Search

Abstract Background Questions regarding the distribution of stress in the proximal human femur have never been adequately resolved. Traditionally, by considering the femur in isolation, it has been believed that the effect of body weight on the projecting neck and head places the superior aspect of the neck in tension. A minority view has proposed that this region is in compression because of muscular forces pulling the femur into the pelvis. Little has been done to study stress distributions in the proximal femur. We hypothesise that under physiological loading the majority of the proximal femur is in compression and that the internal trabecular structure functions as an arch, transferring compressive stresses to the femoral shaft. Methods To demonstrate the principle, we have developed a 2D finite element model of the femur in which body weight, a representation of the pelvis, and ligamentous forces were included. The regions of higher trabecular bone density in the proximal femur (the principal trabecular systems) were assigned a higher modulus than the surrounding trabecular bone. Two-legged and one-legged stances, the latter including an abductor force, were investigated. Results The inclusion of ligamentous forces in two-legged stance generated compressive stresses in the proximal femur. The increased modulus in areas of greater structural density focuses the stresses through the arch-like internal structure. Including an abductor muscle force in simulated one-legged stance also produced compression, but with a different distribution. Conclusion This 2D model shows, in principle, that including ligamentous and muscular forces has the effect of generating compressive stresses across most of the proximal femur. The arch-like trabecular structure transmits the compressive loads to the shaft. The greater strength of bone in compression than in tension is then used to advantage. These results support the hypothesis presented. If correct, a better understanding of the stress distribution in the proximal femur may lead to improvements in prosthetic devices and an appreciation of the effects of various surgical procedures affecting load transmission across the hip.

Background: Experimental results are commonly fitted by determining parameter values of suitable mathematical expressions. In case a relation exists between different data sets, the accuracy of the parameters obtained can be increased by incorporating this relationship in the fitting process instead of fitting the recordings separately. Methods: An algorithm to fit multiple measured curves simultaneously was developed. The method accounts for parameters that are shared by some curves. It can be applied to either linear or nonlinear equations. Simulated noisy "measurement results" were created to compare the introduced method to the "straight forward" way of fitting the curves separately. Results: The analysis of the simulated measurements confirm, that the introduced method yields more accurate parameters compared to the ones gained by fitting the measurements separately. Therefore it needs more computer time. As an example, the new fitting algorithm is applied to the measurements of the evoked compound action potentials (ECAP) of the auditory nerve: This leads to promising ideas to reduce artefacts generated by the measuring process. Conclusion: The introduced fitting algorithm uses the relationship between multiple measurement results to increase the accuracy of the parameters. Its application in the field of ECAP measurements is promising and should be further investigated. [ABSTRACT FROM AUTHOR]

The development of automatic methods for segmenting anatomy from medical images is an important goal for many medical and healthcare research areas. Datasets that can be used to train and test computer algorithms, however, are often small due to the difficulties in obtaining experts to segment enough examples. Citizen science provides a potential solution to this problem but the feasibility of using the public to identify and segment anatomy in a medical image has not been investigated. Our study therefore aimed to explore the feasibility, in terms of performance and motivation, of using citizens for such purposes. Public involvement was woven into the study design and evaluation. Twenty-nine citizens were recruited and, after brief training, asked to segment the spine from a dataset of 150 magnetic resonance images. Participants segmented as many images as they could within three one-hour sessions. Their accuracy was evaluated by comparing them, as individuals and as a combined consensus, to the segmentations of three experts. Questionnaires and a focus group were used to determine the citizens' motivation for taking part and their experience of the study. Citizen segmentation accuracy, in terms of agreement with the expert consensus segmentation, varied considerably between individual citizens. The citizen consensus, however, was close to the expert consensus, indicating that when pooled, citizens may be able to replace or supplement experts for generating large image datasets. Personal interest and a desire to help were the two most common reasons for taking part in the study., Competing Interests: The authors have declared that no competing interests exist.

