Search

Understanding actors’ perceptions of quotas provides an indication of how debate and action relating to board gender composition in Australia may progress. This research investigates actors’ attitudes towards gender quotas for corporate boards in Australia. Semi-structured interviews were undertaken with 27 actors including ASX 200 directors, civil servants, investors, journalists, executive search firms, shareholder, and advocacy organisations. Reflexive thematic analysis was used to analyse the interview data. The research uncovered a stark polarisation between actors “for” and “against” board gender quotas. Quotas remain an emotive topic where actors appear to find reasoned debate and discussion difficult.

Healthcare and disability support services are increasing their efforts towards inclusion and recognising the needs of different groups. This research project was conducted by academic and peer researchers (LGBTIQA+ people with disability) in Victoria, Australia using four focus groups with LGBTIQA+ people with disability. We report on two overarching themes relating to participants’ experiences of accessing health services as LGBTIQA+ people with disability: difficulties in managing multiple identities and the impacts of community services and supports. Participants described having to repeatedly ‘come out’ in a range of ways and contexts as complex and layered processes in which it was difficult to present their full range of needs and experiences to services. We also found that the role of community in promoting a sense of belonging and resilience increased capacity to manage health service use and advocacy. Services and communities aiming to be inclusive to all have the opportunity to recognise and respond to the issues faced by LGBTIQA+ people with disability as a way to pay attention to how overt and subtle practices of discrimination continue to operate despite repeated attempts at or claims of being ‘inclusive.’ Our research suggests actual inclusive, accessible services can be achieved in part through policy and practice that actively responds to the specific needs of LGBTIQA+ people with disability, in addition to LGBTIQA+ education for disability services and disability and accessibility education for LGBTIQA+ focused services. As we do in this article, we argue that this work must be done by prioritising authentic participation of LGBTIQA+ people with disability in the services and research that is about them.

New Phytologist Trust Viruses that infect photoautotrophs have a fundamental relationship with light, given the need for host resources. We investigated the role of light on Coccolithovirus (EhV) infection of the globally distributed coccolithophore, Emiliania huxleyi. Light was required for EhV adsorption, and viral production was highest when host cultures were maintained in continuous light or at irradiance levels of 150–300 µmol m-2 s-1. During the early stages of infection, photosynthetic electron transport remained high, while RuBisCO expression decreased concomitant with an induction of the pentose phosphate pathway, the primary source of de novo nucleotides. A mathematical model developed and fitted to the laboratory data supported the hypothesis that EhV replication was controlled by a trade-off between host nucleotide recycling and de novo synthesis, and that photoperiod and photon flux could toggle this switch. Laboratory results supported field observations that light was the most robust driver of EhV replication within E. huxleyi populations collected across a 2000 nautical mile transect in the North Atlantic. Collectively, these findings demonstrate that light can drive host–virus interactions through a mechanistic interplay between host metabolic processes, which serve to structure infection and phytoplankton mortality in the upper ocean.

This paper studies the role of pre-existing fractures in the damage evolution around tunnel excavation in fractured rocks. The length distribution of natural fractures can be described by a power law model, whose exponent a defines the relative proportion of large and small fractures in the system. The larger a is, the higher proportion of small fractures is. A series of two-dimensional discrete fracture networks (DENs) associated with different length exponent a and fracture intensity P-21 is generated to represent various scenarios of distributed preexisting fractures in the rock. The geomechanical behaviour of the fractured rock embedded with DFN geometry in response to isotropic/anisotropic in-situ stress conditions and excavation-induced perturbations is simulated using the hybrid finite-discrete element method (FEMDEM), which can capture the deformation of intact rocks, the interaction of matrix blocks, the displacement of natural fractures, and the propagation of new cracks. An excavation damaged zone (EDZ) develops around the man-made opening as a result of reactivation of preexisting fractures and propagation of wing cracks. The simulation results show that when a is small, the system which is dominated by large fractures can remain stable after excavation given that P-21 is not very high; however, intensive structurally-governed kinematic instability can occur if P-21 is sufficiently high and the fracture spacing is much smaller than the tunnel size. With the increase of a, the system becomes more dominated by small fractures, and the EDZ is mainly created by the coalescence of small fractures near the tunnel boundary. The results of this study have important implications for designing stable underground openings for radioactive waste repositories as well as other engineering facilities that are intended to generate minimal damage in the host rock mass.

