Search

The hydrogen economy requires the right conditions to produce hydrogen by sustainable routes and provide it to local and international markets for suitable applications. This study evaluated the political, economic, social, technological, legal, and environmental (PESTLE) conditions that can be instrumental in adopting hydrogen technologies most effectively by encapsulating aspects relevant to key stakeholders from hydrogen technology developers through to end-users. For instance, the analysis has shown that countries within a government effectiveness index of 0.5 and −0.5 are leading the planning of hydrogen economies through strategic cooperation with hydrogen technology developers. Furthermore, the combination of a Doughnut and PESTLE analysis created a novel approach to assessing the adoption of hydrogen technologies while evaluating the impact of the hydrogen economy. For instance, the estimated ammonia demand in 2050 and subsequent anthropogenic nitrogen extraction rate will be about two and a half times more than the 2009 extraction rate.

The decentralization of governance is increasingly considered crucial for delivering development and is being widely adopted in sub-Saharan countries. At the same time, distributed (decentralized) energy systems are increasingly recognized for their role in achieving universal access to energy and are being promoted in sub-Saharan countries. However, little attention has been paid by governments and energy practitioners to the dynamic interrelationships between national and local government and the role of governance decentralization in transitioning to distributed energy systems. This paper traces the complex relationships between accelerated delivery of distributed energy and decentralized local governance systems. The argument is grounded in an exploration of two different approaches to decentralized energy systems governance in Kenya and Malawi. For Kenya, analysis focuses on the energy sector since the adoption of the new decentralized constitution in 2010. In Malawi, it focuses on the involvement of the authors in piloting Local Authority Energy Officers in districts under the decentralization of Malawian energy policy. Our analysis shows that accelerating the speed and scale of implementation for distributed energy systems and enhancing their sustainability and socio-economic impacts is directly linked to the quality of local and national governance structures and their interrelationships. The paper extends existing work in energy and evidence literacy for policy actors by developing an analytical framework, to enable more effective local governance within energy access initiatives in the Global South.

About 3 billion people use conventional carbon-based fuels such as wood, charcoal, and animal dung for their daily cooking needs. Cooking with biomass causes deforestation and habitat loss, emissions of greenhouse gases, and smoke pollution that affects people’s health and well-being. Hydrogen can play a role in enabling clean and safe cooking by reducing household air pollution and reducing greenhouse gas emissions. This first-of-a-kind review study on cooking with hydrogen assessed existing cooking technologies and hydrogen systems in developing country contexts. Our critical assessment also included the modelling and experimental studies on hydrogen. Renewable hydrogen systems and their adoptability in developing countries were analysed. Finally, we presented a scenario for hydrogen production pathways in developing countries. Our findings indicated that hydrogen is attractive and can be safely used as a cooking fuel. However, radical and disruptive models are necessary to transform the traditional cooking landscape. There is a need to develop global south-based hydrogen models that emphasize adoptability and capture the challenges in developing countries. In addition, the techno-economic assumptions of the models vary significantly, leading to a wide-ranging levelized cost of electricity. This finding underscored the necessity to use comprehensive techno-economic assumptions that can accurately predict hydrogen costs.

