Search

Aim of this study was to define sulcal and gyral variations of the lateral parietal cortex and underlying white matter tracts and emphasize the importance of relationship between topographic anatomy of parietal lobe and white matter tracts underlying it in approaches to deep parietal and atrial lesions. Twenty-eight formalin-fixed cerebral hemispheres of 14 adult cadavers were used. Ten hemispheres were dissected from lateral to medial by fiber dissection and all stages were photographed. Our anatomic findings were supported by MRI tractography. Postcentral sulcus and intraparietal sulcus were continuous in most of the cadavers (71% in right, 64% in left side). Intermediate sulcus of Jensen was in bayonet shape in 86 and 50 percent of cadavers at right and left side, respectively. The range of perpendicular distance between the meeting point and interhemispheric fissure was 2.5–4.9 cm in right and 2.8–4.2 cm in left hemisphere whereas the range of distance between meeting point and the sylvian fissure was 3–6 cm and 2.5–5.6 in left and right hemispheres, respectively. When the meeting point was located more laterally, the probability of damaging the arcuate fasciculus and superior longitudinal fasciculus II during dissection was increased. We also found that the intraparietal sulcus and intermediate sulcus of Jensen were associated with the superior longitudinal fasciculus II, middle longitudinal fasciculus, inferior frontooccipital fasciculus, tapetum, and optic radiation. These variations and their relation to subcortical tracts should be considered in atrium and deep parietal lobe surgeries.

Low-energy electron diffraction (LEED) is a widely used technique in surface-science laboratories. Yet, it is rarely used to its full potential. The quantitative information about the surface structure, contained in the modulation of the intensities of the diffracted beams as a function of incident electron energy, LEED I(V), is underutilized. To acquire these data, only minor adjustments would be required in most experimental setups, but existing analysis software is cumbersome to use and often computationally inefficient. The ViPErLEED (Vienna package for Erlangen LEED) project lowers these barriers, introducing a combined solution for user-friendly data acquisition, extraction, and computational analysis. These parts are discussed in three separate publications. Here, the focus is on the computational part of ViPErLEED, which performs highly automated LEED-I(V) calculations and structural optimizations. Minimal user input is required, and the functionality is significantly enhanced compared to existing solutions. Computation is performed by embedding the existing Erlangen tensor-LEED package (TensErLEED). ViPErLEED manages additional parallelization, monitors convergence, and processes all input and output. This makes LEED I(V) more accessible to new users while minimizing the potential for errors and the manual labor. Added functionalities include intelligent structure-dependent defaults for most calculation parameters, automatic detection of bulk and surface symmetries and their relationship, automated search procedures that preserve the symmetry and speed up convergence, adjustments to the TensErLEED code to handle larger systems than before, as well as parallelization and optimization. Modern file formats are used as input and output, and there is a direct interface to the atomic simulation environment (ASE) package. The software is implemented primarily in Python (version ≥3.7) and provided as an open-source package (GNU GPLv3 or any later version). A structure determination of the α-Fe_{2}O_{3}(11[over ¯]02)-(1×1) surface is presented as an example for the application of the software.

As part of the Vienna package for Erlangen LEED, low-energy electron diffraction (ViPErLEED) project, computer programs have been developed for facile and user-friendly data extraction from movies of LEED images. The programs make use of some concepts from astronomical image processing and analysis. As a first step, flat-field and dark-frame corrections reduce the effects of inhomogeneities of the camera and screen. In a second step, for identifying all diffraction maxima (“spots”), it is sufficient to manually mark and label a single spot or very few spots. Then the program can automatically identify all other spots and determine the distortions of the image. This forms the basis for automatic spot tracking (i.e., following the spots as they move across the LEED screen) and intensity measurement. Even for complex structures with hundreds to a few thousand diffraction beams, this step takes less than a minute. The package also includes a program for further processing of these I(V) curves (averaging of equivalent beams, manual and/or automatic selection, smoothing) as well as several utilities. The software is implemented as a set of plugins for the public-domain image processing program ImageJ and provided as an open-source package.

