Search

Long-term observation of single-cell oscillations within tissue networks is now possible by combining bioluminescence reporters with stable tissue explant culture techniques. This method is particularly effective in revealing the network dynamics in systems with slow oscillations, such as circadian clocks. However, the low intensity of luciferase-based bioluminescence requires signal amplification using specialized cameras (e.g., I-CCDs and EM-CCDs) and prolonged exposure times, increasing baseline noise and reducing temporal resolution. To address this limitation, we implemented a cost-effective optical enhancement technique called telecompression, first used in astrophotography and now commonly used in digital photography. By combining a high numerical aperture objective lens with a magnification-reducing relay lens, we significantly increased the collection efficiency of the bioluminescence signal without raising the baseline CCD noise. This method allows for shorter exposure times in time-lapse imaging, enhancing temporal resolution and enabling more precise period estimations. Our implementation demonstrates the feasibility of telecompression for enhancing bioluminescence imaging for the tissue-level network observation of circadian clocks. [ABSTRACT FROM AUTHOR]

This article presents a comprehensive study on the impact of irradiation optical fiber cores with a femtosecond-pulsed laser, operating at a wavelength of 1030 nm, on the signal amplitude in Rayleigh scattering-based optical frequency domain reflectometry (OFDR). The experimental study involves two fibers with significantly different levels of germanium doping: the standard single-mode fiber (SMF-28) and the ultra-high numerical aperture fiber (UHNA7). The research findings reveal distinct characteristics of reflected and scattered light amplitudes as a function of pulse energy. Although different amplitude changes are observed for the examined fibers, both can yield an enhancement of amplitude. The paper further investigates the effect of fiber Bragg grating inscription on the overall amplitude of reflected light. The insights gained from this study could be beneficial for controlling the enhancement of light scattering amplitude in fibers with low or high levels of germanium doping. [ABSTRACT FROM AUTHOR]

The development of bend‐induced effectively single‐mode fiber with a square cross‐section and flat top‐hat intensity distribution is reported using core topology nanostructuring dedicated to femtosecond laser ablation systems. The fiber's core comprises 5419 silica and germanium‐doped silica nanorods with a diameter of 430 nm each arranged into a hexagonal lattice. The distribution of the rods is calculated using in‐house developed code based on the Monte Carlo algorithm to obtain a target shape of mode and intensity distribution. As a proof‐of‐concept, a silica nanostructured fiber with a 24 µm core is developed and verified against the purity of mode guidance, bending, and guiding losses. It is shown that for a wavelength of 1030 nm, the fiber is effectively single‐mode with 96% mode purity when bending with a radius of 20 cm is applied. The fiber has a measured mode area of 360 µm2, numerical aperture of 0.03, and total losses of 0.07 dB m−1. [ABSTRACT FROM AUTHOR]

Significance: Rapid acquisition of large imaging volumes with microscopic resolution is an essential unmet need in biological research, especially for monitoring rapid dynamical processes such as fast activity in distributed neural systems. Aim: We present a multifocal strategy for fast, volumetric, diffraction-limited resolution imaging over relatively large and scalable fields of view (FOV) using singlecamera exposures. Approach: Our multifocal microscopy approach leverages diffraction to image multiple focal depths simultaneously. It is based on a custom-designed diffractive optical element suited to low magnification and large FOV applications and customized prisms for chromatic correction, allowing for wide bandwidth fluorescence imaging. We integrate this system within a conventional microscope and demonstrate that our design can be used flexibly with a variety of magnification/numerical aperture (NA) objectives. Results: We first experimentally and numerically validate this system for large FOV microscope imaging (three orders-of-magnitude larger volumes than previously shown) at resolutions compatible with cellular imaging. We then demonstrate the utility of this approach by visualizing high resolution three-dimensional (3D) distributed neural network at volume rates up to 100 Hz. These demonstrations use genetically encoded Ca2þ indicators to measure functional neural imaging both in vitro and in vivo. Finally, we explore its potential in other important applications, including blood flow visualization and real-time, microscopic, volumetric rendering. Conclusions: Our study demonstrates the advantage of diffraction-based multifocal imaging techniques for 3D imaging of mm-scale objects from a single-camera exposure, with important applications in functional neural imaging and other areas benefiting from volumetric imaging. [ABSTRACT FROM AUTHOR]

Significance: Hair-thin multimode optical fiber-based holographic endoscopes have gained considerable interest in modern neuroscience for their ability to achieve cellular and even subcellular resolution during in-vivo deep brain imaging. However, the application of multimode fibers in freely moving animals presents a persistent challenge as it is difficult to maintain optimal imaging performance while the fiber undergoes deformations. Aim: We propose a fiber solution for challenging in-vivo applications with the capability of deep brain high spatial resolution imaging and neuronal activity monitoring in anesthetized as well as awake behaving mice. Approach: We used our previously developed M3CF multimode-multicore fiber to record fluorescently labeled neurons in anesthetized mice. Our M3CF exhibits a cascaded refractive index structure, enabling two distinct regimes of light transport that imitate either a multimode or a multicore fiber. The M3CF has been specifically designed for use in the initial phase of an in-vivo experiment, allowing for the navigation of the endoscope's distal end toward the targeted brain structure. The multicore regime enables the transfer of light to and from each individual neuron within the field of view. For chronic experiments in awake behaving mice, it is crucial to allow for disconnecting the fiber and the animal between experiments. Therefore, we provide here an effective solution and establish a protocol for reconnection of two segments of M3CF with hexagonally arranged corelets. Results: We successfully utilized the M3CF to image neurons in anaesthetized transgenic mice expressing enhanced green fluorescent protein. Additionally, we compared imaging results obtained with the M3CF with larger numerical aperture (NA) fibers in fixed whole-brain tissue. Conclusions: This study focuses on addressing challenges and providing insights into the use of multimode-multicore fibers as imaging solutions for in-vivo applications. We suggest that the upcoming version of the M3CF increases the overall NA between the two cladding layers to allow for access to high resolution spatial imaging. As the NA increases in the multimode regime, the fiber diameter and ring structure must be reduced to minimize the computational burden and invasiveness. [ABSTRACT FROM AUTHOR]

As an integrable micro-optical device, micro lens arrays (MLAs) have significant applications in modern optical imaging, new energy technology, and advanced displays. In order to reduce the impact of laser modification on wet etching, we propose a technique of femtosecond laser penetration-induced modification-assisted wet etching (FLIPM-WE), which avoids the influence of previous modification layers on subsequent laser pulses and effectively improves the controllability of lens array preparation. We conducted a detailed study on the effects of the laser single pulse energy, pulse number, and hydrofluoric acid etching duration on the morphology of micro lenses and obtained the optimal process parameters. Ultimately, two types of fused silica micro lens arrays with different focal lengths but the same numerical aperture (NA = 0.458) were fabricated using the FLPIM-WE technology. Both arrays exhibited excellent geometric consistency and surface quality (Ra~30 nm). Moreover, they achieved clear imaging at various magnifications with an adjustment range of 1.3×~3.0×. This provides potential technical support for special micro-optical systems. [ABSTRACT FROM AUTHOR]