Hydrogen presents an opportunity for Africa to not only decarbonise its own energy use and enable clean energy access for all, but also to export renewable energy. This paper developed a framework for assessing renewable resources for hydrogen production and provides a new critical analysis as to how and what role hydrogen can play in the complex African energy landscape. The regional solar, wind, CSP, and bio hydrogen potential ranges from 366 to 1311 Gt/year, 162 to 1782 Gt/year, 463 to 2738 Gt/year, and 0.03 to 0.06 Gt/year respectively. The water availability and sensitivity results showed that the water shortages in some countries can be abated by importing water from regions with high renewable water resources. A techno-economic comparative analysis indicated that a high voltage direct current (HVDC) system presents the most cost-effective transportation system with overall costs per kg hydrogen of 0.038 $/kg, followed by water pipeline with 0.084 $/kg, seawater desalination 0.1 $/kg, liquified hydrogen tank truck 0.12 $/kg, compressed hydrogen pipeline 0.16 $/kg, liquefied ammonia pipeline 0.38 $/kg, liquefied ammonia tank truck 0.60 $/kg, and compressed hydrogen tank truck with 0.77 $/kg. The results quantified the significance of economies of scale due to cost effectiveness of systems such as compressed hydrogen pipeline and liquefied hydrogen tank truck systems when hydrogen production is scaled up. Decentralization is favorable under some constraints, e.g., compressed hydrogen and liquefied ammonia tank truck systems will be more cost effective below 800 km and 1400 km due to lower investment and operation costs.

Around 14% of the global population does not have access to electricity. About 95% of those are living in rural Sub-Saharan Africa. Often in these regions, diesel generators are the only source of electricity. The operating cost of these diesel generators is high. However, solar and wind energy are available in most of African countries. This study presents the analysis of designing an off-grid hybrid system with a wind turbine, PV, diesel generator, and battery to power a hospital, school, and 200 household village in four locations across Somalia. The research investigated the availability of wind-solar resources in selected locations. Designing of the system and economic-technical calculations were performed using HOMER. The selection of the optimum design was based on the Cost of Electricity and Net Present Cost. The results show that for Kabaal and Ceel Buur, a WT-PV-DG-Battery is the optimal system as the wind resource in these regions is high. For Saakov and Baki, a PV-DG-Battery system proves to be optimum as the wind resource is limited here. The study also evaluated the control strategy and proved that combined dispatch was the most cost-effective for these locations. The study concluded that hybrid systems are more economical than diesel systems.

Access to reliable, clean, modern cooking enhances life chances. One option is photovoltaic cooking systems. Accurate solar data are needed to ascertain to what extent these can satisfy the needs of local people. In this paper, we investigate how to choose the most accurate satellite-derived solar irradiance database for use in Africa. This is necessary because there is a general shortage of ground measurements for Africa. The solar data are needed to model the output of solar cooking systems, such as a solar panel, battery and electric pressure cooker. Four easily accessible global horizontal irradiation (GHI) satellite databases are validated against ground measurements using a range of statistical tests. The results demonstrate the impact of the mathematical measure used and the phenomenon of balancing errors. Fitting of the satellite model to the appropriate climate zone and/or nearby measurements improves accuracy, as does higher spatial and temporal resolution of input parameters. That said, all the four databases reviewed were found to be suitable for simulating PV yield in East Africa.

The dairy industry accounts for 9–14% of East Africa's agricultural gross development product. Due to lack of milk cooling facilities, dairy farmers in areas without access to reliable grid electricity face problems of high milk spoilage and limited access to formal markets, which limits their income and standard of living. This article examines the economic viability for a number of configurations of off-grid solar, wind, biomass and biogas based milk-cooling systems serving a community in Tanzania. Key risk factors having the greatest impact on system viability are identified and a stochastic approach, by means of a Monte Carlo simulation is employed to determine the risk-adjusted economic performance of the project. The results indicate that biogas based systems offer the most viable option, with an internal rate of return of around 25%, a net present value of around $9000 and a projected increase in farmers' monthly income of at least 78%. Despite specific risk factors, the 300-L cooling system had an 82% probability of a positive net present value. However, larger system cooling capacities have a significant likelihood of a financial loss. Consequently, risk mitigation strategies designed to increase the probability of economic success are proposed.

