Search

Stimuli-responsive structural color in nature has fascinated scientists, directing them to develop artificial coloration materials that adjust colors in response to external stimuli. Many stimuli-responsive structural color materials have been realized. However, only a few have reported on all-liquid-type materials, which have a particularly desirable feature because they impart their function to the device of any shape. We have previously reported the development of a consistent structural color within a narrow temperature range for all-liquid-type emulsions comprising a long-chain amidoamine derivative (C18AA) and tetraoctylammonium bromide (TOAB). In the present study, we demonstrate that introducing NaCl as an electrolyte affords a highly thermo-sensitive color-changing ability to the emulsions. The structural color of the emulsions can be controlled from red to blue by tuning the temperature. Furthermore, the C18AA and TOAB concentrations can independently regulate the color and coloring-temperature, respectively, realizing that the desired color can develop at a given temperature.

Metal nanowires (NWs) with a diameter of a few nanometers have attracted considerable attention as a promising one-dimensional nanomaterial due to their inherent flexibility and conductive properties and their weak plasmon absorption in the visible region. In a previous paper, we reported the synthesis of ultrathin 1.8 nm-diameter Au NWs using toluene-solubilized aqueous solutions of a long-chain amidoamine derivative (C18AA). This study investigates the effect of different organic solvents solubilized in C18AA aqueous solutions on the morphology of the Au products and demonstrates that solubilizing methylcyclohexane yields thick 2.7 nm-diameter Au NWs and 3.3 nm-diameter Au-Ag alloy NWs. Further, the surface-enhanced Raman scattering sensitivity of ultrathin Au NWs, thick Au NWs, and thick Au-Ag alloy NWs were assessed using 4-mercaptopyridine and found that their enhancement factors are 10

Colloidal photolithography is a versatile advanced technique for fabricating periodic nanopatterned arrays, with patterns carved exclusively on photoresist films deposited on solid substrates in a typical photolithographic process. In this study, we apply colloidal photolithography to polystyrene (PS) films half-covered with poly(methyl methacrylate) (PMMA) colloids at the air-water interface and demonstrate that periodic hole structures can be carved in PS films by two processes: photodecomposing PS films with ultraviolet (UV) light and removing PMMA colloids with a fluorinated solvent. Nonspherical holes, such as C-shaped and chiral comma-shaped holes, are also fabricated by regulating the UV illumination conditions. Furthermore, in addition to holes, convex patterns on PS films are realized by combining weak UV illumination with solvent treatment. We also demonstrate that actively using the water surface as the UV illumination field enables periodic silver nanoparticle spots to be deposited on PS films simply by dissolving silver ions in the water phase.

Ultrathin Au nanowires (NWs) with a diameter below 2 nm have attracted considerable attention as a promising one-dimensional nanomaterial. However, they are practically synthesized in organic solve...

Electrochemical water splitting using renewable energy shows promise for the development of sustainable hydrogen production methods. The process requires a highly active electrocatalyst for oxygen evolution to improve the overall water splitting efficiency. The present study showed that oxygen evolution improved dramatically upon the addition of glycine to cobalt phosphate, when the glycine was added to the electrolyte solution during electrodeposition. The functionality of the organic molecules was investigated using in situ UV-vis absorption, in situ X-ray absorption fine structure, and in situ infrared (IR) absorption spectroscopy in the attenuated total reflection mode. The results demonstrated that the glycine molecules assembled cobalt oxide clusters composed of CoO6 (CoOOH) octahedrons a few nanometers in diameter upon the electrodeposition of cobalt catalysts. This suggests that the cobalt-glycine catalyst can decompose water to oxygen gas efficiently, because the number of cobalt oxide clusters increased as active reaction sites upon the addition of glycine molecules.

In a previous study, we demonstrated that conductive Au nanosheets can be prepared by UV irradiation of an Au nanoparticle monolayer spreading on water. In this study, we applied this UV irradiation technique to inexpensive Ag nanoparticles (NPs) to expand their versatility. UV irradiation of Ag NPs on water resulted in the formation of large Ag NPs and was ineffective for preparing conductive Ag films. The solubilization of additives in the water phase, however, resulted in the conversion of the large Ag NPs into a nanosheet, and the solubilization method was highly effective for preparing transparent conductive Ag films with an optical transmittance of above 70%.

