Search

We experimentally demonstrate an O-band single-lane 200 Gb/s intensity modulation direct detection (IM/DD) transmission system using a low-chirp, broadband, and high-power directly modulated laser (DML). The employed laser is an isolator-free packaged module with over 65-GHz modulation bandwidth enabled by a distributed feedback plus passive waveguide reflection (DFB+R) design. We transmit high baud rate signals over 20-km standard single-mode fiber (SSMF) without using any optical amplifiers and demodulate them with reasonably low-complexity digital equalizers. We generate and detect up to 170 Gbaud non-return-to-zero on-off-keying (NRZ-OOK), 112 Gbaud 4-level pulse amplitude modulation (PAM4), and 100 Gbaud PAM6 in the optical back-to-back configuration. After transmission over the 20-km optical-amplifier-free SSMF link, up to 150 Gbaud NRZ-OOK, 106 Gbaud PAM4, and 80 Gbaud PAM6 signals are successfully received and demodulated, achieving bit error rate (BER) performance below the 6.25%-overhead hard-decision (HD) forward-error-correction code (FEC) limit. The demonstrated results show the possibility of meeting the strict requirements towards the development of 200Gb/s/lane IM/DD technologies, targeting 800Gb/s and 1.6Tb/s LR applications.

Changes in the footballing world’s approach to technology and innovation, along with major advancements in broadcasting contributed to the decision by the International Football Association Board to introduce Video Assistant Referees in 2018. The change meant that under strict protocols referees could use video replays to review decisions in the event of a “clear and obvious error” or a “serious missed incident”. At the time of writing 48-Member Associations have introduced the Video Assistant Referees protocol in at least one of their tournaments and there are many technology providers who work with organisers to implement the Video Assistant Referees systems. To ensure that the use of Video Assistant Referees has a positive effect on the game, Fédération Internationale de Football Association collaborated with the RISE Research Institutes of Sweden to develop objective test methods that could be used to ensure that a system can provide an adequate solution. Each provider must be able to pass requirements that ensure that they can deal with the challenges of processing, coding, decoding, synchronising, and re-formatting of the broadcast feeds. This article will describe the development of the test methods and illustrate some initial results from a test event on Video Assistant Referees system candidates. The methods have shown to be robust and appropriate for their intended purpose and will be developed over the years to ensure the quality of Video Assistant Referees. The developed measurement methods are general and can be applied to other broadcast and video systems as well as to other sports.

Accurate and efficient anomaly detection is a key enabler for the cognitive management of optical networks, but traditional anomaly detection algorithms are computationally complex and do not scale well with the amount of monitoring data. Therefore, we propose an optical spectrum anomaly detection scheme that exploits computer vision and deep unsupervised learning to perform optical network monitoring relying only on constellation diagrams of received signals. The proposed scheme achieves 100% detection accuracy even without prior knowledge of the anomalies. Furthermore, operation with encoded images of constellation diagrams reduces the runtime by up to 200 times.

The article analyzes the total cost of ownership (TCO) of 5G fronthauling solutions based on analog and digital radio-over-fiber (RoF) architectures in cloud radio access networks (C-RANs). The capital and operational expenditures (CAPEX, OPEX) are assessed, for a 10-year period, considering three different RoF techniques: intermediate frequency analog RoF (IF-A-RoF), digital signal processing (DSP) assisted analog RoF (DSP-A-RoF), and digital RoF (D-RoF) based on the common public radio interface (CPRI) specifications. The greenfield deployment scenario under exam includes both fiber trenching (FT) and fiber leasing (FL) options. The TCO is assessed while varying (i) the number of aggregated subcarriers, (ii) the number of three-sector antennas located at the base station, and (iii) the mean fiber-hop length. The comparison highlights the significance that subcarrier aggregation has on the cost efficiency of the analog RoF solutions. In addition, the analysis details the contribution of each cost category to the overall CAPEX and OPEX values. The obtained results indicate that subcarrier aggregation via DSP results in high cost efficiency for a mobile fronthaul network, while a CPRI-based architecture together with FL brings the highest OPEX value.