Objective: Lifting postures are frequently implicated in back pain. We previously related responses to a static load with intrinsic spine shape, and here we investigate the role of lumbar spine shape in lifting kinematics., Methods: Thirty healthy adults (18-65 years) performed freestyle , stoop and squat lifts with a weighted box (6-15 kg, self-selected) while being recorded by Vicon motion capture. Internal spine shape was characterised using statistical shape modelling (SSM) from standing mid-sagittal MRIs. Associations were investigated between spine shapes quantified by SSM and peak flexion angles., Results: Two SSM modes described variations in overall lumbar curvature (mode 1 (M1), 55% variance) and the evenness of curvature distribution (mode 2 (M2), 12% variance). M1 was associated with greater peak pelvis (r=0.38, p=0.04) and smaller knee flexion (r=-0.40, p=0.03) angles; individuals with greater curviness preferred to lift with a stooped lifting posture. This was confirmed by analysis of those individuals with very curvy or very straight spines (|M1|>1 SD). There were no associations between peak flexion angles and mode scores in stoop or squat trials (p>0.05). Peak flexion angles were positively correlated between freestyle and squat trials but not between freestyle and stoop or squat and stoop , indicating that individuals adjusted knee flexion while maintaining their preferred range of lumbar flexion and that 'squatters' adapted better to different techniques than 'stoopers'., Conclusion: Spinal curvature affects preferred lifting styles, and individuals with curvier spines adapt more easily to different lifting techniques. Lifting tasks may need to be tailored to an individual's lumbar spine shape., Competing Interests: Competing interests: None declared.

Objectives: The current study was designed to explore the associations between L-arginine metabolites and muscle mass and function in old age, which are largely unknown., Design: The study used a randomised, double-blind, placebo-controlled design., Setting: The study was carried out in a laboratory setting., Participants: 50 healthy older adults [median age 70 years (IQR 67-73); 27 males]., Intervention: Participants undertook an 18-week resistance exercise program, and a nutritional intervention (fish oil vs. placebo)., Measurements: Serum homoarginine, ornithine, citrulline, asymmetric dimethylarginine (ADMA), NG-monomethyl-L-arginine (L-NMMA), and symmetric dimethylarginine (SDMA), maximal voluntary contraction (MVC) and isokinetic torque of the knee extensors at 30° s-1 (MIT), muscle cross sectional area (MCSA) and quality (MQ) were measured at baseline and after the intervention., Results: No significant exercise-induced changes were observed in metabolite concentrations. There were significant sex differences in the associations between metabolites and muscle parameters. After adjusting for age, glomerular filtration rate and fish oil intervention, citrulline (P=0.002) and ornithine (P=0.022) were negatively associated with MCSA at baseline in males but not females. However, baseline citrulline was negatively correlated with exercise-induced changes in MVC (P=0.043) and MQ (P=0.026) amongst females. Furthermore, amongst males, baseline homoarginine was positively associated with exercise-induced changes in MVC (P=0.026), ADMA was negatively associated with changes in MIT (P=0.026), L-NMMA (p=0.048) and ornithine (P<0.001) were both positively associated with changes in MCSA, and ornithine was negatively associated with changes in MQ (P=0.039)., Conclusion: Therefore, barring citrulline, there are significant sex differences in the associations between L-arginine metabolites and muscle mass and function in healthy older adults. These metabolites might enhance sarcopenia risk stratification, and the success of exercise programs, in old age., Competing Interests: The authors do not have any conflicts of interest to declare.