The combined finite-discrete element method (FEMDEM) implemented in Solidity is employed to simulate the effects of geometrical features and loading orientation on the pre- and postfailure behaviour of catalyst supports. In this paper, a comparison with experimental results and a mesh sensitivity analysis for the numerical simulations of uniaxial compression tests on cylindrical pellets are presented and discussed. The structural strength of complex-shaped pellets under simplified loading conditions is investigated with numerical simulations. Some preliminary results that give an insight into the relation between the shape of catalyst supports and their mechanical performance are also presented and discussed.

Coxiella burnetii, the causative agent of Q fever, was first discovered in Australia in 1937. However, little is known about the strains of C. burnetii present in this country. In this study, six published genotyping methods were applied to 42 isolates from Australian patients with acute (n = 39) and chronic (n = 3) Q fever. All the isolates contained the plasmid QpRS and lacked the acute disease antigen A (adaA) gene. Two methods of genotyping based on single nucleotide polymorphisms (SNPs) also failed to discriminate between the isolates. However, results from the method based on SNPs within the multi-spacer sequence typing (MST) loci determined a novel MST genotype, with the Australian isolates forming a unique phylogenetic clade. Multi-locus variable number of tandem repeats (VNTR) analysis (MLVA) determined 14 genotypes, all of which were novel compared with those previously identified in strains from other countries. Many of these were single locus variants, differing from each other at just one of the 15 loci tested. Our results show that the Australian isolates exhibit significant diversity from previously characterised strains, but are genetically closely related to each other, supporting a model of evolution by clonal expansion in a geographically isolated location.

This paper presents a stress-induced variable aperture model to characterise the effect of polyaxial stress conditions on the fluid flow in three-dimensional (3D) persistent fracture networks. Geomechanical modelling of the fractured rock is achieved by the finite-discrete element method (FEMDEM), which can capture deformability of matrix blocks, heterogeneity of stress fields as well as sliding and opening of pre-existing fractures. Propagation of new cracks is not required for this study of persistent fracture systems. The deformed fracture network topologies include details of dilation, opening and closing of fracture apertures, from which the local variations in hydraulic apertures are derived. Stress-controlled distribution of fracture apertures is modelled with both fracture-scale and network-scale effects considered. Under a geomechanical condition with low differential stress ratio, fracture porosity is dominated by the fracture-scale roughness. However, with the increase of stress ratio, some favourably oriented fractures are reactivated for shearing, and matrix blocks are promoted to rotate and generate large openings along their boundaries, which tend to be the key contributors to the aperture field in such persistent systems. The flow behaviour is then considered for these stressed but static solid skeletons and is investigated using a finite element solution to the Laplace problem of single-phase fluid flow. The equivalent permeability tensor of each cube-shaped rock mass is computed based on a series of flow simulations under a macroscopic pressure differential applied at opposite model boundaries with no-flow conditions on the remaining boundaries. Components of the permeability tensor are found to vary more than three orders of magnitude with respect to the change of stress ratio. Large aperture channels formed under a critical stress state accommodate significant localisation features in the flow structure of the network. The results of this study h

Alumina (aluminum oxide, Al2O3) particles are pelletised and fired to produce high porosity catalyst pellets of complex shapes. These pellets fill cylindrical reactor columns with particulate packing structures that are key to the in-service performance, but will suffer breakages which impact on catalyst performance. The combined FiniteDiscrete Element Method (FEMDEM) is ideally suited to the simulation of both the multi-body pellet dynamic packing and quasi-static interactions as well as the stress field of each individual pellet, its deformations and fragmentation. The application of FEMDEM fracture modelling to a fine-grained brittle and porous material is novel. This paper presents a methodology for a validation study through comparison with three pointbending and Brazilian tests and discusses FEMDEM's potential in modelling multi-body fragile systems.