Aim of this study was to define sulcal and gyral variations of the lateral parietal cortex and underlying white matter tracts and emphasize the importance of relationship between topographic anatomy of parietal lobe and white matter tracts underlying it in approaches to deep parietal and atrial lesions. Twenty- eight formalin-fixed cerebral hemispheres of 14 adult cadavers were used. Ten hemispheres were dissected from lateral to medial by fiber dissection and all stages were photographed. Our anatomic findings were supported by MRI tractography. Postcentral sulcus and intraparietal sulcus were continuous in most of the cadavers (71% in right, 64% in left side). Intermediate sulcus of Jensen was in bayonet shape in 86 and 50 percent of cadavers at right and left side, respectively. The range of perpendicular distance between the meeting point and interhemispheric fissure was 2.5-4.9 cm in right and 2.8-4.2 cm in left hemisphere whereas the range of distance between meeting point and the sylvian fissure was 3-6 cm and 2.5-5.6 in left and right hemispheres, respectively. When the meeting point was located more laterally, the probability of damaging the arcuate fasciculus and superior longitudinal fasciculus II during dissection was increased. We also found that the intraparietal sulcus and intermediate sulcus of Jensen were associated with the superior longitudinal fasciculus II, middle longitudinal fasciculus, inferior frontooccipital fasciculus, tapetum, and optic radiation. These variations and their relation to subcortical tracts should be considered in atrium and deep parietal lobe surgeries. [ABSTRACT FROM AUTHOR]

Abstract Background Branched-chain amino acids (BCAAs) are synthesized by plants, fungi, bacteria, and archaea with plants being the major source of these amino acids in animal diets. Acetolactate synthase (ALS) is the first enzyme in the BCAA synthesis pathway. Although the functional contribution of ALS to BCAA biosynthesis has been extensively characterized, a comprehensive understanding of the regulation of this pathway at the molecular level is still lacking. Results To characterize the regulatory processes governing ALS activity we utilized several complementary approaches. Using the ALS catalytic protein subunit as bait we performed a yeast two-hybrid (Y2H) screen which resulted in the identification of a set of interacting proteins, two of which (denoted as ALS-INTERACTING PROTEIN1 and 3 [AIP1 and AIP3, respectively]) were found to be evolutionarily conserved orthologues of bacterial feedback-regulatory proteins and therefore implicated in the regulation of ALS activity. To investigate the molecular role AIPs might play in BCAA synthesis in Arabidopsis thaliana, we examined the functional contribution of aip1 and aip3 knockout alleles to plant patterning and development and BCAA synthesis under various growth conditions. Loss-of-function genetic backgrounds involving these two genes exhibited differential aberrant growth responses in valine-, isoleucine-, and sodium chloride-supplemented media. While BCAA synthesis is believed to be localized to the chloroplast, both AIP1 and AIP3 were found to localize to the peroxisome in addition to the chloroplast. Analysis of free amino acid pools in the mutant backgrounds revealed that they differ in the absolute amount of individual BCAAs accumulated and exhibit elevated levels of BCAAs in leaf tissues. Despite the phenotypic differences observed in aip1 and aip3 backgrounds, functional redundancy between these loci was suggested by the finding that aip1/aip3 double knockout mutants are severely developmentally compromised. Conclusions Taken together the data suggests that the two regulatory proteins, in conjunction with ALS, have overlapping but distinct functions in BCAA synthesis, and also play a role in pathways unrelated to BCAA synthesis such as sodium-ion homeostasis, extending to broader aspects of patterning and development.

The Chloroplast 2010 Project (http://www.plastid.msu.edu/) identified and phenotypically characterized homozygous mutants in over three thousand genes, the majority of which encode plastid-targeted proteins. Despite extensive screening by the community, no homozygous mutant alleles were available for several hundred genes, suggesting that these might be enriched for genes of essential function. Attempts were made to generate homozygotes in ~1200 of these lines and 521 of the homozygous viable lines obtained were deposited in the Arabidopsis Biological Resource Center (http://abrc.osu.edu/). Lines that did not yield a homozygote in soil were tested as potentially homozygous lethal due to defects either in seed or seedling development. Mutants were characterized at four stages of development: developing seed, mature seed, at germination, and developing seedlings. To distinguish seed development or seed pigment-defective mutants from seedling development mutants, development of seeds was assayed in siliques from heterozygous plants. Segregating seeds from heterozygous parents were sown on supplemented media in an attempt to rescue homozygous seedlings that could not germinate or survive in soil. Growth of segregating seeds in air and air enriched to 0.3% carbon dioxide was compared to discover mutants potentially impaired in photorespiration or otherwise responsive to CO2 supplementation. Chlorophyll fluorescence measurements identified CO2-responsive mutants with altered photosynthetic parameters. Examples of genes with a viable mutant allele and one or more putative homozygous-lethal alleles were documented. RT-PCR of homozygotes for potentially weak alleles revealed that essential genes may remain undiscovered because of the lack of a true null mutant allele. This work revealed 33 genes with two or more lethal alleles and 73 genes whose essentiality was not confirmed with an independent lethal mutation, although in some cases second leaky alleles were identified.

