Search

The rapid acquisition of high-resolution spatial distribution of soil organic matter (SOM) at the field scale is essential for precision agriculture. The UAV imaging hyperspectral technology, with its high spatial resolution and timeliness, can fill the research gap between ground-based monitoring and remote sensing. This study aimed to test the feasibility of using UAV hyperspectral data (400–1000 nm) with a small-sized calibration sample set for mapping SOM at a 1 m resolution in typical low-relief black soil areas of Northeast China. The experiment was conducted in an approximately 20 ha field. For calibration, 20 samples were collected using a 100 × 100 m grid sampling strategy, while 20 samples were randomly collected for independent validation. UAV captured hyperspectral images with a spatial resolution of 0.05 × 0.05 m. The extracted spectra within every 1 × 1 m were then averaged to represent the spectra of that grid; this procedure was also performed across the whole field. Upon applying various spectral pretreatments, including absorbance conversion, multiple scattering correction, Savitzky–Golay smoothing filtering, and first-order differentiation, the absolute maximum values of the correlation coefficients of the spectra for SOM increased from 0.41 to 0.58. Importance analysis from the optimal random forest (RF) model showed that the characterized bands of SOM were located in the 450–600 and 750–900 nm regions. When the RF model was used, the UAV hyperspectra data (UAV-RF) were able to successfully predict SOM, with an R2 of 0.53 and RMSE of 1.48 g kg−1. The prediction accuracy was then compared with that obtained using ordinary kriging (OK) and the RF model based on proximal sensing (PS-RF) with the same number of calibration samples. However, the OK method failed to predict the SOM accuracy (RMSE = 2.17 g kg−1; R2 = 0.02) due to a low sampling density. The semi-covariance function was unable to describe the spatial variability of SOM effectively. When the sampling density was increased to 50 × 50 m, OK successfully predicted SOM, with RMSE = 1.37 g kg−1 and R2 = 0.59, and its results were comparable to those of UAV-RF. The prediction accuracy of PS-RF was generally consistent with that of UAV-RF, with RMSE values of 1.41 g kg−1 and 1.48 g kg−1 and R2 values of 0.57 and 0.53, respectively, which indicated that SOM prediction based on UAV-RF is feasible. Additionally, compared with the PS platforms, the UAV hyperspectral technology could simultaneously provide spectral information of tens or even hundreds of continuous bands and spatial information at the same time. This study provides a reference for further research and development of UAV hyperspectral techniques for fine-scale SOM mapping using a small number of samples. [ABSTRACT FROM AUTHOR]

Abstract: In a spatial point set, clustering patterns (features) are difficult to locate due to the presence of noise. Previous methods, either using grid-based method or distance-based method to separate feature from noise, suffer from the parameter choice problem, which may produce different point patterns in terms of shape and area. This paper presents the Collective Nearest Neighbor method (CLNN) to identify features. CLNN assumes that in spatial data clustered points and noise can be viewed as two homogenous point processes. The one with the higher intensity is considered as a feature and the one with the lower intensity is treated as noise. As a result, they can be separated according to the difference in intensity between them. With CLNN, points are first classified into feature and noise based on the kth nearest distance (the distance between a point and its kth nearest neighbor) at various values of k. Then, CLNN selects those classifications in which the separated classes (i.e. features and noise) are homogenous Poisson processes and cannot be further divided. Finally, CLNN identifies clustered points by averaging the selected classifications. Evaluation of CLNN using simulated data shows that CLNN reduces the number of false points significantly. The comparison between CLNN, the shared nearest neighbor, the spatial scan and the classification entropy method shows that CLNN produced the fewest false points. A case study using seismic data in southwestern China showed that CLNN is able to identify foreshocks of the Songpan earthquake (M =7.2), which may help to locate the epicenter of the Songpan earthquake. [Copyright &y& Elsevier]