Search

Modern societies would not survive without electricity and at the same time electrical faults could cause and have caused many catastrophes-mainly deadly fires-to our societies. There are two types of electricity sources: the voltage source such as generators, charged batteries and capacitors, and the current source such as charged inductors, current-regulated rectifiers, and superconducting magnetic energy storage. An "ideal" voltage source-that is often-sought-or-intentionally engineered-generates a constant voltage irrespective of its load current, and an "ideal" current source injects a constant current irrespective of its load voltage. However, two problems exist: (1) voltage or current sources do not represent many emerging natural/renewable energy sources such as wind turbine generators, photovoltaic cells, and fuel cells, whose output voltage and current are strongly dependent on each other, and (2) a short-circuit fault to an artificially-made and controlled "ideal" voltage source or an open-circuit fault to an "ideal" current source can cause catastrophic failures of the source itself and its surrounding circuits due to large (theoretically infinite) short-circuit current or open-circuit voltage. Here we introduce an impedance source concept to represent, characterize, and model those electricity sources whose output voltage and current are strongly dependent on each other. First, we found that many electric sources with no feedback (or active) control of their output voltage and/or current are a natural impedance source with inherent fault protection at short-circuit or open-circuit faults. Second, any electrical source can be artificially controlled to mimic a natural impedance source. Finally, we show how to apply natural impedance sources and nature-mimicking artificially-controlled sources to the electricity grid-the most complex machine ever made by human beings-to realize electricity grids that are naturally stable, self-protected against electrical faults, and resilient to natural and human-made events., (© 2024. The Author(s).)

T-cell reduction is an important characteristic of coronavirus disease 2019 (COVID-19), and its immunopathology is a subject of debate. It may be due to the direct effect of the virus on T-cell exhaustion or indirectly due to T cells redistributing to the lungs. HIV/AIDS naturally served as a T-cell exhaustion disease model for recognizing how the immune system works in the course of COVID-19. In this study, we collected the clinical charts, T-lymphocyte analysis, and chest CT of HIV patients with laboratory-confirmed COVID-19 infection who were admitted to Jin Yin-tan Hospital (Wuhan, China). The median age of the 21 patients was 47 years [interquartile range (IQR) = 40-50 years] and the median CD4 T-cell count was 183 cells/μl (IQR = 96-289 cells/μl). Eleven HIV patients were in the non-AIDS stage and 10 were in the AIDS stage. Nine patients received antiretroviral treatment (ART) and 12 patients did not receive any treatment. Compared to the reported mortality rate (nearly 4%-10%) and severity rate (up to 20%-40%) among COVID-19 patients in hospital, a benign duration with 0% severity and mortality rates was shown by 21 HIV/AIDS patients. The severity rates of COVID-19 were comparable between non-AIDS (median CD4 = 287 cells/μl) and AIDS (median CD4 = 97 cells/μl) patients, despite some of the AIDS patients having baseline lung injury stimulated by HIV: 7 patients (33%) were mild (five in the non-AIDS group and two in the AIDS group) and 14 patients (67%) were moderate (six in the non-AIDS group and eight in the AIDS group). More importantly, we found that a reduction in T-cell number positively correlates with the serum levels of interleukin 6 (IL-6) and C-reactive protein (CRP), which is contrary to the reported findings on the immune response of COVID-19 patients (lower CD4 T-cell counts with higher levels of IL-6 and CRP). In HIV/AIDS, a compromised immune system with lower CD4 T-cell counts might waive the clinical symptoms and inflammatory responses, which suggests lymphocyte redistribution as an immunopathology leading to lymphopenia in COVID-19., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Lin, Lin, Wang, Wen, Xiang, Fan, Li, Wu, Lin, Lin, Sun, Chen, Chen, Lian, Xie, Lin, Xie, Li, Peng, Wang, Lin, Chen, Huang and Fu.)

Major depressive disorder takes at least 3 weeks for clinical anti-depressants, such as serotonin selective reuptake inhibitors, to take effect, and only one-third of patients remit. Ketamine, a kind of anaesthetic, can alleviate symptoms of major depressive disorder patients in a short time and is reported to be effective to treatment-resistant depression patients. The rapid and strong anti-depressant-like effects of ketamine cause wide concern. In addition to ketamine, caloric restriction and sleep deprivation also elicit similar rapid anti-depressant-like effects. However, mechanisms about the rapid anti-depressant-like effects remain unclear. Elucidating the mechanisms of rapid anti-depressant effects is the key to finding new therapeutic targets and developing therapeutic patterns. Therefore, in this review we summarize potential molecular and cellular mechanisms of rapid anti-depressant-like effects based on the pre-clinical and clinical evidence, trying to provide new insight into future therapy., (© 2020 The Authors. Cell Proliferation Published by John Wiley & Sons Ltd.)

The catalytic enantioselective and divergent total syntheses of Aspidosperma alkaloids (+)-10-oxocylindrocarpidine 7, (+)-cylindrocarpidine 1, (-)-N-acetylcylindrocarpinol 6, and (+)-aspidospermine 8 have been accomplished in 11 steps from a common precursor (15) on the basis of a highly concise route. The route features three metal-catalyzed reactions, including the key Pd-catalyzed decarboxylative asymmetric allylation of carbazolones developed in our laboratory. Our syntheses, using a combination of C-H activation, enantioselective catalysis, and collective synthesis, represent the first total synthesis of 10-oxocylindrocarpidine and the first asymmetric total synthesis of cylindrocarpidine and N-acetylcylindrocarpinol.

A new class of chiral primary amine catalysts bearing multiple hydrogen-bonding donors have been designed and synthesized. The newly developed bifunctional organocatalysts efficiently catalyzed not only enantioselective conjugate addition of aromatic ketones to nitroolefins in good yields (up to 87%) with excellent enantioselectivities (97→99% ee) but also enantioselective conjugate addition of acetone to nitroolefins in excellent yields (90-96%) with high enantioselectivities (up to 97% ee)., (© 2012 American Chemical Society)

Two novel bifunctional amine-thiourea organocatalysts 1 and 2, which both bear central and axial chiral elements, have been developed to promote enantioselective Michael reaction between 1,3-dicarbonyl compounds and nitro olefins. The catalyst 2 afforded the desired products with good levels of enantioselectivity (up to 96% ee), showing clearly that two chiral elements of 2 are matched, and enhance the stereochemical control.

Cascade multilevel inverters have been developed for electric utility applications. A cascade M-level inverter consists of (M-1)/2 H-bridges in which each bridge's dc voltage is supported by its own dc capacitor. The new inverter can: (1) generate almost sinusoidal waveform voltage while only switching one time per fundamental cycle; (2) dispense with multi-pulse inverters' transformers used in conventional utility interfaces and static var compensators; (3) enables direct parallel or series transformer-less connection to medium- and high-voltage power systems. In short, the cascade inverter is much more efficient and suitable for utility applications than traditional multi-pulse and pulse width modulation (PWM) inverters. The authors have experimentally demonstrated the superiority of the new inverter for power supply, (hybrid) electric vehicle (EV) motor drive, reactive power (var) and harmonic compensation. This paper summarizes the features, feasibility, and control schemes of the cascade inverter for utility applications including utility interface of renewable energy, voltage regulation, var compensation, and harmonic filtering in power systems. Analytical, simulated, and experimental results demonstrated the superiority of the new inverters.