A nonlinear robust motion control strategy was proposed to achieve precise movement of objective motion carrier in context of large numerical aperture microscopy imaging technology, which required a long stroke, high precision, and large load capabilities. An optical path system and a virtual prototype of a large numerical aperture microscope were designed. In addition, a ball-screw-driven objective motion carrier was designed, and the backlash of ball-screw was eliminated by double nut preloading method. To achieve finite-time convergence of system state and improve system robust¬ness, an adaptive technology was employed in nonsingular terminal sliding mode control. Further¬more, to address nonlinear friction effect in ball-screw transmission mechanisms, TDE technology was employed to realize online estimation and real-time compensation of friction forces. TDE technolo¬gy and adaptive nonsingular terminal sliding mode control were adopted to achieve model-free control characteristics. The stability of closed-loop system was proved by Lyapunov theory. Consequently, a high-resolution optical microscope was developed to achieve precise movement of objective motion car¬rier, and microscopic images of mouse cardiac muscle cells were acquired to demonstrate the effective¬ness of the proposed algorithm [ABSTRACT FROM AUTHOR]

We present deep-ultraviolet Fourier ptychography (DUV-FP) for high-resolution chemical imaging of biological specimens in their native state without exogenous stains. This approach uses a customized 265-nm DUV LED array for angle-varied illumination, leveraging the unique DUV absorption properties of biomolecules at this wavelength region. We implemented a robust feature-domain optimization framework to overcome common challenges in Fourier ptychographic reconstruction, including vignetting, pupil aberrations, stray light problems, intensity variations, and other systematic errors. By using a 0.12 numerical aperture low-resolution objective lens, our DUV-FP prototype can resolve the 345-nm linewidth on a resolution target, demonstrating at least a four-fold resolution gain compared to the captured raw images. Testing on various biospecimens demonstrates that DUV-FP significantly enhances absorption-based chemical contrast and reveals detailed structural and molecular information. To further address the limitations of conventional FP in quantitative phase imaging, we developed a spatially coded DUV-FP system. This platform enables true quantitative phase imaging of biospecimens with DUV light, overcoming the non-uniform phase response inherent in traditional microscopy techniques. The demonstrated advancements in high-resolution, label-free chemical imaging may accelerate developments in digital pathology, potentially enabling rapid, on-site analysis of biopsy samples in clinical settings. [ABSTRACT FROM AUTHOR]

Spectral confocal sensors are effective for measuring displacements. The core of the spectral confocal measurement system is a dispersive objective lens that uses optical dispersion to establish a one-to-one correspondence between the focusing position and wavelength, achieving high-resolution measurements in the longitudinal direction. Despite significant progress in dispersive objective lenses for spectral confocal sensor systems, challenges such as a limited dispersion range, high cost, and insufficient measurement accuracy persist. To expand the measurement range and improve the accuracy of the spectral confocal sensor, we designed a compact, long-axial dispersion objective lens. This lens has a simple structure that requires only six lens elements, two of which form cemented doublets. The system length is 58 mm, with a working distance of 46 ± 6 mm and a dispersion range of 12 mm within the wavelength range of 450–656 nm. The lens has an object-side numerical aperture (NA) of 0.22 and an image-side NA between 0.198 and 0.24, ensuring high light energy utilization. Finally, a spectral confocal measurement system was constructed based on the designed dispersive objective lens, and performance evaluation tests were conducted. The test results showed that the system achieved a resolution of 0.15 μm and a maximum linear error of ±0.7 μm, demonstrating high-precision measurement capabilities. The proposed lens design enables the development of more portable and cost-effective spectral confocal sensors. [ABSTRACT FROM AUTHOR]

We demonstrate a technique for flexibly controlling subwavelength focusing and scanning, by using the Fourier translation property of a topology-preserved flat lens. The Fourier transform property of the flat lens enables converting an initial phase shift of light into a spatial displacement of its focus. The flat lens used in the technique exhibits a numerical aperture of 0.7, leading to focusing the incident light to a subwavelength scale. Based on the technique, we realize flexible control of the focal positions with arbitrary incident light, including higher-order structured light. Particularly, the presented platform can generate multifocal spots carrying optical angular momentum, with each focal spot independently controlled by the incident phase shift. This technique results in a scanning area of 10 μm × 10 μm, allowing to realize optical scanning imaging with spatial resolution up to 700 nm. This idea is able to achieve even smaller spatial resolution when using higher-numerical-aperture flat lens and can be extended to integrated scenarios with smaller dimension. The presented technique benefits potential applications such as in scanning imaging, optical manipulation, and laser lithography. [ABSTRACT FROM AUTHOR]

A 2D numerical model based on the finite-difference time-domain (FDTD) method had been developed to investigate the correspondence between the spatio-temporal aspects and intensity evolution of a focused laser beam after the propagation through micro-structured dispersive materials under the pulse duration variation in the few-cycle regime. In parallel with the laser field intensification investigations, a spatio-temporal analysis of the electromagnetic field in the focal point is elaborated as a function of the relative spatial extension of the pulse in order to provide a complex description of this approach. The numerical computations indicate that shorter and more intense pulses may be obtained in well-defined conditions. Also, the major contribution played by the input laser beam profile, numerical aperture, and the dispersive material features in the intensity enhancement process in the focal point is pointed out. The present approach can be used as a versatile method for field intensification in various ultra-short and ultra-intense few-cycle laser pulse experiments. [ABSTRACT FROM AUTHOR]

K9 glass is a classical transparent material widely used in high-power optical systems due to its high-temperature resistance. However, the precision machining of K9 glass is difficult. The laser processing method, characterized by being non-contact, having a small heat-affected zone, and having high processing precision, is commonly employed for processing intricate structures. In this study, the vector diffraction model is employed to simulate the internal electric field inside the material when focused by objective lenses with varying numerical apertures. Furthermore, the temperature field is simulated. The simulation considered the nonlinear absorption of the material, the stretching of the focal dot due to spherical aberration, and the energy loss of the laser during the focusing process. The experiment indicated that the ablated area consists of numerous small, ablated dots and that multiple ablated areas emerged under an NA of 0.6. This study can provide valuable references for the research of the interaction between lasers and glass materials. [ABSTRACT FROM AUTHOR]