This paper deals with the formulation of a frequency domain modal analysis technique that is applicable to weakly non-linear multi-degree of freedom (MDOF) systems with well-separated modes. The concept of linear modal superposition is combined with the normal non-linear mode technique, an approach that allows the formulation of a system identification procedure in terms of variable modal parameters. The numerical study was focused on a 4-DOF system with cubic stiffness non-linearity, and the modal parameters were obtained as functions of the modal amplitude. It was shown that the methodology was well suited to the study of practical cases for which the underlying linear model may be approximate. Similarly, the technique was found to be robust in the presence of measurement noise, though some adverse effects were observed for high noise levels. Once the variable modal parameters were extracted at some given force level, the non-linear responses were predicted at other force levels via synthesis of normal non-linear modes. The same responses were also obtained using a harmonic balance approach and very good agreement was obtained between the two sets of results. The procedure is well suited to the study of industrial cases because of its compatibility with existing finite element methods and linear modal analysis techniques.

The purpose of Part II is to provide an experimental validation of the methodology presented in Part I and to consider a representative engineering case, the study of which requires a relatively large numerical model. A beam system with cubic stiffness type non-linearity was used in the experimental study. The non-linear response was measured at three locations and the underlying linear system was obtained via linear modal analysis of low-excitation response data. The non-linear parameter variations were obtained as a function of the modal amplitude and the response of the system was generated for other force levels. The results were found to agree very well with the corresponding measurements, indicating the success of the non-linear modal analysis methodology, even in the presence of true experimental noise. An advanced numerical case study that included both inherent structural damping and non-linear friction damping, was considered next. The linear finite element model of a high-pressure turbine blade was used in conjunction with three local non-linear friction damper elements. It was shown that the response of the system could be predicted at any force level, provided that that non-linear modal parameters were available at some reference force level. The predicted response levels were compared against those obtained from reference simulations and very good agreement was achieved in all cases.

This article deals with an extended application of the constrained eigenstructure assignment method (CEAM) to finite element model updating. The existing formulation is modified to accommodate larger systems by developing a quadratic linear optimization procedure that is unconditionally stable. Further refinements include the updating of the mass matrix, a hysteretic damping model, and the introduction of elemental correction factors. Six numerical test cases, dealing with effects of damping and measurement noise, mode shape incompleteness, and discretization differences, were conducted in the case of a 3-D frame model with 114 coordinates. The performance of the CEAM was evaluated systematically for both the purpose of error location and the global correction of the initial model. The same cases were also studied using another model updating approach, namely the response function method (RFM). It was found that the CEAM had a number of distinct advantages, such as yielding a noniterative direct solution, requiring much less computing power, and providing acceptable results for cases, that could not he handled using the RFM.

This article summarizes the basic formulation of two well-established finite element model (FEM) updating techniques for improved dynamic analysis, namely the response function method (RFM) and the inverse eigensensitivity method (IESM). Emphasis is placed on the similarities in their mathematical formulation, numerical treatment, and on the uniqueness of the resulting updated models. Three case studies that include welded L-plate specimens, a car exhaust system, and a highway bridge were examined in some detail and measured vibration data were used throughout the investigation. It was experimentally observed that significant dynamic behavior discrepancies existed between some of the nominally identical structures, a feature that makes the task of model updating even more difficult because no unequivocal reference data exist in this particular case. Although significant improvements were obtained in all cases where the updating of the FE model was possible, it was found that the success of the updated models depended very heavily on the parameters used, such as the selection and number of the frequency points for RFM, and the selection of modes and the balancing of the sensitivity matrix for IESM. Finally, the performance of the two methods was compared from general applicability, numerical stability, and computational effort standpoints.