Needle puncture of the intervertebral disc can initiate a mechanical and biochemical cascade leading to disc degeneration. Puncture's mechanical effects have been shown near the puncture site, mechanical effects should be observed far, relative to needle size, from the puncture site, given the disc-wide damage induced by the stab. The aim of this work was to quantify these far-field effects, and to observe the local structural damage provoked by the needle. Strips of cow tail annulus fibrosus underwent two consecutive mechanical loadings to 5% tensile strain; fifteen samples were punctured in a radial direction with a randomly assigned needle between the two loadings (needle gauges between 19 and 23). Ten samples (control group) were not punctured. During loading, the tissue strains were imaged using second harmonic generation microscopy in a <600×800µm region about 4.4mm from the puncture site. After mechanical testing, the puncture site was imaged in 3D. Puncture had no significant effect on annulus elastic modulus. Imaging showed a modest change in the shearing between fibre bundles however, the linear strain between bundles, intra-bundle shear and linear strain were not significantly affected. At the puncture site, detached lumps of tissue were present. These results suggest that the mechanical effects observed in intact discs are due to the depressurization of the disc, rather than the local damage to the annulus. Needle profiles could be designed, aiming at separating fibre bundles rather than cutting through them, to avoid leaving dying tissue behind., Statement of Significance: Needle puncture of the intervertebral disc can initiate a mechanical and biochemical cascade leading to disc degeneration, but the link between the local damage of the puncture and the disc-wide effects is not well understood. This work aimed at determining the micro-mechanical effects of the puncture far from its site, and to observe the damage induced by the puncture with high resolution imaging. Results show that the puncture had modest effect far from the puncture, but lumps of tissue were left by the needle, detached from the disc; these could cause further damage through friction and inflammation of the surrounding tissues. This suggests that the cascade leading to degeneration is probably driven by a biochemical response rather than disc-wide mechanical effects., (Copyright © 2017 Acta Materialia Inc. All rights reserved.)

Background: We previously measured the rate of regaining muscle strength during rehabilitation of lower leg muscles in patients following lower leg casting. Our primary aim in this study was to measure the rate of gain of strength in healthy individuals undergoing a similar training regime. Our secondary aim was to test the ability of MRI to provide a biomarker for muscle function., Methods: Men and women were recruited in three age groups: 20-30, 50-65 and over 70 years. Their response to resistance training of the right lower leg twice a week for 8 weeks was monitored using a dynamometer and MRI of tibialis anterior, soleus and gastrocnemius muscles at 2 weekly intervals to measure muscle size (anatomical cross-sectional area ( ACSA )) and quality ( T 2 relaxation). Forty-four volunteers completed the study., Results: Baseline strength declined with age. Training had no effect in middle-aged females or in elderly men in dorsiflexion. Other groups significantly increased both plantarflexion and dorsiflexion strength at rates up to 5.5 N m week -1 in young females in plantarflexion and 1.25 N m week -1 in young males in dorsiflexion. No changes were observed in ACSA or T 2 in any age group in any muscle., Conclusion: Exercise training improves muscle strength in males at all ages except the elderly in dorsiflexion. Responses in females were less clear with variation across age and muscle groups. These results were not reflected in simple MRI measures that do not, therefore, provide a good biomarker for muscle atrophy or the efficacy of rehabilitation., Competing Interests: Competing interests: None declared.

Background: Resistance exercise increases muscle mass and function in older adults, but responses are attenuated compared with younger people. Data suggest that long-chain n-3 polyunsaturated fatty acids (PUFAs) may enhance adaptations to resistance exercise in older women. To our knowledge, this possibility has not been investigated in men., Objective: We sought to determine the effects of long-chain n-3 PUFA supplementation on resistance exercise training-induced increases in muscle mass and function and whether these effects differ between older men and women., Design: Fifty men and women [men: n = 27, mean ± SD age: 70.6 ± 4.5 y, mean ± SD body mass index (BMI; in kg/m 2 ): 25.6 ± 4.2; women: n = 23, mean ± SD age: 70.7 ± 3.3 y, mean ± SD BMI: 25.3 ± 4.7] were randomly assigned to either long-chain n-3 PUFA (n = 23; 3 g fish oil/d) or placebo (n = 27; 3 g safflower oil/d) and participated in lower-limb resistance exercise training twice weekly for 18 wk. Muscle size, strength, and quality (strength per unit muscle area), functional abilities, and circulating metabolic and inflammatory markers were measured before and after the intervention., Results: Maximal isometric torque increased after exercise training to a greater (P < 0.05) extent in the long-chain n-3 PUFA group than in the placebo group in women, with no differences (P > 0.05) between groups in men. In both sexes, the effect of exercise training on maximal isokinetic torque at 30, 90, and 240° s -1 , 4-m walk time, chair-rise time, muscle anatomic cross-sectional area, and muscle fat did not differ (P > 0.05) between groups. There was a greater (P < 0.05) increase in muscle quality in women after exercise training in the long-chain n-3 PUFA group than in the placebo group, with no such differences in men (P > 0.05). Long-chain n-3 PUFAs resulted in a greater decrease (P < 0.05) than the placebo in plasma triglyceride concentrations in both sexes, with no differences (P > 0.05) in glucose, insulin, or inflammatory markers., Conclusion: Long-chain n-3 PUFA supplementation augments increases in muscle function and quality in older women but not in older men after resistance exercise training. This trial was registered at clinicaltrials.gov as NCT02843009.