Ytterbium (Yb)-doped fibers using aluminophosphosilicate (Yb-APS) host glass offer significant advantages over conventional aluminosilicate (Yb-AS) fibers, such as strong photodarkening resistance, higher RE-ion solubility and lower Numerical Aperture (NA), making them ideal for high-power laser applications. However, achieving optimal performance in Yb-APS fiber fabrication poses various challenges, including maintaining a precise Al3+/P5+ ratio (1:1), minimizing the central dip in the refractive index profile (RIP), ensuring proper dopant distribution, and reducing background loss. We introduce a new fabrication method for Yb-APS fiber to address these challenges. This approach entails first synthesizing amorphous Yb³⁺: AlPO 4 particles, then incorporating them into the fiber core using a hybrid technique that merges Vapor Phase Delivery (VPD) with solution doping (SD). We extensively utilized various materials and optical characterizations, including XRD, FTIR, Raman spectroscopy, FESEM, and XPS, to fine-tune the composition of Yb³⁺: AlPO 4. The optical characterization of the developed preform sample, including absorption, emission, and luminescent lifetime measurements, was conducted to assess the fabrication technique's suitability. The results confirmed the successful incorporation of Yb-ions into the preform core, with peaks consistent with reported values. The fiber's attenuation loss was measured, showing approximately 10 dB/km at 1200 nm. This indicates that the particles dissolved smoothly during preform and fiber processing, resulting in minimal scattering loss in the fiber core. The developed fiber demonstrated NA of 0.1, uniform RIP along the preform length with significant reduction of the central dip formation and improved spectral performance (∼1.7X broader bandwidth) compared with an equivalent Yb-AS fiber. These findings suggest the Yb-APS fiber's overall effectiveness and structural robustness, highlighting the potential of the proposed fabrication method for high-power fiber laser applications. [ABSTRACT FROM AUTHOR]

We develop a new all-dielectric metasurface for designing high quality-factor (Q-factor) quasi-bound states in the continuum (quasi-BICs) using asymmetry kite-shaped nanopillar arrays. The Q-factors of quasi-BICs follow the quadratic dependence on the geometry asymmetry, and meanwhile their resonant spectral profiles can be readily tuned between Fano and Lorentzian lineshapes through the interplay with the broadband magnetic dipole mode. The third-harmonic signals of quasi-BIC modes exhibit a gain from 43.4- to 634-fold enhancement between samples with an axial-length difference of 15 nm and 75 nm when reducing the numerical aperture of the illuminating objective lenses in nonlinear measurement, which is attributed to the increasing illumination spot size and the less contribution from the large oblique incident light for establishing quasi-BIC modes with high-Q spectral profile and strong near-field intensity. The silicon-based metasurfaces with their simple geometry are facile for large-area fabrication and open new possibilities for the optimization of upconversion processes to achieve efficient nonlinear devices. [ABSTRACT FROM AUTHOR]

Fourier ptychographic microscopy (FPM) is a computational imaging technology that can acquire high-resolution large-area images for applications ranging from biology to microelectronics. In this study, we utilize multifocal plane imaging to enhance the existing FPM technology. Using an RGB light emitting diode (LED) array to illuminate the sample, raw images are captured using a color camera. Then, exploiting the basic optical principle of wavelength-dependent focal length variation, three focal plane images are extracted from the raw image through simple R, G, and B channel separation. Herein, a single aspherical lens with a numerical aperture (NA) of 0.15 was used as the objective lens, and the illumination NA used for FPM image reconstruction was 0.08. Therefore, simultaneous multifocal plane FPM with a synthetic NA of 0.23 was achieved. The multifocal imaging performance of the enhanced FPM system was then evaluated by inspecting a transparent organic light-emitting diode (OLED) sample. The FPM system was able to simultaneously inspect the individual OLED pixels as well as the surface of the encapsulating glass substrate by separating R, G, and B channel images from the raw image, which was taken in one shot. [ABSTRACT FROM AUTHOR]

Despite their excellent performance and versatility, the efficient integration of small lasers with other optical devices has long been hindered by their broad emission divergence. In this study, we introduce a novel approach for emission engineering in microdisk lasers, significantly enhancing their vertical emission output by directly integrating specially designed reflective metalenses, referred to as "meta-micromirrors". A 5 μm-diameter microdisk laser is precisely positioned at an 8 μm focal distance on a 30 × 30 μm2 meta-micromirror featuring a numerical aperture (NA) of 0.95, accomplished through micro-transfer printing techniques. Our experiments demonstrated a notable increase in the emission efficiency within an NA of 0.65. Specifically, we observed a 2.68-fold increase in the average emission from ten microdisk lasers. This integration not only enhances the emission efficiency of small lasers but also holds considerable implications for micro- and nano-photonic integrations. The results of this integration open up new possibilities in various fields, including photonic integrated circuits, bio-sensing technologies, and the development of quantum light sources. [ABSTRACT FROM AUTHOR]

This paper presents a numerical simulation study on the coupling of lasers and waterjets, focusing on the distribution of the spot power density. The analysis utilized a laser wavelength of 532 nm, chosen for its minimal energy attenuation in water. The key conditions for successful coupling were identified, including the necessity for the spot diameter of the laser beam to be smaller than the nozzle diameter of the waterjet fiber, the numerical aperture of the laser beam to be lower than that of the waterjet fiber, and the divergence angle of the laser to be smaller than the critical angle for total internal reflection. Using the ZEMAX simulation software, various coupling cases were explored, revealing that the radial displacement of the waterjet fiber relative to the laser axis has the most significant impact on the output power density, followed by angular deflection, whereas the axial displacement has the minimal effect. This study also investigates the combined effects of different influencing factors on the peak distribution of the output power density, uncovering distinct characteristics resulting from these deviations. Overall, the research findings provide theoretical insights for achieving effective coupling between fine waterjets and lasers as well as for the design of water-guided laser coupling devices. [ABSTRACT FROM AUTHOR]

Optically levitated multiple nanoparticles have emerged as a platform for studying complex fundamental physics such as non-equilibrium phenomena, quantum entanglement, and light–matter interaction, which could be applied for sensing weak forces and torques with high sensitivity and accuracy. An optical trapping landscape of increased complexity is needed to engineer the interaction between levitated particles beyond the single harmonic trap. However, existing platforms based on spatial light modulators for studying interactions between levitated particles suffered from low efficiency, instability at focal points, the complexity of optical systems, and the scalability for sensing applications. Here, we experimentally demonstrated that a metasurface which forms two diffraction-limited focal points with a high numerical aperture (∼0.9) and high efficiency (31 %) can generate tunable optical potential wells without any intensity fluctuations. A bistable potential and double potential wells were observed in the experiment by varying the focal points' distance, and two nanoparticles were levitated in double potential wells for hours, which could be used for investigating the levitated particles' nonlinear dynamics, thermal dynamics and optical binding. This would pave the way for scaling the number of levitated optomechanical devices or realizing paralleled levitated sensors. [ABSTRACT FROM AUTHOR]