The lack of modern electricity supply has been a major impediment to proper functioning of the healthcare centers in the rural areas, contributing to high maternal and child mortality rates in a country. Therefore, this study focuses on how to address the identified problem so that the healthcare centers or clinics in the remote areas can provide timely delivery of medical services for the concerned people. This paper, then, presents the analysis of stand-alone hybrid renewable energy systems for basic healthcare services in the rural areas, where there is no grid energy supply or the supply from the existing grid is erratic and unreliable. One major factor that informs the selection of the hybrid energy system in this study is that it promises high reliability compared to a single energy system. The research presents a statistical analysis of the potential of wind and solar energies for a selected rural locations in Nigeria based on the available long-term hourly and daily meteorological data. It employs an optimal technical and economic design and sizing of hybrid electrical power systems’ components such as the wind, PV, battery and inverter systems, using the hybrid optimisation software (HOMER). Results show that Sokoto and Jos sites exist in the high wind potential regions, while the remaining sites are only suitable for small wind applications. Values obtained for global radiation show that all the sites enjoy considerable solar energy potential suitable for varying degree of solar energy applications. PV/wind/diesel/battery hybrid system configuration is considered optimum for rural health center at Iseyin, Sokoto, Maiduguri, Jos and Enugu, while hybrid systems involving PV/diesel/battery is considered ideal for Port-Harcourt, due to the quality of renewable energy potential. Hence, it was concluded that, the abundance of wind and solar resources in the country create an ideal environment for inclusion of renewable energy systems in the design and implementation of standalone power supply systems to improve rural healthcare delivery.

Energy poverty in the majority of the rural households in Kenya is a threat to economic and social development; hence the availability of an affordable and reliable domestic energy source is important. This study investigated: the potential resources for biogas for cooking, suitable anaerobic digesters that could be deployed in rural households, and also the viability of a small community biogas business model. Conservative estimates of the business model parameters and sensitivity analysis revealed that there was adequate biogas potential in central and western Kenya while water scarcity affected other regions' opportunities. Cattle manure was the predominant feedstock, although crop waste has possibilities to contribute to biogas production. Economically and technically, the inflatable tubular digester was found to be the most suitable type for biogas production in rural Kenya. Discounted cash flow analysis of the business model proved a profitable business to supply an affordable household energy at 0.55€/Kg of biogas, with projected household savings of 249€ annually. Labor cost was found to have high significance on the feasibility of the business model which was also sensitive to changes in biogas revenues. Kenya's rural areas have significant biogas potential to reduce energy poverty, generate income and aid social development.

Access to reliable electricity eludes many poor rural Afghan communities despite plentiful renewable resources. Micro-generation seems particularly well suited to Afghanistan’s mountainous, decentralised society but even with substantial investment since 2001 it has not lived up to expectations. Recognising the causes are likely to dwell in the human (rather than technical) domain, this study takes a qualitative, soft systems approach to deriving and validating the necessary conditions that might improve the success rate of micro-generation projects in enabling sustainable economic development. It acknowledges the governance limitations inherent in fragile states and the significance of the community as the most stable element of society, putting the latter at the centre of its thinking. Those conditions identified as critical are summarised as: a holistic approach that sees micro-generation as a component of broader economic development; an environment safe enough for project build and operation, and for the markets necessary for wealth creation; and external support to build community capacity to fund and maintain schemes through-life. These conditions are likely to have relevance for other fragile states; the next step is to develop them in the field before deployment as part of a comprehensive approach to poverty alleviation in Afghanistan and similar states.

Climate change and population growth are likely to be future challenges to obtaining water and growing crops in arid areas. Traditional hand pumps are available but give relatively low flows; they are time consuming and are limited by the depth of wells. In low latitudes, solar energy can be the main renewable energy source for water pumping and desalination. In this project, several ways to get irrigation water, drinking water and electricity have been evaluated in the country of Western Sahara. Solar pumps have been proven to be a reliable economic solution for irrigation, but drinkable water is also required in arid areas where the salinity of water wells can be high. There is an obvious synergy when using photovoltaic solar panels for pumping, desalination, and electricity generation, but the feasibility of a project involving all those uses depends on demand and finance. This paper uses resource, technology, and economic assessments to model scenarios that demonstrate the viability of this triple approach. A Net Present Value of €26,887, and an Internal Rate of Return of 10.41% was found where 7 m3 of water was pumped per day.

