This thesis presents the experimental and numerical analysis of seismic waves that are produced by wind farms. With the aim to develop renewable energies rapidly, the number of wind turbines has been increased in recent years. Ground motions induced by their operation can be observed by seismometers several kilometers away. Hence, the seismic noise level can be significantly increased at the seismic station. Therefore, this study combines long-term experiments and numerical simulations to improve the understanding of the seismic wavefields emitted by complete wind farms and to advance the prediction of signal amplitudes. Firstly, wind-turbine induced signals that are measured at a small wind farm close to Würzburg (Germany) are correlated with the operational data of the turbines. The frequency-dependent decay of signal amplitudes with distance from the wind farm is modeled using an analytical method including the complex effects of interferences of the wavefields produced by the multiple wind turbines. Specific interference patterns significantly affect the wave propagation and therefore the signal amplitude in the far field of a wind farm. Since measurements inside the wind turbines show that the assumption of in-phase vibrating wind turbines is inappropriate, an approach to calculate representative seismic radiation patterns from multiple wind turbines, which allows the prediction of amplitudes in the far field of a complete wind farm, is proposed. In a second study, signals with a frequency of 1.15 Hz, produced by the Weilrod wind farm (north of Frankfurt, Germany) are observed at the seismological observatory TNS (Taunus), which is located at a distance of 11 km from the wind farm. The propagation of the wavefield emitted by the wind farm is numerically modeled in 3D, using the spectral element method. It is shown that topographic effects can cause local signal amplitude reductions, but also signal amplification along the travel path of the seismic wave. The co, Das Innere der Erde wird anhand von seismischen Wellen, die den Erdglobus nach einem Erdbeben durchlaufen, erforscht. Seismische Wellen sind elastische Wellen und transportieren Informationen des Untergrunds an die Erdoberfläche und ermöglichen damit Aussagen zum Aufbau, zur Struktur und Beschaffenheit der Erde auf lokaler und globaler Skala. Mit hochempfindlichen Seismometern lassen sich schon sehr kleine Bodenbewegungen und Deformationsprozesse an der Erdoberfläche nachweisen. Neben Erdbeben oder vulkanischen Prozessen werden Seismometer auch zur globalen Überwachung von Nuklearwaffentests oder zur Erfassung lokaler mikroseismischer Ereignisse, beispielsweise bei geothermischen Kraftwerken oder Aktivitäten in Steinbrüchen, eingesetzt. Aufgrund von wachsenden Bevölkerungszahlen, der Vergrößerung der Städte und der raschen Entwicklung von Verkehrssystemen, Industrie und Technologien zur Energieerzeugung, zeichnen Seismometer nicht nur natürliche Signale, wie z.B. von Erdbeben auf, sondern registrieren auch Schwingungen, die durch die genannten Infrastrukturen verursacht werden - das sogenannte anthropogene seismische Rauschen. Mit dem Ziel, erneuerbare Energien schnell auszubauen, um unabhängig von fossilen Brennstoffen zu werden, nahm die Anzahl der Windenergieanlagen in den letzten Jahrzehnten drastisch zu und wird in Zukunft noch weiter ansteigen. Diese Anlagen werden häufig in abgelegenen windhöffigen Gebieten errichtet, um die Auswirkungen auf die Umwelt zu minimieren und gleichzeitig die Windenergie optimal zu nutzen. Standorte mit ähnlichen Bedingungen werden auch von den Betreibern seismologischer Stationen bevorzugt, da hier das anthropogene seismische Rauschen vermindert auftritt. Windenergieanlagen werden durch den Wind und die darauffolgende Rotation des Rotors in Vibrationen versetzt, welche über das Fundament der Anlage in das Erdreich eingekoppelt werden. Auf diese Weise entstehen Bodenbewegungen, die sich in Form von seismischen Wellen ausbreiten. Vi