Search

Selenium-containing polystyrene (DSe-PS) microspheres were synthesized by soap-free emulsion polymerization using 1,2-bis(2,3,5,6-tetrafluoro-4-vinylphenyl)diselane (FVPDSe) and divinylbenzene (DVB) as crosslinking agents. The particle size of the obtained DSe-PS was characterized by a scanning electron microscope and dynamic light scattering. The results showed that the diameter of the obtained DSe-PS microspheres could be adjusted by changing the ratio of the monomer and crosslinker/water. The diselenide moiety in the obtained DSe-PS microspheres could be oxidized to seleninic acid by H2O2 which can catalyze the oxidation of acrolein. The oxidized DSe-PS microspheres exhibited higher catalytic activity and selectivity to methyl acrylate in a model oxidation of acrolein. [ABSTRACT FROM AUTHOR]

Fabrication of versatile hydrogels in a facile and effective manner represents a pivotal challenge in the field of biomaterials. Herein, a novel strategy is presented for preparing on‐demand degradable hydrogels with multilevel responsiveness. By employing selenol‐dichlorotetrazine nucleophilic aromatic substitution (SNAr) to synthesize hydrogels under mild conditions in a buffer solution, the necessity of additives or posttreatments can be obviated. The nucleophilic and redox reactions between selenol and tetrazine culminate in the formation of three degradable chemical bonds—diselenide, aryl selenide, and dearomatized selenide—in a single, expeditious step. The resultant hydrogel manifests exceptional adaptability to intricate environments in conjunction with self‐healing and on‐demand degradation properties. Furthermore, the resulting material demonstrated light‐triggered antibacterial activity. Animal studies further underscore the potential of integrating metformin into Se‐Tz hydrogels under green light irradiation, as it effectively stimulates angiogenesis and collagen deposition, thereby fostering efficient wound healing. In comparison to previously documented hydrogels, Se‐Tz hydrogels exhibit controlled degradation and drug release, outstanding antibacterial activity, mechanical robustness, and bioactivity, all without the need for costly and intricate preparation procedures. These findings underscore Se‐Tz hydrogels as a safe and effective therapeutic option for diabetic wound dressings. [ABSTRACT FROM AUTHOR]

Stimuli-responsive functional gels have shown significant potential for application in biosensing and drug release systems. In this study, aggregation-induced emission luminogen (AIEgen)-functionalized, diselenide-crosslinked polymer gels were synthesized via free radical copolymerization. A series of polymer gels with different crosslink densities or tetraphenylethylene (TPE) contents were synthesized. The diselenide crosslinker in the gels could be fragmented in the presence of H2O2 or dithiothreitol (DTT) due to its redox-responsive property. Thus, the TPE-containing polymer chains were released into the aqueous solution. As a result, the aqueous solution exhibited enhanced fluorescence emission due to the strong hydrophobicity of TPE. The degradation of polymer gels and fluorescence enhancement in an aqueous solution under different H2O2 or DTT concentrations were studied. Furthermore, the polymer gels could be used as drug carriers, suggesting a visual drug release process under the action of external redox agents. The AIEgen-functionalized, diselenide-crosslinked polymer gels hold great potential in the biomedical area for biosensing and controlled drug delivery. [ABSTRACT FROM AUTHOR]

[Display omitted] • Obtained polymer with alkyl C Se bond has similar transparency with polystyrene (PS), higher the refractive index than PS and comparable thermostability with PS. • The pattern is directly visual under natural light without any extra treatments and the reaction condition of photo-corsslinking does not require photoacid, photoinitiator and other agents. • The obtained pattern has excellent solution resistance, duo to its cross-linked structure. • The pattern keeps a smooth surface without deformation, which avoides its distortion. To investigate the complexity of breaking aryl C Se bond, alkyl C Se bond and alkyl C S bond by ultraviolet light, three maleimide polymers are employed as objects, including SePhP which reported in our previous work having aryl C Se bond, SePP which synthesized via radical copolymerization of N -(4-selenophenyl)-propyl maleimide and styrene having alkyl C Se bond and SPP which synthesized via radical copolymerization of N -(4-thiophenyl)-propyl maleimide and styrene having alkyl C S bond. After careful structure characteristics, SePhP, SePP and SPP are treated by ultraviolet light, as a result, only C Se bond of SePP can be broken. When SePP is irradiated by ultraviolet light in an oxygen-free condition, it can make a structure change from linear to cross-linked and refractive index decrease of polymer. Furthermore, utilizing photo-crosslinking and changing of refractive index of SePP after ultraviolet light irradiation, we realize visual photomask patterning in a simple system, which will bring great potential in display devices, anti-counterfeit labels, and etc. [ABSTRACT FROM AUTHOR]

Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO). Vinyl 2-[(ethoxycarbonothioyl) sulfanyl] propanoate (ECTVP) was used as polymerizable chain transfer agent. Living polymerization behavior was proved via pseudo linear kinetics, the molecular weight of polymers increasing with conversion and successful chain extension. The structure of polymers was characterized by 1H NMR spectroscopy, tripe detection gel permeation chromatography, and differential scanning calorimetry. The polymer composition was shown to be able to tune to vary the amount of ester repeat units in the polymer backbone, and hence determine the degree of branching. As expected, the degree of crystallinity was lower and the rate of degradation was faster in cases of increasing the number of branches. [ABSTRACT FROM AUTHOR]

This work developed novel selenium-containing polyimides with a high intrinsic refractive index. Four polyimides with different selenium contents and repeat unit structures were designed and synthesized via amine-dianhydride polycondensation of one of two diamines, i.e., 4,4′-oxydianiline or bis(4-aminophenyl)selanide, with one of two dianhydrides, i.e., bis(4-(3,4-dicarboxylbenzoyloxy)phenyl) ester dianhydride or 1,1′-bis(4-(3,4-dicarboxylbenzoyloxy)phenyl) selenide dianhydride. Various techniques, e.g., nuclear magnetic resonance, Fourier transformed infrared spectroscopy, and wide-angle X-ray diffraction, were used to characterize the polymers’ structures. Differential scanning calorimetry, thermogravimetric analysis, ultraviolet-visible spectroscopy, and spectroscopic ellipsometry were used to characterize the properties of the polymers. The selenium contents showed a positive effect on the refractive index of the final polymer. In addition, the refractive index can reach up to 1.968 at 633 nm, which was the highest intrinsic refractive index of a polyimide ever reported. Because of the high intrinsic refractive index, the reflective ratio of visible light on the surface of a silicon wafer was significantly reduced, indicating the potentially utility of the polymer in an anti-reflection coating. [ABSTRACT FROM AUTHOR]

Selenium-containing monomer monophenyl maleimide selenide (MSM) was synthesized and copolymerized with styrene (St) using reversible addition-fragmentation chain transfer (RAFT) polymerization. Copolymers with controlled molecular weight and narrow molecular weight distribution were obtained. The structure of the copolymer was characterized by nuclear magnetic resonance, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrum, Fourier transform infrared spectroscopy (FT-IR) and Ultraviolet-visible spectroscopy (UV-vis) spectroscopy. The copolymer can be oxidized byH2O2 to form carbon-carbon double bonds within the main chain due to the unique sensitivity of selenide groups in the presence of oxidants. Such structure changing resulted in an interesting concentration-related photoluminescence emission enhancement. [ABSTRACT FROM AUTHOR]

[Display omitted] • First microflow cationic polymerization under ambient conditions. • No further purification of all reagents were required. • Well-defined poly(vinyl ether)s can be achieved within 2 min. Living cationic polymerization is a well-established method for preparing polymers with controlled molecular weights and complex architectures, but rigorous polymerization conditions limit its widespread application. Here, we report a facile strategy for simplifying the strict conditions required for traditional living cationic polymerizations of various vinyl ethers including ethyl vinyl ether (EVE), propyl vinyl ether (PVE), butyl vinyl ether (BVE) and isobutyl vinyl ether (IBVE) by utilizing continuous microflow reactors and a weak Lewis acid, zinc chloride (ZnCl 2). Well-defined polymers with controlled molecular weights and narrow molecular weight distributions (<1.20) can be obtained under ambient conditions without monomer purification, temperature control or strictly anhydrous conditions. The living nature of the polymerization was verified by kinetic experiments and successful in situ chain extension. [ABSTRACT FROM AUTHOR]