Trapping and manipulating micro-objects and achieving high-precision measurements of tiny forces and displacements are of paramount importance in both physical and biological research. While conventional optical tweezers rely on tightly focused beams generated by bulky microscope systems, the emergence of flat lenses, particularly metalenses, has revolutionized miniature optical tweezers applications. In contrast to traditional objectives, the metalenses can be seamlessly integrated into sample chambers, facilitating flat-optics-based light manipulation. In this study, we propose an experimentally realized transmissive and polarization-insensitive water-immersion metalens, constructed using adaptive nano-antennas. This metalens boasts an ultra-high numerical aperture of 1.28 and achieves a remarkable focusing efficiency of approximately 50 % at a wavelength of 532 nm. Employing this metalens, we successfully demonstrate stable optical trapping, achieving lateral trapping stiffness exceeding 500 pN/(μm W). This stiffness magnitude aligns with that of conventional objectives and surpasses the performance of previously reported flat lenses. Furthermore, our bead steering experiment showcases a lateral manipulation range exceeding 2 μm, including a region of around 0.5 μm exhibiting minimal changes in stiffness for smoothly optical manipulation. We believe that this metalens paves the way for flat-optics-based optical tweezers, simplifying and enhancing optical trapping and manipulation processes, attributing ease of use, reliability, high performance, and compatibility with prevalent optical tweezers applications, including single-molecule and single-cell experiments. [ABSTRACT FROM AUTHOR]

To realize nanoscale manufacturing based on laser direct writing technology, objective lenses with high numerical apertures immersed in water or oil are necessary. The use of liquid medium restricts its application in semiconductors. Achieving nanoscale features on silicon by laser direct writing in a low refractive index medium has been a challenge. In this work, a microsphere assisted femtosecond laser far-field induced dewetting approach is proposed. A reduction in the full-width at half-maximum of the focused light spot is realized by modulating tightly focused light through microspheres and achieving a minimum feature size of 9 nm on silicon in ambient air with energy smaller than the ablation threshold. Theoretical analysis and numerical simulation of laser processing are performed based on a two-temperature model. Furthermore, we explored the potential of femtosecond laser-induced dewetting in nanolithography and demonstrated its ability to achieve an arbitrary structure on silicon. Our work enables laser-based far-field sub-10-nm feature etching on a large-scale, providing a novel avenue for nanoscale silicon manufacturing. [ABSTRACT FROM AUTHOR]

The numerical aperture of the spectrometer is crucial for weak signal detection. The transmission lens-based configuration has more optimization variations, and the grating can work approximately in the Littrow condition; thus, it is easier to acquire high numerical aperture (NA). However, designing a large aperture focusing lens remains challenging, and thus, ultra-high NA spectrometers are still difficult to acquire. In this paper, we propose a method of setting image plane tilt ahead directly when designing the large aperture focusing lens to simplify the high NA spectrometer design. By analyzing the accurate demands of the focusing lens, it can be concluded that a focusing lens with image plane tilt has much weaker demand for achromatism, and other monochromatic aberration can also be reduced, which is helpful to increase the NA. An NA0.5 fiber optic spectrometer design is given to demonstrate the proposed method. The design results show that the NA can achieve 0.5 using four lenses of two materials, and the MTF is higher than 0.5 when the spectral dispersion length is 12.5 mm and the pixel size is 25 μm, and thus, the spectral resolution can achieve 6.5 nm when the spectral sampling ratio is 2:1. The proposed method can provide reference for applications when appropriate materials are limited and high sensitivity is necessary. [ABSTRACT FROM AUTHOR]

The field of large numerical aperture microscopy has witnessed significant advancements in spatial and temporal resolution, as well as improvements in optical microscope imaging quality. However, these advancements have concurrently raised the demand for enhanced precision, extended range, and increased load-bearing capacity in objective motion carrier (OMC). To address this challenge, this study introduces an innovative OMC that employs a ball screw mechanism as its primary driving component. Furthermore, a robust nonlinear motion control strategy has been developed, which integrates fast nonsingular terminal sliding mode, experimental estimation techniques, and adaptive radial basis neural network, to mitigate the impact of nonlinear friction within the ball screw mechanism on motion precision. The stability of the closed-loop control system has been rigorously demonstrated through Lyapunov theory. Compared with other enhanced sliding mode control strategies, the maximum error and root mean square error of this controller are improved by 33% and 34% respectively. The implementation of the novel OMC has enabled the establishment of a high-resolution bio-optical microscope, which has proven its effectiveness in the microscopic imaging of retinal organoids. • Novel SMC Strategy: To address the limitations of traditional SMC, characterized by high gains and pronounced chattering, a novel SMC strategy is introduced. • Online Estimation and Compensation: The utilization of TDE techniques enables online estimation and real-time compensation of unknown terms. • Biophotonic Microscope Development: The research culminates in the development of a biophotonic microscope, wherein the objective motion carrier plays a crucial role in achieving focal plane movement. [ABSTRACT FROM AUTHOR]

A four-group mechanically compensated continuous-zoom microscope is proposed and designed based on the theory of continuous zoom. The system addresses the limitations of traditional continuous-zoom microscopes, including a small zoom ratio, a short working distance, and the loss of details during 2D–3D switching. The system has a magnification of 0.6×~6.0× under two-dimensional observation, adapts to two-third-inch sensors, has a working distance of 130 mm, and adds a 360-degree rotatable beamsplitter for three-dimensional full-field-of-view observation. The magnification, numerical aperture, and sensor dimensions remain unchanged under both two-dimensional and three-dimensional observation. The design results demonstrate that the system is capable of achieving a high zoom ratio of 10× while maintaining a high level of imaging quality in both two-dimensional and three-dimensional modes. The MTF curves for each magnification are in close proximity to the diffraction limit, the spot diagrams are smaller than the airy disk range, and the zoom cam curves are smooth with no inflection points. Furthermore, the system negates the visual discrepancies and loss of detail that arise when switching observation modes due to alterations in system magnification and numerical aperture, thereby broadening the scope of applications for continuous-zoom microscopes. [ABSTRACT FROM AUTHOR]

Based on the demand for high-power output, a spatial beam combining 7-channel quantum cascade lasers (QCLs) is demonstrated in this paper. A "2 + 3 + 2" stepped structure is designed to convert the seven beam spots into a circular arrangement. An aspherical lens with a large numerical aperture (NA) of 0.85 and a focal length of 1.873 mm is used in each single QCL for collimation, and seven reflectors are utilized in the 7-channel QCLs combined in the spatial beam. After combining the spatial beam, the maximum continuous output power of the system is 3.6 W, and the beam quality M2 is 5.59 in the fast axis and 8.3 in the slow axis, respectively. [ABSTRACT FROM AUTHOR]