Water and energy are both major challenges in rural areas of developing countries, including in the sub-Saharan Africa Region. This study assessed water and energy needs, challenges, and costs in order to produce a body of knowledge and further explore ways in which the water-energy synergies could be utilised. A mixed-mode survey method consisting of questionnaires, semi-structured interviews, observations and focus group discussions involving participants in the rural areas of Chiradzulu District in Malawi was employed. The study findings show that water access is generally inadequate, caused by high population, low yield, disparity in the distribution of water sources, and non-functionality. Using the contingent valuation method, logistic regression showed the only predictor of willingness to pay for drinking water was income and the predictors to pay for irrigation water were occupation, age and household size. Sustainable energy access was also found lacking for cooking and basic energy services such as for lighting, mobile charging and for radios. Biomass remains the main source of cooking energy, whereas battery powered torches have replaced paraffin for lighting. Overall, the household survey results imply that there is need for more sustainable water and energy provision. To address both challenges, the study recommends solar PV water pumping systems which can be designed in such a way that they can be simultaneously used for providing basic energy services. Further research is needed to address cooking energy choices.

Greenhouse gas (GHG) emissions from dairy farms are significant contributors to global warming. However, much of the published work on GHG reduction is focused on either methane (CH4) or nitrous oxide (N2O), with few, if any, considering the interactions that changes to farming systems can have on both gases. This paper takes the raw data from a year of activity on a 300-cow commercial dairy farm in Northern Ireland to more accurately quantify GHG sources by use of a simple predictive model based on IPCC methodology. Differing herd management policies are examined together with the impact of integrating anaerobic digestion (AD) into each farming system. Whilst significant success can be predicted in capturing CH4 and carbon dioxide (CO2) as biogas and preventing N2O emissions, gains made can be lost in a subsequent process, negating some or all of the advantage. The process of extracting value from the captured resource is discussed in light of current farm parameters together with indications of other potential revenue streams. However, this study has concluded that despite the significant potential for GHG reduction, there is little incentive for widespread adoption of manure-based farm-scale AD in the UK at this time.

This paper presents the technical validation of a novel, low-complexity alternative based on the inclusion of a patented (IEPI-MU-2016-185) packed bed for improving the performance of remote, small-scale gasification facilities. This study was carried out in an updraft, atmospheric-pressure gasifier, outfitted with a syngas reflux line, air and oxygen feed, and an upper packed-bed coupled to the gasification unit to improve the syngas quality by catalytic treatment and CO2 adsorption. The experimental facility is located in the rural community San Pedro del Laurel, Ecuador. Gasification experiments, with and without packed material in the upper chamber, were performed to assess its effect on the syngas quality. The assessment revealed that the packed material increases the carbon monoxide (CO) content in the syngas outlet stream while carbon dioxide (CO2) was reduced. This option appears to be a suitable and low-complexity alternative for enhancing the content of energy vectors of syngas in gasification at atmospheric pressure since CO/CO2 ratios of 5.18 and 3.27 were achieved against reported values of 2.46 and 0.94 for operations which did not include the addition of packed material. It is concluded that the upper packed-bed is an active element able to modify syngas characteristics since CO2 content was reduced.

Operational data from an anaerobic wastewater treatment plant (expanded granular sludge bed (EGSB) reactor) were analysed before and after a defect with the solids separator. The results presented suggest that a newly available method for the analysis of total volatile fatty acids (VFAs) was ideal as a rapid, onsite, operational indicator of reactor stability. These total VFAs were shown to provide an earlier warning of the separator problem than the other rapid routine methods of monitoring digesters such as alkalinity and suspended solids. Chemical oxygen demand (COD) removal, pH and gas yield were not as useful for monitoring because of their slow response. The results are from a high rate reactor; the loads were 18 kg COD/m3/d in the first year and 26 in the second with 4·4 d hydraulic retention time. The results for both years of operation demonstrate a 95% conversion of COD into gas with an additional contribution from solids digestion (specific gas yield of 0·4 l methane (CH4)/g CODrem). This high performance was attributed to the solubility of the COD and the efficient EGSB mixing.