In the present study, carbon-dots (CDs) were derived from the thermal oxidation of an agricultural waste, bitter tea residue, to obtain different sp2/sp3 ratios and electronic structures for metal sensing. The CDs obtained from calcination at 700 °C exhibited the highest photoluminescence (PL) quantum yield (QY) of 11.8% among all the samples treated at different temperatures. These CDs had a high degree of graphitization, which resulted in a strong π-π* electron transition, and hence in a high QY. The strong photoluminescence of the CDs could be used to sense the metal ions Ag+, Sr2+, Fe2+, Fe3+, Co2+, Ni2+, Cu2+, and Sn2+ by monitoring their PL intensity at an excitation wavelength of 320 nm. The metals inhibited the PL intensity in the order Ag+ > Fe2+, Fe3+, Ni2+ > Sr2+, Co2+, Cu2+, Sn2+, which demonstrated that the CDs exhibited high metal ion detection capability and selectivity. The detection of Fe3+ using CDs was performed in the range of 10–100 ppm with a LOD (limit of detection) value of 0.380 ppm. Theoretical calculations demonstrated that Ag+, Sr2+, and Sn2+ induced charge transfer excitation and that Fe2+ and Ni2+ induced d-d transitions via complexation with the sp2 clusters. The charge transfer excitation and d-d transitions hindered the π-π* transition of the sp2 clusters, leading to a quenching effect. On the other hand, Li+, Na+, and K+ ions did not alter the π-π* transition of the sp2 clusters, resulting in a negligible quenching effect. In summary, the oxidation level and electronic structure of CDs derived from bitter tea residue could be tailored, and the CDs were shown to be a facile, sustainable, and eco-friendly material for metal sensing.

A key requirement in developing oxygen evolution reaction (OER) electrocatalysts is increasing their surface area. Herein, we report the design of a hierarchical micro/nanostructured catalyst. Based on polystyrene colloidal template electrodeposition, an ordered microcup array surrounded by nanoflakes was fabricated. The effect of the deposition time on the formation of the catalyst and the corresponding OER performance of the catalyst were investigated using scanning electron microscopy, in situ X-ray absorption fine structure (XAFS) spectroscopy, and electrochemical analysis. The in situ XAFS measurements indicate that the structure of the hierarchical structured catalyst is similar to that of γ-FeOOH. The electrochemical analysis indicates that the hierarchical catalyst has a large surface area and a low charge transfer resistance, which lead to its excellent catalytic performance for the OER. Our study provides new insights in designing high-performance OER catalysts. Moreover, the synthesized hierarchical micro/nanostructured catalyst could be used as a platform for further studies on low-cost iron-based electrocatalysts.

The development of visible-light-driven polymeric g-C3N4 is in response to an emerging demand for the photocatalytic dye degradation and reduction of hexavalent chromium ions. We report the synthesis of g-C3N4 from urea treated with various solvents such as methanol, ethanol, and ethylene glycol. The samples were characterized and the Williamson&ndash, Hall method was applied to investigate the lattice strain of the samples. The activity of the samples was evaluated by observing the degradation of methyl orange and K2Cr2O7 solution under light irradiation. Photocatalytic reaction kinetics were determined as pseudo-first-order and zero-order for the degradation of methyl orange and reduction of hexavalent chromium, respectively. Due to the inhibited charge separation resulting from the small lattice strain, reduced crystal imperfection, and sheet-like structure, g-C3N4 obtained from ethanol-treated urea exhibited the highest activity among the evaluated samples.

In our previous paper, we reported that thermo-responsive emulsions can be prepared based on a long-chain amidoamine derivative (C18AA) and tetraoctylammonium bromide (TOAB), and that the C18AA + TOAB emulsions developed a characteristic interference color in a narrow temperature range. However, the coloration of the original C18AA + TOAB at room temperature exhibited poor brightness. In the present study, we show that the addition of NaOH is effective in both lowering the coloration temperature and improving the brightness of C18AA + TOAB emulsion considerably. Furthermore, we demonstrate that photo-response function can be imparted to C18AA + TOAB iridescent emulsions by introducing a photochromic naphthopyran derivative (Pyran) that reversibly changes from white to yellow upon UV irradiation. The C18AA + TOAB emulsions containing Pyran shows a dual stimuli-responsive iridescent property, and the emulsion color is controllable and reversible through both UV irradiation and temperature.