In this study, we propose a new method for single-shot, high-resolution lensless imaging called double-slit holography. This technique combines the properties of in-line and off-axis holography in one single-shot measurement using the simplest double-slit device: a plate with two apertures. In double-slit holography, a plane wave illuminates the two apertures giving rise to two spherical waves. While diffraction of one spherical wave from a sample positioned behind the first aperture (the object aperture) provides the object wave, the other spherical wave diffracted from the second (reference) aperture provides the reference wave. The resulting interference pattern in the far-field (hologram) combines the properties of an in-line (or Gabor-type) hologram and an off-axis hologram due to the added reference wave from the second aperture. Both the object and reference waves have the same intensity, which ensures high contrast of the hologram. Due to the off-axis scheme, the amplitude and phase distributions of the sample can be directly reconstructed from the hologram, and the twin image can be easily separated. Due to the object wave being the same as in-line holography with a spherical wave, imaging at different magnifications is similarly done by simply adjusting the aperture-to-sample distance. The resolution of the reconstructed object is given by the numerical aperture of the optical setup and the diameter of the reference aperture. It is shown both by theory and simulations that the resolution of the reconstructed object depends on the diameter of the reference wave aperture but does not depend on the diameter of the object aperture. Light optical proof-of-concept experiments are provided. The proposed method can be particularly practical for X-rays, where optical elements such as beam splitters are not available and conventional off-axis holography schemes cannot be realised. [ABSTRACT FROM AUTHOR]

Optical metasurfaces have enabled analog computing and image processing within sub-wavelength footprints, and with reduced power consumption and faster speeds. While various image processing metasurfaces have been demonstrated, most of the considered devices are static and lack reconfigurability. Yet, the ability to dynamically reconfigure processing operations is key for metasurfaces to be used within practical computing systems. Here, we demonstrate a passive edge-detection metasurface operating in the near-infrared regime whose response can be drastically modified by temperature variations smaller than 10 °C around a CMOS-compatible temperature of 65 °C. Such reconfigurability is achieved by leveraging the insulator-to-metal phase transition of a thin layer of vanadium dioxide, which strongly alters the metasurface nonlocal response. Importantly, this reconfigurability is accompanied by performance metrics—such as numerical aperture, efficiency, isotropy, and polarization-independence – close to optimal, and it is combined with a simple geometry compatible with large-scale manufacturing. Our work paves the way to a new generation of ultra-compact, tunable and passive devices for all-optical computation, with potential applications in augmented reality, remote sensing and bio-medical imaging. Researchers demonstrate that image-processing metasurfaces can be dynamically reconfigured by using phase-change materials. The work might lead to novel tunable devices for compact optical computing for applications in AR/VR and bio-medical imaging. [ABSTRACT FROM AUTHOR]

The demand for high-resolution and large-area imaging systems for non-destructive wafer inspection has grown owing to the increasing complexity and extremely fine nature of semiconductor processes. Several studies have focused on developing high-resolution imaging systems; however, they were limited by the tradeoff between image resolution and field of view. Hence, computational imaging has arisen as an alternative method to conventional optical imaging, aimed at enhancing the aforementioned parameters. This study proposes a method for improving the resolution and field of view of an image in a lens-less reflection-type system. Our method was verified by computationally restoring the final image from diffraction images measured at various illumination positions using a visible light source. We introduced speckle illumination to expand the numerical aperture of the entire system, simultaneously improving image resolution and field of view. The image reconstruction process was accelerated by employing a convolutional neural network. Using the reconstructed phase images, we implemented high-resolution topography and demonstrated its applicability in wafer surface inspection. Furthermore, we demonstrated an ideal diffraction-limited spatial resolution of 1.7 μm over a field of view of 1.8 × 1.8 mm2 for the topographic imaging of targets with various surface roughness. The proposed approach is suitable for applications that simultaneously require high throughput and resolution, such as wafer-wide integrated metrology, owing to its compact design, cost-effectiveness, and mechanical robustness. [ABSTRACT FROM AUTHOR]

First discovered by Ernest Abbe in 1873, the resolution limit of a far-field microscope is considered determined by the numerical aperture and wavelength of light, approximately λ 2 N A . With the advent of modern fluorescence microscopy and nanoscopy methods over the last century, this definition is insufficient to fully describe a microscope's resolving power. To determine the practical resolution limit of a fluorescence microscope, photon noise remains one essential factor yet to be incorporated in a statistics-based theoretical framework. We proposed an information density measure quantifying the theoretical resolving power of a fluorescence microscope in the condition of finite photons. The developed approach not only allows us to quantify the practical resolution limit of various fluorescence and super-resolution microscopy modalities but also offers the potential to predict the achievable resolution of a microscopy design under different photon levels. Abbe's diffraction limit has been a defining concept for microscopy. With finite photon, photon noise remains one essential factor yet to be considered in the theoretical resolution limit. Here, the authors introduced information-based resolution limit allowing for photon-considered resolution assessment of various microscopy and super-resolution modalities. [ABSTRACT FROM AUTHOR]

Interference of two and four light beams with linear or circular polarization is studied analytically and numerically based on the Richards–Wolf formalism. We consider such characteristics of the interference fields as the distribution of intensity, polarization, and spin angular momentum density. The generation of light fields with 1D and 2D periodic structure of both intensity and polarization is demonstrated. We can control the periodic structure both by changing the polarization state of the interfering beams and by changing the numerical aperture of focusing. We consider examples with a basic configuration, as well as those with a certain symmetry in the polarization state of the interfering beams. In some cases, increasing the numerical aperture of the focusing system significantly affects the generated distributions of both intensity and polarization. Experimental results, obtained using a polarization video camera, are in good agreement with the simulation results. The considered light fields can be used in laser processing of thin films of photosensitive (as well as polarization-sensitive) materials in order to create arrays of various ordered nano- and microstructures. [ABSTRACT FROM AUTHOR]

A correction notice has been issued for an article titled "Ergosterol Is Critical for Sporogenesis in Cryptococcus neoformans." The correction involves the removal of incorrect information and the replacement of figures in the original publication. The corrections do not affect the conclusions drawn from the experiments conducted in the manuscript. The correction was approved by the Academic Editor, and all co-authors have agreed with the content of the correction. The authors apologize for any inconvenience caused by the error. [Extracted from the article]

