alteration zoning. The mineralization alteration zoning from the core to the flank is divided into coarse vein zone (I) → stockwork zone (II) → veinlet zone (III). The corresponding mineral assemblages are quartz–calcite–chalcocite–bornite–(native copper) (I) → calcite–dolomite–quartz–bornite–chalcopyrite–chlorite (II) → dolomite–quartz–chalcopyrite–(pyrite) (III), where the stockwork zone has the most substantial mineralization. The mineral assemblages of each alteration zone, the characteristics of rare earth elements of typical samples, and the test results on the fluid inclusions confirm that pH and Eh primarily control the zoning mechanism. This study has significance for deepening the understanding of the composite metallogenic system, guiding deep and peripheral prospecting, and providing significant enlightenment for the study of this type of deposit.

The Laoyingqing zinc deposit is located in the Pb-Zn deposit concentration district in northeastern Yunnan, with a geotectonic location on the southwestern edge of the Yangtze block. This deposit occurs in the interlayer fracture zone of the Huangcaoling Formation slate in the Middle Proterozoic Kunyang Group. In this deposit, zinc is significantly enriched compared to lead, and the sulfur isotopic composition of sphalerite shows δ34SCDT close to negative values. These characteristics are different from the common Pb-Zn deposits that occur in Sinian and Carboniferous carbonate rocks in northeastern Yunnan. The genesis of this deposit and its similarities to and differences from other Pb-Zn deposits hosted in carbonate rocks in the Sichuan–Yunnan–Guizhou Pb-Zn metallogenic triangle area (SYGT) need further research. This article selects typical rock (ore) samples for fluid inclusion, trace element, and H–O isotope analyses. The results show that (1) the homogenization temperature of the fluid inclusions is 130~306.5 °C, the salinity is 7.17 wt%~20.67 wt% NaCleq, and the density of the ore-forming fluids is 0.86–1.07 g/cm3. Overall, these ore-forming fluids belong to medium–low-temperature, medium–low-salinity, and medium–low-density ore-forming fluids, and they have reducibility. The fluid pressure is 36.3~85.6 Mpa, and the mineralization depth is 1.34~3.17 km. (2) The ore-forming fluids mainly came from deep-source metamorphic water and basin brine containing organic matter. (3) The ore-forming materials mainly came from the surrounding rocks (Kunyang Group). (4) The trace element characteristics of this deposit are different from sedimentary-exhalative type, magmatic hydrothermal type, and skarn type of Pb-Zn deposits, and have little difference from MVT Pb-Zn deposits. Based on the comprehensive analysis, this deposit is classified as a medium–low-temperature hydrothermal vein-type zinc deposit unrelated to magmatic activity. This study extends the ore-bearing surrounding rocks of Pb-Zn deposits in the SYGT to the slate of the Kunyang Group, enriching the regional Pb-Zn deposit mineralization theory and providing new ideas for mineralization prediction.

The Dahai Pb-Zn mining area is located in the northwestern Pb-Zn district in northeastern Yunnan Province in the Sichuan-Yunnan-Guizhou Pb-Zn metallogenic triangle (SYGT), east of the Xiaojiang fault. Numerous Pb-Zn deposits (spots) occur in clastic rocks in this area. In this study, the Maliping, Laoyingqing, and Jinniuchang Pb-Zn deposits, representative clastic rocks in the Dahai mining area, were selected as research objects. The results of H-O-S-Sr-Pb isotope analyses show that the three deposits mainly formed through the mixing of a basinal brine with a hydrothermal fluid derived from deep within the underlying (deformed) basement, and brines leached organic matter from wall rocks. The δ34S values range from −2.62–30.30‰. The S isotope results show two different sources of reduced S: one in the Laoyingqing deposit derived from the S reduction generated by the pyrolysis of sulfur-bearing organic matter in the carbonaceous slate of the Kunyang Group, and the second in the Maliping and Jinniuchang deposits derived from the S reduction generated by the thermochemical sulfur reduction (TSR) of seawater sulfate in the Lower Cambrian Yuhucun Formation and Sinian Dengying Formation. The Pb isotope results show that the Pb sources of the three deposits are derived from basement rocks (Kunyang Group) with a small portion derived from Devonian–Permian carbonate rocks and Dengying Formation dolomite, both of which have undergone homogenization during mineralization. The Sr content varied from 0.09629 to 0.2523 × 10−6, and the study shows that the main source of Sr is a mixture of ore-forming fluid flowing through basement rocks (Kunyang Group) and through sedimentary cover. However, most of the Sr in the Maliping deposit is derived from marine carbonate, and in the Laoyingqing deposit, it is provided by basement rocks (Kunyang Group). Based on a comparative study of the deposits, the Pb-Zn deposits in the clastic rocks of the Dahai mining area and the SYGT belong to the same metallogenic system and were formed under the same metallogenic geological background. Finally, a unified metallogenic model of the two types of fluid migration and mixed mineralization of the Pb-Zn deposit in clastic rocks of the Dahai mining area is proposed. The metallogenic model provides a basis for the study of the Pb-Zn metallogenic system and guidance for deep and peripheral prospecting in this area.