In the latter part of the 20th century, remarkable developments in new dental materials and technologies were achieved. However, regarding the impact of dental resin-based materials 3D-printed on cellular responses, there have been a limited number of published studies recently. The biocompatibility of dental restorative materials is a controversial topic, especially when discussing modern manufacturing technologies. Three-dimensional printing generates the release of residual monomers due to incomplete polymerization of materials and involves the use of potentially toxic substances in post-printing processes that cannot be completely eliminated. Considering the issue of biocompatibility, this article aims to establish an overview of this aspect, summarizing the different types of biocompatibility tests performed on materials used in 3D printing in dentistry. In order to create this comprehensive review, articles dealing with the issue of 3D printing in dentistry were analysed by accessing the main specialized search engines using specific keywords. Relevant data referring to types of materials used in 3DP to manufacture various dental devices, polymerization methods, factors affecting monomer release, cytotoxicity of unreacted products or post-curing treatments, and methods for assessing biocompatibility were analysed. Although the introduction of new restorative materials used in dental treatments is subject to national and international regulations and standards, it is necessary to investigate them regarding biocompatibility in order to support or deny the manufacturers' statements regarding this aspect.

Periimplantitis represents an inflammatory disease of the soft and hard tissues surrounding the osseointegrated dental implant, triggering progressive damage to the alveolar bone. Cumulative data have revealed that periimplantitis plays a crucial part in implant failure. Due to the strategic roles of autophagy and its upstream coordinator, the AKT/mTOR pathway, in inflammatory responses, the crosstalk between them in the context of periimplantitis should become a key research target, as it opens up an area of interesting data with clinical significance. Therefore, in this article, we aimed to briefly review the existing data concerning the complex roles played by ROS in the interplay between the AKT/mTOR signaling pathway and autophagy in periimplantitis, in each of the main cell types involved in periimplantitis pathogenesis and evolution. Knowing how to modulate specifically the autophagic machinery in each of the cellular types involved in the healing and osseointegration steps post implant surgery can help the clinician to make the most appropriate post-surgery decisions. These decisions might be crucial in order to prevent the occurrence of periimplantitis and ensure the proper conditions for effective osseointegration, depending on patients' clinical particularities.

Game meat is derived from non-domesticated, free-ranging wild animals and plays an important role in human nutrition, but it is recognized as a source of food-borne and drug-resistant pathogens impacting food safety. The present review aimed to provide a comprehensive analysis of the frequency of isolation and antimicrobial resistance (AMR) profiles of major foodborne pathogens from the Enterobacteriaceae , including Salmonella , Escherichia , and Yersinia genera, in wild ungulates, across Europe in the 21st century. A systematic search was conducted via the Google Scholar database using the PRISMA guidelines. In this regard, the content of a total of 52 relevant scientific publications from both European Union (n = 10) and non-European Union countries (n = 3) was processed, highlighting the main scientific achievements and indicating knowledge gaps and future perspectives. The studies highlighted that Salmonella spp. was the most commonly encountered pathogen, and significant AMR levels were noticed for the isolated strains, especially against penicillin (32.8%) and amoxicillin (32.1%). This review underscores the importance of monitoring the presence of food-borne pathogens and their AMR in wildlife as important public health and food safety concerns.

Babesia caballi is a tick-borne hemoparasite that causes equine piroplasmosis. It has a significant economic impact, decreasing performance and affecting animal welfare. This study aimed to identify B. caballi DNA in the blood of horses from households in the southwestern and western regions of Romania. We included 310 animals, from which blood was collected via EDTA. To test the samples for the B. caballi parasite genome, we used real-time PCR and conventional PCR. The prevalence of B. caballi was 5.81% (18/310) in apparently healthy horses, suggesting that this parasite is enzootic in the regions studied, although veterinarians did not indicate any symptoms resembling clinical babesiosis. In Romania, there are insufficient epidemiologic data on equine babesiosis, and the results of the present study suggest the need for further investigations into the dynamics of transmission and to identify potential prevention and control strategies.