High-order cylindrical vector beams possess flexible spatial polarization and exhibit new effects and phenomena that can expand the functionality and enhance the capability of optical systems. However, building a general analytical model for highly focused beams with different polarization orders remains a challenge. Here, we elaborately develop the vector theory of high-order cylindrical vector beams in a high numerical aperture focusing system and achieve the vectorial diffraction integrals for describing the tight focusing field with the space-variant distribution of polarization orders within the framework of Richards–Wolf diffraction theory. The analytical formulae include the exact three Cartesian components of electric and magnetic distributions in the tightly focused region. Additionally, utilizing the analytical formulae, we can achieve the gradient force, scattering force, and curl-spin force exerted on Rayleigh particles trapped by high-order cylindrical vector beams. These results are crucial for improving the design and engineering of the tightly focused field by modulating the polarization orders of high-order cylindrical vector beams, particularly for applications such as optical tweezers and optical manipulation. This theoretical analysis also extends to the calculation of complicated optical vortex vector fields and the design of diffractive optical elements with high diffraction efficiency and resolution. [ABSTRACT FROM AUTHOR]

Metalenses are flat lenses, where sub-wavelength, so-called meta-atoms manipulate the electric field to perform a given lens function. Compared to traditional lenses, the two main drawbacks of metalenses are their achromatic limitations and low efficiencies. While an abundance of simulations show that efficiencies above 90% are attainable for low numerical apertures (NA), experimental reports showing such high efficiencies are limited. Here, we use electron-beam lithography (EBL) to realize a set of lenses with varying NA from 0.08 to 0.93. The low NAs were expected to fit the model, and the higher NAs determine the validity range of the model. We find that measured efficiencies above 92% for NA = 0.24 are achievable, and that a slight modification of the simulation model extends its validility to NA = 0.6. Based on our results, we discuss that the lower efficiencies reported in the literature are caused by low-fidelity manufacturing, closing the efficiency gap between measurements and simulation in metalens fabrication. While numerical simulations for metalenses frequently show efficiencies above 90% at low numerical apertures, the experimental counterpart struggles to reach such efficiencies. The authors modify the model for prediction and systematically realise a set of high-precision meta-lenses with high efficiencies across the whole numerical aperture range. [ABSTRACT FROM AUTHOR]

High-resolution displacement detection can be achieved by analyzing the scattered light of the trapping beams from the particle in optical tweezers. In some applications where trapping and detecting beams must be separated, a detecting beam can be introduced for independent displacement measurement. However, the detecting beam focus possibly deviates from the center of the particle, which will affect the performance of displacement detection. Here, we detect the displacement of the particle by utilizing the forward scattered light of the detection beam from the particle. The effects of the lateral and axial offsets between the detection beam focus and the particle center on displacement detection are analyzed by the simulation and experiment. These results show that the lateral offsets will decrease the detection sensitivity and linear range. Moreover, it aggravates the crosstalk between the x-direction signal and the y-direction signal of the quadrant photodiode. Besides, the axial offsets also affect the detection sensitivity. More interestingly, an optimal axial offset can improve the sensitivity of displacement detection substantially. In addition, the influence of system parameters, such as particle radius a, numerical aperture of the condenser NAc, and numerical aperture of the objective NAo, on the optimal axial offset is also discussed. This work not only provides ideas for improving the performance of precision measurement by the method of forward scattered light detection but also expands the application of this method in fundamental physics. [ABSTRACT FROM AUTHOR]

The ever-growing demand for miniaturized optical systems presents a significant challenge in revolutionizing their core element – the varifocal lens. Recent advancements in ultra-thin, tunable metasurface optics have introduced new approaches to achieving zoom imaging. However, current varifocal metalens have faced challenges such as low focusing efficiency, limited tunability, and complicated designs. Here, we employ the high-contrast transmit arrays (HCTA) structures to design and fabricate a polarization-independent, single-layer flexible metalens that operates at a wavelength of 940 nm. Using a uniform stretching system, we characterized its optical performance to achieve over 60 % focusing efficiency within a 0 %–25 % stretch range, while the focal length changes align with theoretical predictions. Furthermore, our research also successfully demonstrated the capacity of a metalens with a numerical aperture (NA) of 0.5 to efficiently adjust imaging magnification within a 2× range, achieving imaging results that approach the diffraction limit. This research offers promising prospects for the practical use of compact and miniaturized optoelectronic devices in fields like photography, mixed reality, microscopy, and biomedical imaging. [ABSTRACT FROM AUTHOR]

In this paper, diffraction of scalar waves by a screen with a circular aperture is explored, considering the incidence of either a collimated beam or a focused wave, a historical review of the development of the theory is presented, and the introduction of the Fresnel approximation is described. For diffraction by a focused wave, the general case is considered for both high numerical aperture and for finite values of the Fresnel number. One aim is to develop a theory based on the use of dimensionless optical coordinates that can help to determined the general behaviour and trends of different system parameters. An important phenomenon, the focal shift effect, is discussed as well. Explicit expressions are provided for focal shift and the peak intensity for different numerical apertures and Fresnel numbers. This is one application where the Rayleigh–Sommerfeld diffraction integrals provide inaccurate results. [ABSTRACT FROM AUTHOR]

Coherence scanning interferometry (CSI) is a widely used non-contact method for measuring areal surface topography. The calculation of groove depth typically employs the 'W/3 rule' specified in ISO 5436-1. However, the batwing effect causes overshoots near the groove edges, which can introduce noise singularities in the selected W/3 region for depth calculation, thereby affecting the measurement of rectangular grating depth. This paper introduces the definition of batwing height and width and proposes a simulation model that considers various factors, such as the center wavelength, spectrum of the illuminating light, shadow effect, and numerical aperture, to analyze their influence on depth measurement. The simulation results demonstrate that the batwing width is the primary factor influencing depth measurement for small grating periods. Specifically, a decrease in numerical aperture increases the batwing width, leading to larger depth measurement errors, while a decrease in the center wavelength reduces the batwing width, resulting in smaller depth measurement errors. The influence of the illumination spectrum and shadow effect on depth measurement is found to be minor. Experimental validation using a step standard consisting of rectangular gratings with different periods and depths confirms the agreement between the experimental and simulated results. The proposed method provides a quantitative evaluation of depth measurement accuracy in CSI. [ABSTRACT FROM AUTHOR]

Immersion microscope objectives stand out for their large numerical aperture, which improves the optical resolution of imaging systems such as those used in microscopic interferometry. These objectives increase the gradient forces of a beam focused through them, forming an Optical Trap (OT). However, many studies on microscopic interferometry neglect the contributions of different optical materials in the system that are also exposed to laser radiation, perhaps simply assuming transparency. In this work, a Mach–Zehnder interferometer and an OT, which share several components (including the same oil immersion objective), were coupled. Here, the response of the interferometer to a progressive increase in the OT laser power, while the interferometer laser power remains constant, is reported. Changes in laser power affect the oil temperature, altering its refractive index and volume, which in turn causes a phase shifting on the transmitted wavefront. Optical phase analysis is applied in the three-dimensional measurement of the damage produced by the OT on a paint film. This study suggests that the refractive index variations in the immersion oil affect interferograms because they will then exhibit an additive phase term that must be considered in that final measurement. Additionally, the OT geometry changes with the power increase. [ABSTRACT FROM AUTHOR]

