Search

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material. [ABSTRACT FROM AUTHOR]

Ultralight ceramic foam materials with high porosity play an important role in increasingly hi‐tech areas due to the combinative merit of ceramic material and highly porous structure. So far, it remains challenging to fabricate alumina ceramic foams with extremely high porosity and high specific surface area that are comparable to aerogel materials by employing a low cost, eco‐friendly and convenient approach. For the first time, we propose the preparation of aerogel‐like ceramic foams with nanoscale cell wall and unprecedentedly high porosity using boehmite sol as both ceramic source and bubble interface stabilizer, based on sol nanoparticles stabilized foams using sodium lauryl sulfate (SDS) as modifier. The obtained ultra‐stable sol foams allow for the achievement of bulk foams with ultrathin cell wall with thickness in the range of 30‐90 nm, super‐high porosity up to 99%, and large specific surface area of 280 m2/g, which is attributed to the well‐organized assembly of nanoparticles at the liquid/air interfaces. This novel foam material demonstrates excellent adsorption ability for polar volatile organic gases (VOCs) due to its extremely high porosity and large specific surface area. Ultralgiht cellular ceramic foams composed of uniformly assembled nanoparticles with nanoscale cell wall. [ABSTRACT FROM AUTHOR]

Three‐dimensional ceramic nanofiber‐assembled materials with large specific surface area and excellent thermal insulation properties are attracting increasing interests for their unique structure and promising applications. In this paper, we propose a facile methodology to fabricate three‐dimensional silicon nitride nanofiber‐knitted ceramic foams via in situ reactive synthesis from silicon foams. Silicon particle‐stabilized foams are fabricated for the first time using long‐chain surfactant cetyltrimethyl ammonium bromide as a hydrophobic modifier. First, the fabrication and stability of silicon foams are investigated. Based on the stable silicon foams, silicon nitride‐based nanofiber‐knitted ceramic foams are synthesized via in situ reactive sintering in nitrogen atmosphere. The novel ceramic foam materials consist of three‐dimensional nanofiber‐assembled strut wall and nanofiber‐spheres in the pores. The diameter of obtained silicon nitride nanofibers ranges from 15 to 100 nm. The unique nanofiber‐knitted foams may have potential applications in specific fields, including catalysis, adsorption, separation, and thermal insulation. [ABSTRACT FROM AUTHOR]

Hierarchical structured porous ceramics have attracted tremendous research interests because of their numerous excellent properties including robust mechanical strength and large surface area. In this work, silicon carbide (SiC)‐based porous ceramics with three levels of pore hierarchy are fabricated from silicon particle‐stabilized foams and a subsequent one‐step calcination after they were embedded with coke. Three‐dimensional (3D) flexible nanofibrous network is adhered and wrapped on cell walls of porous ceramics, which is readily fine‐tuned and tailored by the temperature to provide optimized pore structure. The resultant SiC‐based porous ceramics present a density of 1.03 g/cm3 at a porosity of 72% with a large quantity of hierarchical micro‐ and macropores. This hierarchical structure leads to robust compressive strength (23.52 MPa) and large surface area (64.32 m2/g). The fabrication method is straightforward and sought‐after, providing a facile technical route for advanced hierarchical porous ceramics used in filtration and catalysis fields. [ABSTRACT FROM AUTHOR]

Herein, the advantage of single-shell hollow microspheres on forming pores has been exploited to acquire porous ceramics with homogeneous microstructure, while the hollow microspheres also acted as reaction source. Dispersant reaction method has been applied to realize the perfect combination between microspheres and Si3N4 particles, which could be attributed to the repulsion between particles is weakened, particles agglomerate together and holding microspheres among them tightly. Owing to the normal distribution of hollow spheres and their single-shell structure, porous Si2N2O-Si3N4 ceramics with uniform pore distribution have been fabricated. The results show that the addition of silica hollow spheres contributes to the decrease in dielectric constant, since their porosity could be increased effectively and Si2N2O phase exhibiting low dielectric constant is generated. High-performance porous Si3N4 ceramics with porosity of 45.7% have been prepared through employing fly ash hollow microspheres, which possess flexural strength of 108.76 ± 6.25 MPa, fracture toughness of 1.78 ± 0.09 MPa m1/2 and dielectric constant of 3.53. This strategy is proved to be a convenient, eco-friendly and effective method to synthesize ideal candidates for radomes. [ABSTRACT FROM AUTHOR]