High bitrate mid-infrared links using simple (NRZ) and multi-level (PAM-4) data coding schemes have been realized in the 8 µm to 14 µm atmospheric transparency window. The free space optics system is composed of unipolar quantum optoelectronic devices, namely a continuous wave quantum cascade laser, an external Stark-effect modulator and a quantum cascade detector, all operating at room-temperature. Pre- and post-processing are implemented to get enhanced bitrates, especially for PAM-4 where inter-symbol interference and noise are particularly detrimental to symbol demodulation. By exploiting these equalization procedures, our system, with a full frequency cutoff of 2 GHz, has reached transmission bitrates of 12 Gbit/s NRZ and 11 Gbit/s PAM-4 fulfilling the 6.25 % overhead hard-decision forward error correction threshold, limited only by the low signal-to-noise ratio of our detector.

An approach for simultaneous modulation format identification (MFI) and optical signal-to-noise ratio (OSNR) monitoring in digital coherent optical communications is proposed based on optoelectronic reservoir computing (RC) and the signal’s amplitude histograms (AHs) obtained after the adaptive post-equalization. The optoelectronic RC is implemented using a Mach-Zehnder modulator and optoelectronic delay feedback loop. We investigate the performance of the proposed model with the number of symbols, bins of AHs and the hyperparameters of optoelectronic RC. The results show that 100% MFI accuracy can be achieved simultaneously with accurate OSNR estimation for different modulation formats under study. The lowest achievable OSNR estimation mean absolute errors for the dual-polarization (DP)-quadrature phase-shift keying signal, the DP-16-ary quadrature amplitude modulation (16QAM) signal, and the DP-64QAM signal are 0.2 dB, 0.32 dB and 0.53 dB, respectively. The robustness of the proposed scheme is also evaluated when the optoelectronic RC is in presence of additive white Gaussian noises. Then, a proof of concept experiment is demonstrated to further verify our proposed method. The proposed approach offers a potential solution for next-generation intelligent optical performance monitoring in the physical layer.

Robustness against the large linewidth semiconductor laser-induced impairments in coherent systems is experimentally demonstrated for a feedforward neural network-enabled EVM estimation scheme. A mean error of 0.4% is achieved for 28 Gbaud square and circular QAM signals and linewidths up to 12.3 MHz.

To support massive deployment of broadband radio applications, such as 5G and high-definition videos for terrestrial televisions, large system capacity and high spectrum efficiency are highly demanded in radio over fiber (RoF) systems. In this article, we propose a terabit digital RoF system capable of providing high-speed transmission, where multicore fiber (MCF) is introduced for the access segment between the central unit and remote unit. Two key technologies that greatly enhance system capacity and spectrum efficiency, namely MCF enabled self-homodyne detection and compressed quantization, are demonstrated.

We experimentally demonstrate the generation of 107-Gbit/s net-rate optical discrete multitone signal using a 1.5- μ m single-mode vertical cavity surface emitting laser (VCSEL) with modulation bandwidth of 22 GHz. Utilizing a nonlinearity-tolerant channel equalization algorithm for digital signal processing, total net-rates of 726.6-Gbit/s over 2.5-km dispersion-uncompensated 7-core fiber and 533.1-Gbit/s over 10-km dispersion-compensated 7-core fiber below 7% overhead hard-decision forward error correction limit have been experimentally achieved with a 1.5- μ m VCSEL-based intensity-modulation direct-detection system. The features of the 1.5- μ m single-mode VCSEL, 2.5-km/10-km multi-core fibers, and fan-in/fan-out modules are presented. Besides, the Volterra series-based nonlinearity-tolerant channel equalization algorithm, which improves the signal-to-noise ratio with more than 5 dB, is mathematically described and experimentally validated. The results have demonstrated that 1.5- μ m single-mode VCSEL and multi-core-fiber-based transmission can be a promising candidate to solve the capacity challenges in short-reach optical interconnects.