This study investigated the bacteriological quality of raw ovine milk produced by farms located in the Banat region of Romania. Additionally, the pathogenic potential and antimicrobial resistance of the isolated Escherichia coli strains were evaluated. A total of 95.8% (69/72) of the screened bulk tank milk samples, collected at the farm level immediately after milking, demonstrated appropriate total aerobic mesophilic bacteria (TMB) counts, varying from 3.32 to 6.09 log10 CFU/mL. However, 4.2% (3/72) of the samples were above the regulatory limit of 6.18 log10 CFU/mL. E. coli was identified in 66.6% of the examined samples, and from the total number ( n = 48) of isolates, 18.8% harbored the stx 2 gene, highlighting pathogenic potential. Antimicrobial susceptibility testing with the Vitek2 system of the isolated E. coli strains revealed resistance against ampicillin (45.8%), gentamicin (20.8%), ticarcillin-clavulanic acid (18.8%), cephalexin (18.8%), amoxicillin-clavulanic acid (8.3%), and trimethoprim-sulfamethoxazole (2.1%). Additionally, 64.6% of the strains showed intermediate resistance against amoxicillin-clavulanic acid, while no resistance was recorded against imipenem. Five (18.5%) strains were multidrug-resistant. This study's results underline hygienic sanitary deficiencies during the milking phase and indicate that raw ovine milk can be contaminated with pathogenic and multidrug-resistant E. coli strains, highlighting a potential risk to public health. Further studies are encouraged to better understand the risk posed to the consumer via the consumption of ovine milk and derived products.

In contemporary dentistry, several 3D printing techniques, including a stereolithography apparatus (SLA), digital light processing (DLP), liquid crystal display (LCD), and PolyJet 3D inkjet printing technology (PolyJet), are employed for model production. Despite their widespread use, there remains a paucity of the literature regarding the trueness and precision of these devices in dental applications. Existing studies comparing the accuracy of dental models manufactured by different printing technologies yield disparate conclusions regarding dental prosthesis manufacturing. This study aimed to test two null hypotheses: first, that the trueness of various new-generation 3D printers is equivalent, and second, that the trueness of printing by these printers is sufficient for achieving high-precision mastercasts in dental prosthodontics manufacturing. The research focuses on evaluating the trueness of five contemporary dental 3D printers: Anycubic Mono X 6Ks (Hongkong Anycubic Technology Co., Hongkong, China), Asiga Max (Asiga, Sydney, Australia), Creo C5 (Planmeca Oy, Helsinki, Finland), Form 3B (Formlabs, Boston, MA, USA), and J5 Dentajet (Stratasys Ltd., Eden Prairie, MN, USA). The methodology employed involved the creation of a digital test object using Blender software, adhering meticulously to the dimensions outlined in ISO standard 20896-1. These dimensions were chosen to be both relevant for this study and representative of clinical scenarios. Subsequently, the test object was printed and precise measurements were conducted utilizing a metrology-type Nikon XTH225 ST Reflection target in conjunction with VGStudio MAX analysis software. The results of our investigation revealed clinically negligible deviations in ball dimensions across all printers, with the maximum observed deviations ranging between 1.17% and 2.03% (notably observed in the Creo C5 printer). Transversal distortion exhibited variance based on the linear accuracy of each printer, with Stratasys21 and Formlabs 3B demonstrating superior accuracy among the evaluated printers. Distortions in the analyzed dimensions (specifically, anterior b-c, posterior a-d, and oblique a-c) were found to be uniform. In conclusion, while the first null hypothesis was rejected, indicating variations in trueness among the 3D printers assessed, our findings affirm the suitability of all five analyzed 3D printers for clinical applications. Consequently, these printers can be utilized for the fabrication of high-precision mastercasts in dental prosthodontics manufacturing.

Parasitism by protozoa and monogenean flatworms in freshwater fish from Romania was studied by collecting and examining samples from two major river systems there: 183 fish from 17 species from the Olt River and its tributaries; and 155 fish from 16 species from the Mureș River and its tributary, Târnava Mare. The average rates of parasitism in the samples from the two rivers and their tributaries were as follows: Ichthyiophthirius multifiliis (2%), Trichodina spp. (21%), Apiosoma spp. (18%), Mixobolus spp. (8%), Dactylogyrus spp. (9%), and Gyrodactylus spp. (10%). The number of parasite species varied from one river to another. I. multifiliis was found in only 3 fish species, Trichodina spp. in 13 species, Glosatella spp. in 6 species, and Mixobollus spp., Dactylogyrus spp., and Gyrodactylus spp. in 7 different species each. The highest number of parasite species (six) were identified in the European chub ( Squalius cephalus ) and schneider ( Alburnoides bipunctatus ), which seem more susceptible to parasitic infections. The aquatic environment of these rivers may represent a source of parasites for fish from neighboring countries through which these rivers pass.