Resistance exercise training is known to be effective in increasing muscle mass in older people. Acute measurement of protein metabolism data has indicated that the magnitude of response may differ between sexes. We compared adaptive responses in muscle mass and function to 18 weeks resistance exercise training in a cohort of older (>65 years) men and women. Resistance exercise training improved knee extensor maximal torque, 4 m walk time, time to complete five chair rises, muscle anatomical cross-sectional area (ACSA) and muscle quality with no effect on muscle fat/water ratio or plasma glucose, insulin, triacylglycerol, IL-6, and TNF-α Differences between sexes were observed for knee extensor maximal torque and muscle quality with greater increases observed in men versus women (P < 0.05). Maximal torque increased by 15.8 ± 10.6% in women and 41.7 ± 25.5% in men, whereas muscle quality increased by 8.8 ± 17.5% in women and by 33.7 ± 25.6% in men. In conclusion, this study has demonstrated a difference in the magnitude of adaptation, of some of the outcome measures employed, in response to 18 weeks of resistance exercise training between men and women. The mechanisms underlying this observation remain to be established., (© 2016 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of the American Physiological Society and The Physiological Society.)

Unlabelled: The intervertebral disc is a multicomposite structure, with an outer fibrous ring, the annulus fibrosus, retaining a gel-like core, the nucleus pulposus. The disc presents complex mechanical behaviour, and it is of high importance for spine biomechanics. Advances in multiscale modelling and disc repair raised a need for new quantitative data on the finest details of annulus fibrosus mechanics. In this work we explored inter-lamella and inter-bundle behaviour of the outer annulus using micromechanical testing and second harmonic generation microscopy. Twenty-one intervertebral discs were dissected from cow tails; the nucleus and inner annulus were excised to leave a ring of outer annulus, which was tested in circumferential loading while imaging the tissue's collagen fibres network with sub-micron resolution. Custom software was developed to determine local tissue strains through image analysis. Inter-bundle linear and shear strains were 5.5 and 2.8 times higher than intra-bundle strains. Bundles tended to remain parallel while rotating under loading, with large slipping between them. Inter-lamella linear strain was almost 3 times the intra-lamella one, but no slipping was observed at the junction between lamellae. This study confirms that outer annulus straining is mainly due to bundles slipping and rotating. Further development of disc multiscale modelling and repair techniques should take into account this modular behaviour of the lamella, rather than considering it as a homogeneous fibre-reinforced matrix., Statement of Significance: The intervertebral disc is an organ tucked between each couple of vertebrae in the spine. It is composed by an outer fibrous layer retaining a gel-like core. This organ undergoes severe and repeated loading during everyday life activities, since it is the compliant component that gives the spine its flexibility. Its properties are affected by pathologies such as disc degeneration, a major cause of back pain. In this article we explored the micromechanical behaviour of the disc's outer layer using second harmonic generation, a technique which allowed us to visualize, with unprecedented detail, how bundles of collagen fibres slide relative to each other when loaded. Our results will help further the development of new multiscale numerical models and repairing techniques., (Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Purpose: We have previously shown that the lumbar spine has an intrinsic shape specific to the individual and characteristic of sitting, standing and supine postures. The purpose of this study was to test the hypothesis that this intrinsic shape is detectable throughout a range of postures from extension to full flexion in healthy adults., Methods: Sagittal images of the lumbar spine were taken using a positional MRI with participants (n = 30) adopting six postures: seated extension, neutral standing, standing with 30, 45 and 60° and full flexion. Active shape modelling (ASM) was used to identify and quantify 'modes' of variation in the shape of the lumbar spine., Results: ASM showed that 89.5% of the variation in the shape of the spine could be explained by the first two modes; describing the overall curvature and the distribution of curvature of the spine. Mode scores were significantly correlated between all six postures (modes 1-9, r = 0.4-0.97, P < 0.05), showing that an element of intrinsic shape was maintained when changing postures. The spine was most even in seated extension (P < 0.001) and most uneven between 35 and 45° flexion (P < 0.05)., Conclusions: This study shows that an individual's intrinsic lumbar spine shape is quantifiable and detectable throughout lumbar flexion and extension. These findings will enable the role of lumbar curvature in injury and low back pain to be assessed in the clinic and in the working and recreational environments.