This paper presents an overview of the Malawi energy situation and the potential of renewable energy resources including solar, wind, biomass, hydro and geothermal. Despite a range of efforts by local and international stakeholders to increase access to modern energy sources in the country, 89 per cent of Malawi׳s energy is still sourced from traditional biomass mainly fuel wood. Only 8 per cent of the population in Malawi have access to electricity but installed capacity of electricity generation is lower than demand. This leads to load shedding by the electricity supplier; consequently electricity supply in Malawi is unreliable and micro and macroeconomic activities are significantly affected. Solar, non-traditional biomass (crop residues and forest residues not burnt on three stone fireplaces, and biogas), hydro, wind and geothermal are potential energy resources that could enhance Malawi׳s energy security. However, unreliable financing mechanisms for large scale energy projects; shortage of trained human resource; lack of coordination among local institutions; unclear regulation enforcement; and sometimes political governance impede sustainable delivery of energy projects. The Malawi energy policy targets and drivers are also discussed in the paper. Based on the prevailing energy situation, a PESTLE analysis is provided in this paper outlining a novel thinking for addressing the political (P), economic (E), social (S), technological (T), legal (L), and environmental (E) challenges that constrain the development of renewable energy technologies in Malawi.

An analysis has been made as regards emission characteristics of ocean energy systems from life cycle assessment and scope of energy availability from energy accounting studies. Assessment tools developed and standardized were the indices like scope of Green house gases (GHG) emission per kWh power generation, percentage of CO2 saved compared to coal fired power station and the energy payback period. Emission characteristics of ocean energy systems were also compared with that from solar power, bio-fuels and wind energy systems. Four case studies were made comprising of wave energy converters, Ocean Thermal Energy Conversion (OTEC) system and tidal energy. It could be observed that CO2 emission percentage saved from ocean energy schemes were more than 95 per cent; and energy payback period varied between one year and a little higher than two years, depending on the type of the device.

The paper describes “Community scale, decentralized anaerobic digestion for energy and resource technology” which is a joint UK-Thailand project much in line with the current aims of the Thai Government for decentralized energy generation. The use of food waste for biogas generation by the process of anaerobic digestion provides multiple benefits: decreased energy dependency, nutrient preservation and recycling, and reduced greenhouse gas emissions. It is also promoted in the remoter Scotland and Wales of the UK. The aim of the project is the design and deployment of small scale digesters and their networking into remotely monitored units. Here, we are describing initial design of the reactors and some issues associated with using food waste as substrate. Based on the literature, we have also estimated the reactors performance to be 0.40–0.50 m3/kg of feedstock for biogas production.

There is much in the scientific literature regarding the energy value of bioethanol, whether it is sustainable as a transition fuel and what impacts the production could have on food resource availability. This paper addresses these issues through the development of an energy self-sufficient ethanol plant. The plant utilizes waste Musa spp (banana) as the feed stock thereby making no additional demands food production. Solar energy and bioenergy provide thermal and electrical inputs to the process. The energy return on investment for this plant was calculated and a financial model drawn up to determine the economic feasibility of the plant. In one scenario, the operational cost of ethanol production is £0.39/litre with a profit before tax of £44,000 per year for a 460,000 lit re facility. This scenario results in a maximu m selling price for ethanol of £0.45/ litre at an IRR of 11% for a 15 year operation which is comparable to current petrol prices. Furthermore, the process used is very simp le and appropriate for s mall developing countries. The study focuses on the island of St. Lucia which is a banana producing state in the West Indies and concludes that establishment of an ethanol plant is possible with the right financial support with the benefit of reducing imports of petroleu m products, improving the balance of payments and creating emp loyment.