(1) Background: Intraoral scanners undergo rapid advancements in hardware and software, prompting frequent updates by manufacturers. (2) Aim: This study aimed to quantitatively assess the precision of full dental arch digital impressions obtained from four different intraoral scanners: Trios 5-3SHAPE, Copenhagen, Denmark, CEREC Primescan- Dentsply Sirona, New York, NY, USA, Planmeca Emerald S-Planmeca Oy, Helsinki, Finland, and Medit i700-Medit Corp, Seoul, Republic of Korea. (3) Methods: A maxillary virtual dental model (digital master model) was created in accordance with ISO standard 20896-1. Subsequently, a 3D-printed model was obtained from the master model's STL file and scanned 15 times consecutively with each scanner. STL files were aligned with the master model's STL using Medit Link-Medit Design software v.3.1.0. The accuracy was evaluated by measuring deviations in micrometers between each scanner's scans and the master model. (4) Results: The study revealed variations in accuracy ranging from 23 to 32 µm across scans of the same dental arch, irrespective of the scanner used and scanning strategy employed. The anterior regions exhibited higher precision (Mean Absolute Deviation of 112 µm) compared to the posterior regions (Mean Absolute Deviation of 127 µm). Trios 5 demonstrated the smallest deviation (average 112 µm), indicating superior accuracy among the scanners tested. Emerald S and Medit i700 exhibited balanced performance (average 117 µm and 114 µm, respectively), while Primescan consistently displayed high deviation (average 127 µm). (5) Conclusions: Based on clinically accepted thresholds for accuracy in intraoral scanning, which are typically 200 µm for full arch scans, Trios 5 surpasses these benchmarks with its average deviation falling within the 200 µm range. Emerald S and Medit i700 also meet these standards, while Primescan, although showing high overall deviation, approaches the upper limit of clinical acceptability. Considering the limitations of an in vitro investigation, the findings demonstrate that each intraoral scanner under evaluation is capable of reliably and consistently capturing a full arch scan for dentate patients.

Computer-aided design and computer-aided manufacturing (CAD/CAM) techniques are based on either subtractive (milling prefabricated blocks) or additive (3D printing) methods, and both are used for obtaining dentistry materials. Our in vitro study aimed to investigate the behavior of human gingival fibroblasts exposed to methacrylate (MA)-based CAD/CAM milled samples in comparison with that of MA-based 3D-printed samples to better elucidate the mechanisms of cell adaptability and survival. The proliferation of human gingival fibroblasts was measured after 2 and 24 h of incubation in the presence of these samples using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, and the membrane integrity was assessed through the lactate dehydrogenase release. The level of reactive oxygen species, expression of autophagy-related protein LC3B-I, and detection of GSH and caspase 3/7 were evaluated by fluorescence staining. The MMP-2 levels were measured using a Milliplex MAP kit. The incubation with MA-based 3D-printed samples significantly reduced the viability, by 16% and 28% from control after 2 and 24 h, respectively. There was a 25% and 55% decrease in the GSH level from control after 24 h of incubation with the CAD/CAM milled and 3D-printed samples, respectively. In addition, higher levels of LC3B-I and MMP-2 were obtained after 24 h of incubation with the MA-based 3D samples compared to the CAD/CAM milled ones. Therefore, our results outline that the MA-CAD/CAM milled samples displayed good biocompatibility during 24-h exposure, while MA-3D resins are proper for short-term utilization (less than 24 h).

Introduction: Assessment of the denture plaque can provide a valuable report regarding the oral health of geriatric patients and the oral hygiene habits in this population group. Focusing on the current research gap on this topic in Romania, our research aims to highlight the microbial plaque on the different surfaces and types of removable poly(methyl methacrylate) (PMMA) prostheses to qualitatively evaluate the microbial species, and to assess the combined effect of mechanical and chemical cleaning of dentures on the prosthetic microbiome., Methods: The prosthetic plaque from four denture wearers was identified with a UV activated fluorescent revealer and digitally photographed. Swab samples according to a certain hygiene protocol were cultured on three different growth media such as blood agar (BA), bromothymol blue lactose agar (AABTL) and Sabouraud dextrose agar (SDA)., Results: Denture plaque was variably distributed on the surface of the prostheses. Regardless of the denture type (conventional complete denture, tooth or implant supported overdenture, removable partial denture) the microbial plaque was identified at the retentive areas, especially at interdental spaces. The main plaque deposition areas were the vestibular incline of the labial flange of the maxillary denture and the lingual incline of the posterior lingual flange of the mandibular denture. The prosthetic microbiome consisted of pathogenic Gram-positive aerobes (Streptococcus spp. and coagulase-negative Staphylococcus spp.), Gram-positive anaerobes (Actinomyces spp. and Klebsiella spp.) as well as subspecies of fungi of the genus Candida ., Conclusions: Despite its poor variety, the denture microbiome in the investigated cases hosts colonies with high pathogenic potential. Some areas of the prostheses are more likely to accumulate dental plaque. Dentists should insist through more regular checks of the patients and their caregivers on ensuring the biocontrol of the dentures, especially in frail geriatric patients exposed to greater risks related to general health., Competing Interests: Conflicts of interest: All authors – none to declare., (GERMS.)