Current perception and monitoring systems, such as human recognition, are affected by several environmental factors, such as limited light intensity, weather changes, occlusion of targets, and public privacy. Human recognition using radar signals is a promising direction to overcome these defects; however, the low signal-to-noise ratio of radar signals still makes this task challenging. Therefore, it is necessary to use suitable tools that can efficiently deal with radar signals to identify targets. Reservoir computing (RC) is an efficient machine learning scheme that is easy to train and demonstrates excellent performance in processing complex time-series signals. The RC hardware implementation structure based on nonlinear nodes and delay feedback loops endows it with the potential for real-time fast signal processing. In this paper, we numerically study the performance of the optoelectronic RC composed of optical and electrical components in the task of human recognition with noisy micro-Doppler radar signals. A single-loop optoelectronic RC is employed to verify the application of RC in this field, and a parallel dual-loop optoelectronic RC scheme with a dual-polarization Mach–Zehnder modulator (DPol-MZM) is also used for performance comparison. The result is verified to be comparable with other machine learning tools, which demonstrates the ability of the optoelectronic RC in capturing gait information and dealing with noisy radar signals; it also indicates that optoelectronic RC is a powerful tool in the field of human target recognition based on micro-Doppler radar signals.

With the explosive growth of global wireless data traffic, the Terahertz band (0.3–10 THz) is promising for ultrafast wireless communications, due to the enormous available bandwidth [1]. Photonic generation of THz carriers displays extremely large tunable range and modulation bandwidth, making it nearly ideal for THz communications. However, the current photonics-based THz carrier generators are based on discrete bulky components [2] with high cost and energy consumption, which hinder them from practical applications. Here, we present an injection-locked heterodyne source based on generic foundry-fabricated photonic integrated circuits (PIC) attached to a photo-mixing uni-travelling carrier photodiode (UTC-PD), generating high-purity THz carriers for high-speed and long-distance wireless communication. The generated THz carrier can span from 0 to 1.4 THz, determined by the tunable wavelength spacing between the two distributed feedback (DFB) modes within the range 0-10.7 nm. We show that a generated 0.4 THz carrier transmits a record-high single-channel net rate of 131 Gbit/s over 10.7 m of wireless distance with only − 24 dBm emitted THz power, by employing 16-QAM-OFDM modulation and a nonlinear equalization technique. To the best of our knowledge, this is the highest data rate for a single-channel THz wireless transmission and requires the lowest THz power/bitrate/distance. The scheme of the monolithic dual-DFB PIC based THz generation shows a great potential for fully integrated, cost-effective and energy-efficient THz transmitters.

Space-division multiplexing (SDM) attracts attention to cladding-pumped optical amplifiers, but they suffer from a low pump power conversion efficiency. To address this issue, ytterbium (Yb3+) and erbium (Er3+) co-doping is considered as an effective approach. However, it changes the gain profile of Er3+-doped fiber amplifiers and induces the gain difference between optical wavelengths in the C-band, significantly limiting the effective band of the dense wavelength-division multiplexed (DWDM) system. This paper is devoted to a detailed study of a cladding-pumped Er3+/Yb3+ co-doped fiber amplifier (EYDFA) through numerical simulations aiming to identify a configuration, before assembling a similar EYDFA in our laboratory premises that ensures the desired performance. The simulation model is based on a commercial double cladding EYDF whose parameters are experimentally extracted and fed to the EYDFA setup for the system-level studies. We investigate the wavelength dependence of the amplifier’s characteristics (absolute gain, gain uniformity, noise figure) and bit error rate (BER) performance for several DWDM channels and their optical power. The obtained results show that a 7 m long EYDF and co-propagating pump direction is preferable for the EYDFA with a 3 W pump source at 975 nm and with the given gain medium characteristics for WDM applications. For instance, it ensures a gain of 19.7–28.3 dB and a noise figure of 3.7–4.2 dB when amplifying 40 DWDM channels with the input power of −20 dBm per channel. Besides, we study EYDFA gain bandwidth and the maximum output power when operating close to the saturation regime and perform a sensitivity analysis showing how the doped fiber’s absorption and emission cross-sections impact the amplification process through energy transfer from Yb3+ to Er3+. Finally, we quantify the power penalty introduced by the EYDFA; the results show that it is not higher than 0.1 dB when amplifying 40 × 10 Gbps non-return-to-zero on-off keying signals from −20 dBm/channel.---//---This work is licensed under a CC BY 4.0 license., This work has been supported by the European Regional Development Fund project No.1.1.1.1/18/A/068. The Institute of Solid State Physics, University of Latvia as a Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.