[Display omitted] Metalenses have outstanding light-modulating performances, and studies have been conducted on them to not only replace conventional bulky and heavy refractive lenses but also to expand on them. However, their operating wavelengths have rarely covered the ultraviolet (UV) regime since UV-transparent materials are scarce and nanopatterning techniques have a small patterning area, high cost, and low throughput. These limitations are overcome in this study, and centimeter-scale and highly efficient UV metalenses are successfully mass-produced. The UV metalens is designed to operate at a wavelength of 325 nm, with a numerical aperture of 0.2. Argon fluoride photolithography is used to fabricate an 8-inch master stamp in which 300 metalenses are patterned in an array with a high resolution. The fabricated master stamp can be duplicated repeatedly using wafer-scale nanoimprint lithography. To improve efficiency, we developed a zirconium dioxide–polymer hybrid material that is scalable, easily manufacturable, UV-transparent, and high-index material. The experimental results confirm that the mass-produced metalenses operate as ideal imaging systems, exhibiting an average measured efficiency of 45.1 %. [ABSTRACT FROM AUTHOR]

The multicore fiber amplifier, as a key component in spatial division multiplexing (SDM) communication systems, presents higher technical difficulty compared to traditional multi-channel single core fiber amplifiers, which has sparked widespread attention. To achieve balance, efficiency, miniaturization, and cost-effectiveness in the performance of multi-core optical fiber amplifiers, we propose an innovative triple cladding 13-core Er/Yb co-doped microstructured fiber (13CEYDMOF). The proposed fiber features an outer cladding with peanut-shaped air holes, which enables uniform excitation of the 13 cores using a single multimode laser pump source within the inner cladding. This approach also prevents damage or aging of the fiber's outer coating due to the pump laser. Furthermore, the design of Peanut-Shaped Air Holes effectively increases the numerical aperture (NA) of the inner cladding while reducing the outer diameter of the fiber, enhancing the fiber's mechanical flexibility. To address the coupling difficulties caused by air holes, we bi-directionally pump the 13CEYDMOFA by utilizing a combined technique of the side winding and end pumping. The experimental results show that the 13CEYDMOFA can achieve an average gain of 23.8 dB, a noise figure (NF) of ∼4.6 dB, and an inter-core gain difference of less than 2 dB in the wavelength range of 1529–1565 nm. The in-line amplified transmission experiment demonstrates that the 13CEYDMOFA is well suited for the 13 spatial channels transmission. To the best of our knowledge, this is the first time to realize high performance telecommunication band amplification in a multicore microstructure fiber. [ABSTRACT FROM AUTHOR]

The numerical aperture (NA) of objective lens optical (inspection) systems has been increased to achieve higher resolution. However, the depth of focus decreases with an increase in the NA, and focusing becomes difficult. Therefore, the entire optical lens in currently developed optical inspection systems must be moved to focus within the depth of focus. To achieve a high resolution, many lenses are used in optical inspection systems, increasing the size and weight of the optical systems. To address this issue, a focus control group was placed on a tube lens that could adjust its focus based on the movement of the sample in front of the objective lens. Therefore, we developed a focus range increment to focus on the range of the optical inspection system. Using objective lenses with focal lengths of 30 and 60 mm and tube lenses with a focal length of 300 mm, optical systems for 10× and 5× inspection were constructed. In the designed optical systems, the weights of the objective lenses with focal lengths of 30 and 60 mm were calculated to be approximately 844 and 570 g, respectively. These values confirm that the weight of the moving group can be reduced. [ABSTRACT FROM AUTHOR]

Optical skyrmions, which are topological quasi-particles with nontrivial electromagnetic textures, have garnered escalating research interest recently for their potential in diverse applications. In this paper, we present a method for generating tightly focused optical skyrmion and meron topologies formed by electric-field vectors under 4π-focusing system, where both the topology types (including Néel-, Bloch-, intermediate- and anti-skyrmion/meron) and the normal direction of the two-dimensional topology projection plane can be tailored at will. By utilizing time-reversal techniques, we analytically derive the radiation pattern of a multiple concentric-ring array of dipoles (MCAD) to obtain the required illumination fields on the pupil planes of the two high numerical aperture lenses. The Deby vector diffraction integral theory is employed to calculate the corresponding tightly focused field, and their topology characteristics are quantitatively evaluated by the electric-field vector distribution. The results demonstrate that arbitrary electric-field based skyrmion and meron can be conveniently generated by adjusting the oscillation direction of each dipole in the MCAD and the normal direction of the dipole array. The generated optical topologies with fully controllable degrees of freedom provide potential applications in optical information processing, transmission, and storage. [ABSTRACT FROM AUTHOR]

In this study, the mathematical model through incommensurate fractionalorder differential equations in Caputo meaning are presented for timedependent variables given as the numerical aperture, critical angle, and acceptance angle characteristics of a fiber optic cable with electro-optical cladding. The qualitative analysis including the existence and stability of the equilibrium points of the proposed model has been made according to the used parameters, and then, the results obtained from this analysis are supported through numerical simulations by giving the possible values that can be obtained from experimental studies to these parameters in the model. In this way, a stable equilibrium point of the system for the core refractive index, cladding refractive index and electrical voltage is obtained according to the threshold parameter. Thus, the general formulas for the critical angle, acceptance angle and numerical aperture have been obtained when this fixed point is stable. [ABSTRACT FROM AUTHOR]

Analogous to the Poincaré sphere, a hybrid order Poincaré sphere is used to represent the ellipse field singularities (C-points). We study the tight focusing properties of generic bright and dark hybrid order Poincaré sphere beams in the presence of primary coma. The role of the polarization singularity index and handedness of the polarization of the hybrid order Poincaré sphere beams on the focused structure has been discussed. Results have been presented for the total intensity, component intensities, and component phase distributions for left- and right-handed bright and dark star and lemon types singularities. The presence of primary coma distorted the focal plane intensity distributions for both positive and negative index generic C-points. Coma is known to disturb the circular symmetry of the focal plane intensity distribution. Similarly in tight focusing polarization is known to disturb the symmetry. Therefore, a beam with structured and inhomogeneous polarization distribution tightly focused under the influence of coma is a fit case to study. It is found that the presence of primary coma aberration in the focusing system produces a positional shift of the high-intensity peaks and a reduction of the intensity on one side of the center. As the strength of the primary coma increases, the focal plane intensity distributions shift more and more toward the right from the initial position. Unlike the scalar vortex case, in the case of hybrid order Poincaré sphere beams, the focal plane intensity distribution undergoes rotation, as the helicity of the hybrid order Poincaré sphere beams is inverted, in addition to shifting. All the component phase distributions are found to be embedded with phase vortices of charge ± 1 . [ABSTRACT FROM AUTHOR]