Fascioloidosis is a parasitic disease of primary wild and domestic ruminants, caused by giant liver fluke, Fascioloides magna . The definitive host of the liver fluke in its area of origin (North America) is the white-tailed deer ( Odocoileus virginianus ). In Europe, the red deer ( Cervus elaphus ) and European fallow deer ( Dama dama ) are definitive hosts and the most sensitive hosts to F. magna infection, on which the parasite exerts serious pathogenic effects. In this study, we analyzed fecal samples and livers of 72 D. dama from 11 hunting grounds in Arad County, Romania. Of the 72 fecal samples and livers from D. dama , trematodes of the genus Fascioloides were identified in four (5.56%). Sequencing revealed that the trematodes identified in the samples were similar to the sequence of F. magna (GenBank no. EF534992.1, DQ683545.1, KU232369.1). The sequence obtained from the molecular analysis has been deposited in GenBank ® under accession number OQ689976.1. This study describes the first report of giant liver fluke ( F. magna ) infection in D. dama in Romania.

Due to its adaptive versatility to numerous types of habitats, extremely diverse both in terms of composition and specificity, developed in various areas of the Western Plains of Romania, the European fallow deer ( Dama dama ) is a species with high ecological plasticity. In this area, the D. dama interacts with other species of wild fauna but also with numerous domestic animals, an important aspect in terms of the sanitary-veterinary status of animal populations, as well as the existence of a potential risk of infection with various species of parasites that can cause the D. dama specimens to obtain certain diseases and even zoonoses. A total of 133 esophagi from D. dama have been examined for helminths. Of the 133 esophagus samples from D. dama , nematodes of the genus Gongylonema were identified in 25 (18.80%). Sequencing revealed that the nematode identified in the samples was 99% similar to the sequence of Gongylonema pulchrum (GenBank no. LC026018.1, LC388754.1, AB646061). The present research is the first report of the nematode G. pulchrum from D. dama in Romania.

Dental pathologies of endodontic origin are varied in nature, and include infectious and non-infectious causes. Through this review, we aim to provide a deeper understanding of the role of bacterial involvement and in the pathogenesis of endodontic pathologies, by reviewing the relevant literature on the most common bacterial species involved, and their capacity to organize as biofilms. Furthermore, we focus on the most important recent updates in the management of endodontic infections, from a multidisciplinary perspective., Competing Interests: Conflicts of interest: All authors – none to declare., (GERMS.)

The present study was carried out to valorize the Opuntia ficus-indica (OFI) by-products by extracting and identifying their biochemical compounds and evaluating their antioxidant potential by in vitro activities (DPPH radical and FRAP), as well as their capacity to stabilize margarine oxidation (rancimat test). In addition, their in vitro anticoccidial effect on the destruction of Eimeria oocysts isolated from naturally infected chickens was also targeted. Microwaves and response surface methodology tools were used to extract the maximum amount of phenolic compounds (42.05 ± 0.46 GAE mg/g DW of total phenolic compounds in 90 s at 400 watts). Moreover, the effect of extraction factors was also studied. Eight phenolic compounds, including isorhamnetin, dihydrokaempferol, and kaempferol-3-O-rutinoside, were identified. The findings confirmed that OFI peel extract has strong antioxidant activities (DPPH radical, ferric reducing power). The rancimat test shows that OFI peel extract improves margarine stability by 3.2 h. Moreover, it has a notable destruction rate of Eimeria oocysts (30.06 ± 0.51%, LC 50 : 60.53 ± 0.38 mg/mL). The present investigation offers promise for the reuse of food waste as natural margarine additives, protection of the environment, and substitution of anticoccidial synthetic treatments.