While infrastructure providers are expanding their portfolio to offer sustainable solutions for beyond 10 Gbps in the access segment of optical networks, we experimentally compare several modulation format alternatives for future passive optical networks (PONs) aiming to deliver 25+ Gbps net-rates. As promising candidates, we consider the intensity modulation direct detection (IM/DD) schemes such as electrical duobinary (EDB) and 4-level and 8-level pulse amplitude modulations (PAM-4/8). They are more spectrally efficient than the conventional non-return-to-zero on-off-keying (NRZ-OOK) used in current 10G PONs. As we move to higher rates, digital equalization enhances the performance by smoothening the systems imperfection. However, the impact that such equalization has on the optical power budget remains unclear. Therefore, in this article, we fairly compare the optical power budget values of a time division multiplexed PON (TDM-PON) exploiting a linear digital signal equalization at the receiver side. We consider the conventional PON configuration (20 km of single-mode fiber (SMF), 1:N optical power splitting) with IM/DD and net-rates above 25 Gbps. Furthermore, we focus on a downstream transmission imposing the bandwidth limitations of 10G components using a digital filter before the detection. The obtained results show that the use of a digital post-equalization with 43 feed-forward (FF) and 21 feedback (FB) taps can significantly improve the signal quality enabling new alternatives and enhancing the optical power budget.

For coupled linear cavity-random fiber Raman lasers, for the first time, to the best of our knowledge, we demonstrate a new mechanism of emergence of the random pulses, with the anomalous statistics satisfying optical rogue waves’ criteria experimentally. The rogue waves appear as a result of the coupling of two Raman cascades, namely, a linear cavity laser with a wavelength of 1.55 µm and a random laser with a wavelength nearly 1.67 µm, along with coupling of the orthogonal states of polarization (SOPs). The coherent coupling of SOPs causes localization of the trajectories in the vicinity of these states, whereas polarization instability drives escape taking the form of chaotic oscillations. Antiphase dynamics in two cascades result in the suppression of low amplitude chaotic oscillations and enable the anomalous spikes, satisfying rogue waves criteria.

© 2020 by the authors., We present a theoretical and experimental investigation of unrepeatered transmission over standard single-mode fiber (SMF-28) using several schemes of distributed Raman amplification, including first, second, and dual order. In order to further extend the transmission distance, we utilize advanced bidirectional higher-order ultra-long Raman fiber laser-based amplification, where we use fiber Bragg gratings (FBGs) to reflect Stokes-shifted light from the secondary pumps. Our work demonstrates the possibility of transmission up to 240-km span length with a total span loss of 52.7 dB. Here, we use a 28-Gbaud signal using a 64-quadrature amplitude modulation (QAM) modulation format. Our results highlight the contribution of nonlinear compensation using digital back propagation in a digital signal processor (DSP) code at the receiver., This work was funded by MSCA IF grant SIMFREE (No. 748767), Swedish Research Council (VR) project PHASE (2016-04510), the People Program of the European Union FP7 under grant (608099) and project GRIFFON (324391), Spanish MINECO grant TEC2015-71127-C2 and Spanish MICINN grant RTI2018-097957-B-C33, Comunidad de Madrid grant S2018/NMT-4326 SINFOTON2-CM, Swedish VINNOVA-funded project Center for Software-Defined Optical Networks (no. 2017-01559), and UK EPSRC program grant PHOS (EP/S003436/1).