Surface-modification of polybenzoimidazole (PBI) membrane with chitosan chains has been performed using 4-isocyanato-4′-(3,3′-dimethyl-2,4-dioxo-azetidino)diphenylmethane (IDD) as a coupling agent to build up chemical linkages between the PBI membrane surface and chitosan chains. Incorporation of chitosan chains to PBI membrane surface increases its surface hydrophilicity and enhances its performance of pervaporation dehydration on isopropanol aqueous solutions. The surface chemical structure of the chitosan-modified PBI membrane (PBI-CS) has been characterized with attenuated total reflectance Fourier transform infrared and X-ray photoelectron spectroscopies. The scanning electron micrographs of PBI-CS indicate the surface reaction between PBI and IDD might take place at the top surface of the PBI matrix in a thickness of about 2 μm as the PBI membrane is swollen with the used solvent. PBI-CS is effective for pervaporation dehydration on isopropanol aqueous solutions in a wide concentration range from 30 to 90 wt%. The chitosan layer increases the dissolution rate of water into the PBI-CS membrane so as to simultaneously increase the water permeability and selectivity of the membrane. PBI-CS shows high pervaporation separation indexes which are about 3.9-fold of the value measured with the neat PBI membrane.

Electrochromic materials can change their color under the application of an electrical voltage. The color change accordingly upon charge insertion/extraction, which induce in the material a process of redox reaction. Electrochromic materials are expected to serve an important role in efficient energy applications to control the brightness of light. High optical contrast, fast switching speed, and good cycling durability are required for an electrochromic material to function as a practical material in a device. These properties are influenced by the morphology of the electrochromic film and the associated changes in local ionic diffusion. In this work, we report a facile and cost-efficient preparation of electrochromic materials which are formed by assembly of nano-sized clusters of nickel oxides by electrodeposition integrating amino acids. Electrodeposited films were characterized using Raman spectroscopy, in situ X-ray absorption fine structure spectroscopy, and atomic force microscopy to determine the electronic and structural changes in the films during coloration. These results indicate that the structure of the nickel oxide films in their oxidized state is similar to γ-NiOOH, regardless of kinds of integrated amino acids, although the grain size of the films is dependent on kinds of integrated amino acids. The different grain size results in significant differences in electrochromic performance. The film made of small grain size exhibits the best electrochromic performance. This study demonstrates that a suitable integration of amino acid is essential to enable sustained electrochemical activity, reactive site formation, and functional stability. Figure 1

Poly(3-hexylthiophene) (P3HT) is utilized as a material to enhance the glucose sensing performance of glucose oxidase (GOx) Langmuir-Blodgett (LB) films. To enhance the extensibility and homogeneity of the P3HT in the LB films, octadecylamine (ODA) is introduced. The characteristics of the mixed P3HT/ODA Langmuir monolayers are investigated first and then, utilized as template layers to adsorb GOx from the subphase, preparing P3HT/ODA/GOx Langmuir-Blodgett films for glucose sensing. The results show that P3HT molecules tend to aggregate at the air/liquid interface and, furthermore, the P3HT monolayer has a weak ability to adsorb GOx from the subphase. By using mixed P3HT/ODA monolayer, the presence of ODA not only inhibits the aggregation of P3HT, but also increases the adsorption ability of the monolayer to GOx. The extensibility of P3HT and the homogeneity of the P3HT/ODA monolayers are closely related to the concentration of P3HT/ODA stock solutions. On the glucose sensing experiments, the performance of the P3HT/ODA/GOx LB film is greatly improved due to the presence of P3HT and, furthermore, the sensibility increases with increasing extensibility of P3HT molecules. The best sensitivity achieved for the P3HT/ODA/GOx film is 5.4 μA mM −1 cm −2 which is over two times the value obtained by the ODA/GOx film (2.3 μA mM −1 cm −2 ).

Electrochromism is a phenomenon of reversible color change when an external voltage is applied, causing an electrochemical redox reaction. This interesting property leads to the development of several technological applications, such as electronic papers, rear-view mirrors and smart windows. A typical electrochromic device coating is a multi-layer device consisting of an active electrochromic electrode, a counter electrode, an electrolyte layer separating the two electrodes, and two transparent conducting layers serving as electrical leads. A key requirement in developing an electrochromic electrode is to increase the amount of reaction sites of the electrode. In this work, we report a facile and cost efficient preparation of electrochromic electrode which are formed by assembly of nano-sized clusters of nickel oxides by electrodeposition integrating amino acids. This nanostructured nickel-oxide film with interconnected clusters benefits electrolyte penetration and provide large surface area for charge-transfer reactions. Here, we show that the integration of amino acids resulted in increased nickel-oxide film thickness compared to the system without amino acids. Moreover, the nickel-oxide film also shows a remarkably enhanced electrochromic performance compared to the blank nickel sample. These results demonstrate that the thickness of electrodeposited nickel oxide film thickened with increased reaction site. A three-dimensional (3D) electrochromic material with many reaction sites is achieved. Further, the thickness of electrodeposited nickel oxide film can be tuned by altering kinds of amino acids. Figure 1