A novel kind of nanowire sponges, namely Si3N4 nanowire‐weaving microspheres, synthesized from a simple, convenient, high‐efficient approach are proposed here. As the reverse template, three‐dimensional foam skeleton structure with uniform pores and ultrathin pore walls is constructed via the effective particle‐stabilized foam method, where the silica sol and carbon black are chosen as the raw materials, providing the sufficient space for the growth of nanowires during the carbothermal reduction reaction process. The formation mechanism of this novel sponge is studied via multiple characterization methods. Si3N4 nanowires formed microspheres possess uniform and curving morphology due to the stable environment for growing via vapor–solid mechanism, leading to the relatively high specific surface area of 86.77 m2/g. Owing to in‐situ oxidation process, micro‐spherical SiO2 nanowire sponges with similar morphology are synthesized, which present diameter in range of 20‐40 nm and specific surface area of 50.47 m2/g. This work provides insights for the design of high‐performance nanowire sponges with promising applications in the filtration, thermal insulators, and catalyst supports fields. [ABSTRACT FROM AUTHOR]

Abstract: In order to investigate the relationship between pore structure and thermal conductivity as well as mechanical strength, porous alumina ceramics (PAC) with various pore structures were fabricated, using starch as the pore‐forming agent. Fractal theory was employed to characterize the pore size distribution more accurately than ever used parameters. The results show that the increase in starch content in PAC leads to an enhanced porosity, a higher mean pore size, and reduced fracture dimension, thermal conductivity and strength. The fractal analysis indicated that the fractal dimension decreases gradually and reaches its minimum value with increasing the starch content up to 25 wt%, but the further incorporation results in an opposite trend. It is suggested from micro‐pore fractographic analysis that the optimization of both thermal insulation performance and mechanical strength are positively correlated with the increase in the mean pore size and proportion of 2‐14 μm pores but negatively corrected with the porosity. These results provide a new perspective and a deeper understanding for fabrication of PAC with both excellent thermal insulation and mechanical performance. [ABSTRACT FROM AUTHOR]

Abstract: A novel method for fabrication of highly porous barium strontium titanate (BST) ceramic foams based on particle‐stabilized foaming method was developed for the first time, in which propyl gallate (PG) was employed as BST particle modifier. The results showed that the stability of wet BST foams closely depends on the pH value and PG concentration, which could be explained by the adsorption behavior of PG on BST particle surface. BST ceramic foams with dense, uniform, and closed pore and defect‐free wall were obtained. The pore size and porosity can be well controlled by adjusting solid loading and sintering temperature. It was revealed that not only sintering temperature but also solid loading significantly influenced the growth of BST grain. The BST ceramic foams exhibited high porosity in the range of 81%‐95%, low dielectric constant in the range of 47‐150, and low dielectric loss below 0.0025. The BST ceramic foams with higher porosity presented a tendency of lower dielectric constant and the fitting results indicated that the natural logarithm of dielectric constant was linear correlated with porosity. [ABSTRACT FROM AUTHOR]

In this study, a facile one-step method combining the pore expansion and the enlargement of the hollow cavity of hollow periodic mesoporous organosilica spheres (HPMOSs) into one step was proposed. Moreover, the whole process for the formation just needs 1 h and involves reaction just under normal pressure and temperature. We further investigate the influence of different expanders and the amount of expanders on pore size and hollow cavity size. The obtained HPMOSs using tridecane as expander possess excellent properties, including good spherical morphology, large hollow structures, radially oriented mesochannels (3.44 nm), uniform particle size (115 nm), high BET surface area (1298 m/g), and large pore volume (1.96 cm/g). In addition, the hollow cavity size and the mesoporous size can be controlled via the modulation of tridecane amount. This method also provides a basis for synthesizing both large pore and the hollow cavity of functionalized, monodispersed HPMOSs. [ABSTRACT FROM AUTHOR]