Error vector magnitude (EVM) has proven to be one of the optical performance monitoring metrics providing the quantitative estimation of error statistics. However, the EVM estimation efficiency has not been fully exploited in terms of complexity and energy consumption. Therefore, in this paper, we explore two deep-learning-based EVM estimation schemes. The first scheme exploits convolutional neural networks (CNNs) to extract EVM information from images of the constellation diagram in the in-phase/quadrature (IQ) complex plane or amplitude histograms (AHs). The second scheme relies on feedforward neural networks (FFNNs) extracting features from a vectorized representation of AHs. In both cases, we use short sequences of 32 Gbaud m-ary quadrature amplitude modulation (mQAM) signals captured before or after a carrier phase recovery. The impacts of the sequence length, neural network structure, and data set representation on the EVM estimation accuracy as well as the model training time are thoroughly studied. Furthermore, we validate the performance of the proposed schemes using the experimental implementation of 28 Gbaud 64QAM signals. We achieve a mean absolute estimation error below 0.15%, with short signals consisting of only 100 symbols per IQ cluster. Considering the estimation accuracy, the implementation complexity, and the potential energy savings, the proposed CNN- and FFNN-based schemes can be used to perform time-sensitive and accurate EVM estimation for mQAM signal quality monitoring purposes.

We report on a 116 Gb/s on-off keying (OOK), four pulse amplitude modulation (PAM) and 105-Gb/s 8-PAM optical transmitter using an InP-based integrated and packaged externally modulated laser for high-speed optical interconnects with up to 30 dB static extinction ratio and over 100-GHz 3-dB bandwidth with 2 dB ripple. In addition, we study the tradeoff between power penalty and equalizer length to foresee transmission distances with standard single mode fiber.

We experimentally evaluate high-speed intensity modulation/direct detection (IM/DD) transmissions with a 1.55- $\mu \text{m}$ broadband electro-absorption modulated laser and pulse amplitude modulations (PAM). We demonstrate 80 Gb/s/ $\lambda $ PAM-4 and 96 Gb/s/ $\lambda $ PAM-8 transmissions with low-complexity digital equalizers at the receiver. Performance comparison with different types of equalizers are performed, including linear symbol-spaced feed-forward equalizer (FFE), fractional (half-symbol) spaced FFE and decision feedback equalizer (DFE), with different tap number. It is found that for both cases, a 6-tap symbol-spaced FFE is sufficient to achieve a stable performance with bit-error-rate below the 7% overhead hard decision forward error correction (7%-OH HD-FEC) threshold over a 4 km standard single mode fiber link. Practical considerations including comparison between adaptive and static equalizer implementation and tolerable fiber chromatic dispersion are discussed.

Nonlinear impairments induced by the opto-electronic components are one of the fundamental performance-limiting factors in high-speed optical short-reach communications, significantly hindering capacity improvement. This paper proposes to employ a kernel mapping function to map the signals in a Hilbert space to its inner product in a reproducing kernel Hilbert space, which has been successfully demonstrated to mitigate nonlinear impairments in optical short-reach communication systems. The operation principle is derived. An intensity modulation/direct detection system with 1.5-mu m vertical cavity surface emitting laser and 10-km 7-core fiber achieving 540.68-Gbps (net-rate 505.31-Gbps) has been carried out. The experimental results reveal that the kernel mapping based schemes are able to realize comparable transmission performance as the Volterra filtering scheme even with a high order. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

107.1- and 93.9-Gbps net-rate (gross-rate 133.9- and 101.3-Gbps) OFDM transmission on a 408-GHz carrier frequency is experimentally demonstrated over a joint fiber-wireless link, 51-km single-mode fiber and 10.7-m free-space, with bit-errorrates below the 20% soft- and 7% hard-decision FEC thresholds of 2.7×10 -2 and 3.8×10 -3 , respectively.

We propose a novel kernel affine projection (KAP) algorithm, which combines kernel mapping and affine projection for channel equalization in optical direct detection systems. Experimental results show that the KAP algorithm can mitigate nonlinear impairments in short-reach communications while maintaining low computational complexity.