The Maliping large-scale Pb-Zn deposit is located in the Sichuan-Yunnan-Guizhou Pb-Zn polymetallic metallogenic triangle area (SYGT), where the Pb-Zn ore body is hosted in the interlayer fracture zone at the interface between siliceous cataclastic dolomite and clastic rocks in the Lower Cambrian Yuhucun Formation and is tectonically driven. Unlike other Pb-Zn deposits hosted in the Sinian and Carboniferous carbonate rocks in the area, the metallogenic mechanism and deep and peripheral ore prospecting prediction research require further exploration. In this study, representative samples of a typical orebody profile were systematically collected, and microthermometry of fluid inclusions and H-O isotopes and metal sulfide trace element analyses were performed. The main findings were as follows: (1) The fluid inclusion study showed that the ore-forming fluids have vapor-rich phase reduction characteristics of medium-low temperature, salinity, and density. (2) H-O isotopic studies showed that the ore-forming fluids are derived from the mixing of deep-source fluids flowing through the deep fold basement (Kunyang Group) and organic containing basin brine. (3) Rare earth element (REE) characteristics indicate that the ore-forming materials were primarily derived from the folded basement (Kunyang Group). (4) The trace element study showed that sphalerite is relatively enriched in Cu, Cd, Ga, and Ge, while depleted in Fe, Mn, Sn, and Co, similar to the typical Huize-type (HZT) Pb-Zn deposit in the area. Therefore, it is suitable to explore the deposit using a large-scale “four step style” ore prospecting method for ore prospecting and prediction. Moreover, the results provide a reference for the study of Pb-Zn metallogenic systems and new ideas for the deep and peripheral prospecting of Pb-Zn deposits in this area.

The Laoyingqing Pb–Zn deposit is located on the southwestern margin of the Yangtze block and on the east side of the Xiaojiang deep fault in the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic triangle area (SYGT). This deposit was first discovered in the silty and carbonaceous slate of the Middle Proterozoic Kunyang Group that is structurally controlled by thrust faults and anticlines. This study is aimed at investigating whether the Laoyingqing deposit has the same ore-forming age and type as other Pb–Zn deposits related to the Pb–Zn metallogenic system and prospecting prediction of the deep and peripheral areas of the deposits in the SYGT. Based on the sphalerite Rb–Sr age dating and S–Sr–Pb isotopic composition analysis of the Laoyingqing Pb–Zn deposit, the following results were obtained. First, the Rb–Sr isochron age of sphalerite is 209.8±5.2 million years (Ma), consistent with the ages of most Pb–Zn deposits in the SYGT (approximately 200Ma), thereby potentially indicating that these Pb–Zn deposits may have been formed synchronously during the late Indosinian orogeny. Second, the Pb isotopic compositions of sulfides show a linear trend on the average crustal Pb evolution curve in 207Pb/204Pb vs. 206Pb/204Pb plot. In addition, Pb isotopic ratios were consistent with the age-corrected Pb isotopic ratios of basement rocks, consequently suggesting that the source of mixed crustal Pb is mainly derived from basement rocks. Combined with the initial 87Sr/86Sr ratios of sphalerite between the (87Sr/86Sr)200Ma value of the basement rocks and that of the Upper Sinian–Permian carbonates, it can be concluded that the ore-forming metals were mainly derived from basement rocks. Third, sulfur isotopic composition of sphalerite from the Laoyingqing deposits shows δ34SCDT values that range mainly from -2.62‰ to 1.42‰, which is evidently lower than the δ34SCDT values of sulfides (8–20‰) from other Pb–Zn deposits in the SYGT. This can be interpreted as a result of mixing with reduced S that was mainly derived from the thermochemically reduced S in the overlying strata and a small amount of reduced S produced by the pyrolysis of S-containing organic matter. We conclude that the Laoyingqing deposit and most of the Pb–Zn deposits in the SYGT are Mississippi Valley-type deposits, thereby providing new ideas for investigating the deep and peripheral areas of Pb–Zn deposits.

The seepage performance of a rock mass mainly depends on the rock fractures developed in it. Numerical calculation method is a common method to study the permeability properties of fractures. Seepage in rock fractures is affected by various factors such as fracture aperture, roughness, and filling, among which aperture and roughness are the two most widely influenced factors. The Navier-Stokes (NS) equation can be solved directly for the seepage flow in rock fractures with good accuracy, but there are problems of large computational volume and slow solution speed. In this paper, the fracture aperture space data is substituted into the local cubic law as an aperture function to form a numerical calculation method for seepage in rough rock fractures, namely, the aperture function method (AFM). Comparing with the physical seepage experiments of rock fractures, the calculation results of AFM will produce a small amount of error under the low Reynolds number condition, but it can greatly improve the calculation efficiency. The high efficiency of calculation makes it possible to apply AFM to the calculation of large-scale 3D rough fracture network models. The pressure drop of fluid in the fracture has viscous pressure drop (VPD) and local pressure drop (LPD). VPD can be calculated using the AFM. After analyzing the results of solving the NS equation for fracture seepage, it is concluded that the LPD includes the pressure drop caused by area crowding in the recirculation zone (RZ), kinetic energy loss in the RZ, kinetic energy loss in the vortices, and other reasons.