This paper reviews the current status of microgeneration technologies at the domestic scale. Overviews are given for nine such technologies, grouped into three sections: (a) low carbon heating: condensing boilers, biomass boilers and room heaters, air source and ground source heat pumps; (b) renewables: solar photovoltaic panels, flat plate and evacuated tube solar thermal panels and micro-wind; and (c) combined heat and power: Stirling engines, internal combustion engines and fuel cells. Reviews of the construction, operation and performance are given for the leading commercial products of each technology. Wherever possible, data are presented from the field, giving the actual prices paid by customers, efficiencies and energy yields experienced in real-world use, reliability and durability, and the problems faced by users. This information has a UK focus but is generally relevant in the international context. Two issues are found to be prevalent throughout the microgeneration industry. Total installed costs are a premium and vary substantially between technologies, between specific products (e.g. different models of solar panel), and between individual installations. Performance in the field is found in many cases to differ widely from manufacturers’ quotes and laboratory studies, often owing to installation and operational problems. Despite this, microgeneration has demonstrated substantial improvements over conventional generation in terms of fossil fuel consumption, carbon dioxide emissions and energy cost, provided that the appropriate technologies are employed, being installed and operated correctly according to the load requirements of the house and their physical location.

A critical review of the literature relating to government policy and behavioural aspects relevant to the uptake and application of microgeneration in the UK is presented. Given the current policy context aspiring to zero-carbon new homes by 2016 and a variety of minimum standards and financial policy instruments supporting microgeneration in existing dwellings, it appears that this class of technologies could make a significant contribution to UK energy supply and low-carbon buildings in the future. Indeed, achievement of a reduction in greenhouse gas emissions by 80% (the UK government’s 2050 target) for the residential sector may entail substantial deployment of microgeneration. Realisation of the large potential market for microgeneration relies on a variety of interrelated factors such as microeconomics, behavioural aspects, the structure of supporting policy instruments and well-informed technology development. This paper explores these issues in terms of current and proposed policy instruments in the UK. Behavioural aspects associated with both initial uptake of the technology and after purchase are also considered.

In 2006, there was a significant numbers of schools in rural Sabah in Malaysia that had no access to 24-hours electricity. Extension of grid electricity networks becomes uneconomical because of the geographical conditions of these areas and the low electrical energy density demand of the population. Malaysia's rural development policies, therefore, emphasizes on the need to improve the learning and living condition at the rural schools. The abundant solar energy resource in the region is used for providing alternative power supply for these schools. 160 schools in rural Sabah were installed with solar photovoltaic (PV)-diesel hybrid systems. Even though the systems have been in operation for some years, knowledge informing the systems performance is difficult to find. Thus, understanding the system operation is a highly valuable experience and lessons can be learned for implementation of the rural electrification program (REP). This paper describes the finding from a field study at 11 solar PV-diesel hybrid systems. It highlighted some parameters that define the reliability of a solar PV system. The solar PV systems installed at schools in rural Sabah were found to be reliable. They reduced dependency on the diesel fuel consumption and fully utilized clean energy from the sun. It is essential to have reliable solar PV system that can provide sufficient energy for the load demand.

Electricity access is a key driver for developing a modern society. The use of locally generated renewable energy can overcome limitations of expensive grid infrastructure. However, there are still barriers to access particularly for the rural poor in the global south. When individuals or communities invest in electricity provision it is important to know how well the system is performing. Commercial monitoring systems have been developed for large scale renewable energy systems. The cost of these can outweigh the cost of a small decentralised renewable energy system. This paper describes the development of a low cost data logger that is going to be used to monitor the system performance of small photovoltaic nano-grids in Kenya and Bangladesh. The device performs within the expected range for the current, voltage, temperature and irradiance sensors. Data from the data logger device is sent via GPRS to a website where it can be accessed as real time graphical displays and data files.