Due to high durability, scratch resistance, and impact resistance, Gorilla glasses are a popular choice for protective screens of smartphones, tablets, and laptops. Precise cutting of Gorilla glasses is very important to maintain the overall aesthetics and user experience, which is very challenging. We demonstrated for the first time the cutting of Gorilla glass by means of femtosecond laser filamentation technique. To achieve laser filamentation, a femtosecond laser beam was focused and irradiated in different depths of the sample Gorilla glasses. The filament length varied with the change in the focus position of the laser beam. The effective numerical aperture of the objective lens rises due to the presence of dielectric material (i.e., the Gorilla glass itself) before the focus position of the femtosecond laser beam inside the glass samples. As a consequence, the focal distance of the incident laser beam was prolonged and focused in a very tiny spot with extremely high energy density. Consequently, filaments (i.e., high aspect ratio micro-voids) were evident inside the Gorilla glass samples. The filament length is controllable by changing the irradiation parameters of the laser beam, including magnification and numerical aperture of the lens, laser energy, and thickness of the Gorilla glass before the target focal point. The filament-engraved Gorilla glass samples go through mechanical cleaving process with 400 MPa pressure on both sides of the laser scanning line for smooth cutting of Gorilla glass. The proposed glass cutting technique show promises for commercial application. [ABSTRACT FROM AUTHOR]

The strong interaction of light with micro- and nanostructures plays a critical role in optical sensing, nonlinear optics, active optical devices, and quantum optics. However, for wavefront shaping, the required local control over light at a subwavelength scale limits this interaction, typically leading to low-quality-factor optical devices. Here, we demonstrate an avenue towards high-quality-factor wavefront shaping in two spatial dimensions based on all-dielectric higher-order Mie-resonant metasurfaces. We design and experimentally realize transmissive band stop filters, beam deflectors and high numerical aperture radial lenses with measured quality factors in the range of 202–1475 at near-infrared wavelengths. The excited optical mode and resulting wavefront control are both local, allowing versatile operation with finite apertures and oblique illumination. Our results represent an improvement in quality factor by nearly two orders of magnitude over previous localized mode designs, and provide a design approach for a new class of compact optical devices. Wavefront manipulation with metasurfaces is typically limited to low quality factors. Here, the authors show how higher-order Mie modes can be leveraged to design high quality factor optical metasurfaces for wavefront manipulation in two dimensions. [ABSTRACT FROM AUTHOR]

We demonstrated an optimization of a picosecond fiber amplifier based on Yb-doped tapered fiber in a spectral range of 1030 nm. Nonlinear effects limiting peak power scaling (stimulated Raman scattering and four-wave mixing) were studied and factors affecting their threshold were established, such as gain, diameter profile along the length of taper, output mode field diameter, and numerical aperture of a pump. By determining the optimal amplification regime and manufacturing advanced tapered fibers, we amplified 13 ps pulses to a record-high peak power of 1 MW at a wavelength of 1029 nm directly at the output of the fiber at an average power of 13.8 W. Four-wave mixing was the limiting factor, and the total fraction of deleterious components in the output spectrum was ~2%. The quality of the output beam was close to being diffraction limited (M2 < 1.2). [ABSTRACT FROM AUTHOR]

Double-clad optical fiber with a multi-ring core profile doped with thulium and holmium fabricated by Modified Chemical Vapor Deposition Chelate Doping Technology (MCVD-CDT) is presented. The measured Tm2O3 and Ho2O3 complexes' weight concentrations were 0.5% and 0.2% respectively. Numerical analyses show weakly guiding conditions and 42.2 µm of MFD LP01 at 2000 nm. The low NA numerical aperture (NA = 0.054) was obtained for the 20/250 µm core/cladding ratio optical fiber construction. The emission spectra in the range of 1.6–2.1 µm vs. the fiber length are presented. The full width at half maximum (FWHM) decreases from 318 to 270 nm for fiber lengths from 2 to 10 m. The presented fiber design is of interest for the development of new construction of optical fibers operating in the eye-safe spectral range. [ABSTRACT FROM AUTHOR]

Digital holographic microscopy (DHM) is a valuable technique for investigating the optical properties of samples through the measurement of intensity and phase of diffracted beams. However, DHMs are constrained by Lagrange invariance, compromising the spatial bandwidth product (SBP) which relates resolution and field of view. Synthetic aperture DHM (SA-DHM) was introduced to overcome this limitation, but it faces significant challenges such as aberrations in synthesizing the optical information corresponding to the steering angle of incident wave. This paper proposes a novel approach utilizing deep neural networks (DNNs) for compensating aberrations in SA-DHM, extending the compensation scope beyond the numerical aperture (NA) of the objective lens. The method involves training a DNN from diffraction patterns and Zernike coefficients through a circular aperture, enabling effective aberration compensation in the illumination beam. This method makes it possible to estimate aberration coefficients from the only part of the diffracted beam cutoff by the circular aperture mask. With the proposed technique, the simulation results present improved resolution and quality of sample images. The integration of deep neural networks with SA-DHM holds promise for advancing microscopy capabilities and overcoming existing limitations. [ABSTRACT FROM AUTHOR]

Optical metasurfaces performing analog image processing – such as spatial differentiation and edge detection – hold the potential to reduce processing times and power consumption, while avoiding bulky 4 F lens systems. However, current designs have been suffering from trade-offs between spatial resolution, throughput, polarization asymmetry, operational bandwidth, and isotropy. Here, we show that dispersion engineering provides an elegant way to design metasurfaces where all these critical metrics are simultaneously optimized. We experimentally demonstrate silicon metasurfaces performing isotropic and dual-polarization edge detection, with numerical apertures above 0.35 and spectral bandwidths of 35 nm around 1500 nm. Moreover, we introduce quantitative metrics to assess the efficiency of these devices. Thanks to the low loss nature and dual-polarization response, our metasurfaces feature large throughput efficiencies, approaching the theoretical maximum for a given NA. Our results pave the way for low-loss, high-efficiency and broadband optical computing and image processing with free-space metasurfaces. Here the authors demonstrate a path to design metasurfaces that perform broadband, high-NA, high-efficiency and dual-polarization edge detection without using bulky 4 f systems. This work introduces new approaches towards passive, ultra-compact optical computing and image processing. [ABSTRACT FROM AUTHOR]