A previous modelling study predicted that the forces applied by the extensor muscles to stabilise the lumbar spine would be greater in spines that have a larger sagittal curvature (lordosis). Because the force-generating capacity of a muscle is related to its size, it was hypothesised that the size of the extensor muscles in a subject would be related to the size of their lumbar lordosis. Magnetic resonance imaging (MRI) data were obtained, together with age, height, body mass and back pain status, from 42 female subjects. The volume of the extensor muscles (multifidus and erector spinae) caudal to the mid-lumbar level was estimated from cross-sectional area measurements in axial T1-weighted MRIs spanning the lumbar spine. Lower lumbar curvature was determined from sagittal T1-weighted images. A stepwise linear regression model was used to determine the best predictors of muscle volume. The mean lower lumbar extensor muscle volume was 281 cm(3) (SD = 49 cm(3)). The mean lower lumbar curvature was 30 ° (SD = 7 °). Five subjects reported current back pain and were excluded from the regression analysis. Nearly half the variation in muscle volume was accounted for by the variables age (standardised coefficient, B = -3.2, P = 0.03) and lower lumbar curvature (B = 0.47, P = 0.002). The results support the hypothesis that extensor muscle volume in the lower lumbar spine is related to the magnitude of the sagittal curvature; this has implications for assessing muscle size as an indicator of muscle strength., (© 2013 Anatomical Society.)

The shape of the lumbar spine in the sagittal plane varies between individuals and as a result of postural changes but it is not known how the shape in different postures is related. Sagittal images of the lumbar spines of 24 male volunteers were acquired using a positional magnetic resonance scanner. The subjects were imaged lying supine, standing and sitting. An active shape model was used to characterize shape in terms of independent modes of variation. Two modes were identified that described the total (mode 1) and distribution (mode 2) of the curvature. The spinal shape was found to be intercorrelated between the three postures for both modes, suggesting that the lumbar spine has an element of shape that is partially maintained despite postural alterations. Mode 1 values indicated that the spine was straightest when standing and curviest when sitting. Mode 2 values indicated that the distribution in the curvature was most even when sitting and least even when lying supine. Systematic differences in the behaviour of the spine, when changing posture, were found that suggest that the shape of the spine may affect its biomechanics.

Collagen fibrils provide tensile reinforcement for extracellular matrix. In at least some tissues, the fibrils have a paraboloidal taper at their ends. The purpose of this paper is to determine the implications of this taper for the function of collagen fibrils. When a tissue is subjected to low mechanical forces, stress will be transferred to the fibrils elastically. This process was modelled using finite element analysis because there is no analytical theory for elastic stress transfer to a non-cylindrical fibril. When the tissue is subjected to higher mechanical forces, stress will be transferred plastically. This process was modelled analytically. For both elastic and plastic stress transfer, a paraboloidal taper leads to a more uniform distribution of axial tensile stress along the fibril than would be generated if it were cylindrical. The tapered fibril requires half the volume of collagen than a cylindrical fibril of the same length and the stress is shared more evenly along its length. It is also less likely to fracture than a cylindrical fibril of the same length in a tissue subjected to the same mechanical force.

Poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels have been used, or suggested for use, in a wide range of biomedical applications. In many of these applications, the mechanical properties of the gel are important for its proper functioning. These properties are influenced by a number of factors, including water content. In this study the storage and loss shear moduli were measured as a function of frequency for gels with water contents ranging from 22% to 48% at a temperature of 37 degrees C. At low frequencies and high water contents, deformation frequency had little effect. However, at higher frequencies and lower water contents, both moduli increased markedly with increasing frequency. This can be explained by the gels approaching a glass transition. The curves describing the behavior of each gel were combined to form a master curve, using a method analogous to the time-temperature superposition principle. This master curve can be used to predict the shear moduli for gels with a wide range of water contents and loading frequencies. For example, for a gel with a water content of 47.8% (as a percentage of the mass of gel), the curve provides shear moduli values over a frequency range of 10(-2)-10(4) Hz.

The influence of water on the physical properties of a hydrogel is important for understanding natural tissues and in designing synthetic materials to replace them. In this study, poly (2-hydroxyethyl methacrylate) (pHEMA) was used as a model system to understand how water interacts with the polymer of a hydrogel. Thermal analysis methods (thermogravimetric analysis coupled to mass spectrometry and differential scanning calorimetry) were used to determine: (i) the total water content of pHEMA gels; (ii) how this water was lost during heating; (iii) the relationship between water content of the gel and its glass transition temperature; and (iv) the behavior of the water in the gel on cooling. Previous researchers have invoked various models to describe the organization of water in a hydrogel. In this study, the simplest model which could explain all of the results from the different thermal analysis techniques was one which consisted of three classes of water: (i) hydration water in close proximity to the polymer; (ii) interstitial water in regions or cavities surrounded by polymer chains; and (iii) bulk water.

An axisymmetric finite element model of a human lumbar disk was developed to investigate the properties required of an implant to replace the nucleus pulposus. In the intact disk, the nucleus was modeled as a fluid, and the annulus as an elastic solid. The Young's modulus of the annulus was determined empirically by matching model predictions to experimental results. The model was checked for sensitivity to the input parameter values and found to give reasonable behavior. The model predicted that removal of the nucleus would change the response of the annulus to compression. This prediction was consistent with experimental results, thus validating the model. Implants to fill the cavity produced by nucleus removal were modeled as elastic solids. The Poisson's ratio was fixed at 0.49, and the Young's modulus was varied from 0.5 to 100 MPa. Two sizes of implant were considered: full size (filling the cavity) and small size (smaller than the cavity). The model predicted that a full size implant would reverse the changes to annulus behavior, but a smaller implant would not. By comparing the stress distribution in the annulus, the ideal Young's modulus was predicted to be approximately 3 MPa. These predictions have implications for current nucleus implant designs., (Copyright 2001 Kluwer Academic Publishers)

The upright thoraco-lumbar spine resembles an Euler column buckled in the second mode (n = 2) when viewed in the sagittal plane. An advantage of n = 2 buckling is that further load can be carried without adopting a stooped posture. Flexion of the spine is considered as the first quarter cycle of an Euler pendulum. This is possible if the antagonistic muscles which control movement increase the bending stiffness, EI, to a value of about 15 N m2. If the muscles are incapable of increasing EI sufficiently to support the weight of the body, or any excess load, the spine will be dynamically unstable. This conclusion is consistent with a static model which considers spinal instability as 'loss of stiffness' and a dynamic model which suggests that it arises from ineffective adaptive control. The flexed spine resembles an n = 1 buckled column.