By using a monolithically integrated dualdistributed feedback (DFB) laser chip attached to a photomixing uni-travelling carrier photodiode (UTC-PD) with a THz antenna, single-channel THz photonic-wireless transmission system with a net rate of 131 Gbit/s over a wireless distance of 10.7 m has been achieved.

All parts of an IM/DD system are being stretched to the limit as the single lane data rate approaches 200 Gbps and beyond. We report the recent developments on the key enablers conquering this target.&nbsp

International audience; Silicon photonics is a promising solution for next generation of short-range optical communication systems. Silicon modulators have driven an important research activity over the past years, and many transmission links using on-off keying modulation format (OOK) were successfully demonstrated with a large diversity of modulator structures. In order to keep up with the demand of increasing bitrates for limited bandwidths in Datacom applications, higher modulation formats are explored, such as quadrature phase shift keying (QPSK) or 4-level pulse amplitude modulation (PAM-4). However, driving the modulators to generate PAM-4 signals commonly require expensive and power-hungry electronic devices such as digital-to-analog converters (DACs) for pulse-shaping and digital signal processors (DSP) for non-linearity compensation. Lastly, new solutions were studied to overcome this issue, including new driving methods based on the use of two different input binary sequences applied directly on the modulator. While most of the reported works are focused on the C-band of communication, the O-band can present a definitive advantage due to the low dispersion of standard single-mode (SSMF) fiber. For those reasons, we demonstrate the generation of a 10-Gbaud DAC-less PAM-4 signal in the O-band using a depletion-based silicon traveling wave Mach-Zehnder modulator (TWMZM). An open eye diagram was obtained, and a bit error rate (BER) of 3.810-3 was measured for a received optical power of about-6 dBm.

In this work, we demonstrate reconfigurable frequency manipulation of quantum states of light in the telecom C-band. Triggered single photons are encoded in a superposition state of three channels using sidebands up to 53 GHz created by an off-the-shelf phase modulator. The single photons are emitted by an InAs/GaAs quantum dot grown by metal-organic vapor-phase epitaxy within the transparency window of the backbone fiber optical network. A cross-correlation measurement of the sidebands demonstrates the preservation of the single photon nature; an important prerequisite for future quantum technology applications using the existing telecommunication fiber network., Comment: Samuel Gyger and Katharina D. Zeuner contributed equally

We experimentally demonstrate 276-Gbps net rate 128QAM-DMT transmission at soft-FEC limit in an IM/DD system with a single C-band packaged EML, a DAC and a photo-detector, proposing a lattice pilot algorithm for channel equalization with only 1% overhead reaching spectral efficiency of 5.82-bits/Hz per lane.

The transformation of datacentres to support the increasing traffic growth requires the development of new technologies to migrate to 1.6T optical transceivers and to ultra-fast high radix optical space switches. In this work, an outline of the technological perspectives of TWILIGHT project is provided in accordance with research updates and industry standards.

We summarize our recent research works on enabling coherent optical transmission systems for metro and access networks with low-complexity digital signal processing techniques, focusing on reduction of laser linewidth requirement with efficient carrier phase recovery. QC 20190917

A 107Gb/s net-rate DMT optical signal was generated using a single-mode long-wavelength VCSEL with a modulation bandwidth of 23GHz. We experimentally demonstrated a total net-rate up to 726.7Gb/s at 1.5 mu m over 2.5km 7-core dispersion-uncompensated MCF.

We experimentally demonstrate a 28-Gbaud 16-QAM self-homodyne digital radio-over- 33.6km-7-core-fiber system with entropy coding for mobile fronthaul, achieving error-free carrier aggregation of 330 100-MHz 4096-QAM 5G-new-radio channels and 921 100-MHz QPSK 5G-new-radio channels with CPRI-equivalent data rate up to 3.73-Tbit/s., Comment: 3 pages, 44th European Conference on Optical Communication (ECOC 2018), Rome, Italy, 2018