Ring-opening copolymerization (ROCOP) is an effective means to prepare functionalized polyester. In this work, a type of selenide-containing polyesters with controllable structure, molecular weight, and molecular weight distribution was successfully prepared by ROCOP of γ-selenobutyrolactone and epoxy compounds. The influence of the catalyst, solvent, and reaction temperature on the reaction efficiency was examined. Then, kinetic study was investigated under an optimized condition. The structure of the copolymers was carefully characterized by nuclear magnetic resonance (NMR), 1H NMR, 13C NMR, and 77Se NMR, Matrix-assisted laser-desorption-ionization time-of-flight mass spectrometry (MALDI-TOF-MS), and size exclusion chromatography (SEC). The resulting polymers showed a linear structure with a sequence regulated backbone repeating unit of ester-selenide. On this basis, some typical epoxides were investigated to verify the scope of the polymerization system. Due to the "living"/controlled characteristics of this ROCOP, multiblock, amphiphilic, and stereotactic copolymers could be prepared with a pre-designed structure. As expected, the selenide-containing amphiphilic copolymer could self-assemble to micelles and showed an oxidative response. [ABSTRACT FROM AUTHOR]

• High refractive index polyimides with as high as more than 1.8 of RI value were developed. • Solubility was greatly improved realizing the use of easy processing method. • PI showed high-low-high cycles of RI in film state under redox condition. Soluble high refractive index polyimides have extensive applications in optical devices due to their ease of processing and versatility. In this work, selenide-containing polyimides were designed and synthesized via amine-dianhydride polycondensation. Two selenide containing diamines, e.g. bis(3-trifluoromethyl-4-aminophenyl)selenide (BTFAPS) and bis(4-aminophenyl)selenide (BAPS) were reacted with 4,4′-(Hexafluoroisopropylidene)diphthalic anhydride (6FDA) for the preparation of selenide containing polyimides. Comparison with its oxygen and sulfur counterparts, the selenide-containing PIs have better solubility, higher refractive index, and can bring redox responsiveness. This is due to the trifluoromethyl base, which possesses a large free volume, and the selenium element, which has a higher molar refraction and redox activities than even sulfur. Various techniques, such as nuclear magnetic resonance, gel permeation chromatography, Fourier transformed infrared spectroscopy and wide angle X-ray diffraction were used for characterizing the polymers structure. Differential scanning calorimetry, thermogravimetric analysis, ultraviolet-visible spectroscopy, spectroscopic ellipsometry and X-ray photoelectron spectroscopy were used to characterize the properties of the polymers. [ABSTRACT FROM AUTHOR]

Selenide-containing amphiphilic copolymers have shown significant potential for application in drug release systems. Herein, we present a methodology for the design of a reactive oxygen species-responsive amphiphilic diblock selenide-labeled copolymer. This copolymer with controlled molecular weight and narrow molecular weight distribution was prepared by sequential organoselenium-mediated reversible addition fragmentation chain transfer (Se-RAFT) polymerization and selenol-based nucleophilic reaction. Nuclear magnetic resonance (NMR) and matrix-assisted laser desorption/ionization time-to-flight (MALDI-TOF) techniques were used to characterize its structure. Its corresponding nanomicelles successfully formed through self-assembly from the copolymer itself. Such nanomicelles could rapidly disassemble under oxidative conditions due to the fragmentation of the Se–C bond. Therefore, this type of nanomicelle based on selenide-labeled amphiphilic copolymers potentially provides a new platform for drug delivery. [ABSTRACT FROM AUTHOR]

Dynamic structures containing polymers can behave as thermosets at room temperature while maintaining good mechanical properties, showing good reprocessability, repairability, and recyclability. In this work, alkyl diselenide is effectively used as a dynamic cross-linker for the design of self-healing poly(urea–urethane) elastomers, which show quantitative healing efficiency at room temperature, without the need for any catalysts or external interventions. Due to the combined action of the urea bond and amide bond, the material has better mechanical properties. We also compared the self-healing effect of alkyl diselenide-based polyurethanes and alkyl disulfide-based polyurethanes. The alkyl diselenide has been incorporated into polyurethane networks using a para-substituted amine diphenyl alkyl diselenide. The resulting materials not only exhibit faster self-healing properties than the corresponding disulfide-based materials, but also show the ability to be processed at temperatures as low as 60 °C. [ABSTRACT FROM AUTHOR]