Municipal solid waste (MSW) is a global problem. Four processes for treatment include landfilling, incineration, recycling and composting the organic fraction. Landfilling can cause the release of the potent greenhouse gas methane into the atmosphere. In many parts of the world, including the European Union, legislation to limit the amount of generated Organic Fraction Municipal Solid Wastes (OFMSW) going to landfill has been introduced. An alternative to landfilling is to anaerobically digest the OFMSW. This paper investigates the concept of a Hybrid Biomass System (HBS) consisting of solar thermal Flat Plat Collector (FPC) providing heat energy to the thermophilic (55°C) anaerobic digestion process, and the potential energy yield of hotel OFMSW in Kolkata. The methodology comprises development and assessment of a theoretical model representing the anaerobic digestion process for optimum biogas yield and TRNSYS simulation of a 5m2 and 10m2 FPC. Theoretical biogas production rates derived are 0.44m3/kgVS or 0.21m3 biogas/guest/day with a C/N ratio of 35:1. 5m2 and 10m2 FPC simulations maintained the thermophilic temperature of 55°C within -1.9 and +2.1. 10m2 FPC provides largest energy contribution at 11% of the annual energy requirement. In is concluded that FPCs can support thermophilic digester heating requirements with heat store or direct integration. In order to meet optimum biogas yield, legislation and policy is required to evolve the current waste management processes with emphasis on infrastructure development and source segregation.

In this paper we discuss operational experiences of two large industrial anaerobic digestion facilities processing brewery waste and maize. The raw effluent from the brewery waste has COD ranging from 5500 mg/l to 41400 mg/l, with variable flow rate and suspended solids up to 4800 mg/l. The Anaerobic Digestion (AD) treatment uses 900m3 EGSB reactor. The two-year monitoring of data includes Ripley's Ratio, Volatile Fatty Acids, and pH. These parameters indicate lower performance and certain instability before the planned maintenance works, followed by the much improved performance afterwards. The average biogas production is 3540 Nm3/day but the variance of the biogas flow remains an issue. The combined Heat and Power (CHP) production from energy crops uses ensilaged, purposely grown maize with 28-34% dry matter and chop length of 6-9 mm. The available three-year data for this AD facilities indicate great process stability. It uses 150 t/day of maize, and result in energy production of 21 GW/year which is 7000 homes equivalent. This energy is evenly split between the sewage treatment works and injection to the public electricity grid. Depending on the dry solids content, the digestate is either stored and spread on the land, or sold to farmers.

The increasing deployment of photovoltaic (PV) systems requires large numbers of skilled engineers with a greater understanding of all aspects of PV technology both theoretical and practical. Developing experimental rigs at universities is expensive and limited to students physically attending the university. One recent approach to increase access to laboratories is the development of remote experiments. Here students can control real experimental equipment using a visual interface via the Internet. In this paper we explore the development of a photovoltaic laboratory to enable users to access and remotely control experimental equipment based at Loughborough University, UK, from anywhere in the world.

Control theory has seldom been used as an analytical tool in pedagogical research for modeling, analyzing or designing effective educational processes, despite its proven benefits in other social sciences, especially economics and finance. In this paper, we use the elements of open-loop and closed-loop feedback systems for evaluating two modes of teaching and lecturing. The first is the open-loop lecturing mode, which still dominates in many European universities, whereas the second is the so-called closed-loop lecturing with feedback and reflection. We provide mathematical models for both modes and apply control engineering techniques and tools to analyze the properties of the two lecturing modes. It is shown that the learning and information retention dynamics differs considerably between the two modes. Furthermore, we show how the closed-loop lecturing mode supersedes the open-loop lecturing mode. The simulation results demonstrate that with lecturing improved higher educational performance requires continuous feedback and reflection.