Search

The resistive switching effect in transition metal oxides allows for a dedicated manipulation of the oxide resistance via electrical stimuli. Here, we perform local-conductivity atomic force microscopy simultaneously with the Kelvin probe force microscopy under ultra-high vacuum conditions using the very same tip investigating the very same sample area to monitor the surface conductivity and surface potential of thermally reduced TiO2 single crystals. We show that the resistance of confined surface areas can be switched by applying a voltage of several volts to the tip during scanning in the contact mode. By conducting in situ oxidation experiments, we present that this surface switching is related to a local redox reaction, which can be controlled electrically allowing for surface nanopatterning and illustrates the capability of transition metal oxides for multilevel resistive switching being a prerequisite for neuromorphic computing. We discuss that the features of the electrically engraved nanopattern can be scaled down to a lower boundary at several tens of nanometers. The observed limit around 25 nm is determined by the presence of intrinsic local variations in electrical surface properties appearing as a common phenomenon of slightly reduced metal oxide surfaces. [ABSTRACT FROM AUTHOR]

We investigate the thermal reduction of TiO2 in ultra-high vacuum. Contrary to what is usually assumed, we observe that the maximal surface reduction occurs not during the heating, but during the cooling of the sample back to room temperature. We describe the self-reduction, which occurs as a result of differences in the energies of defect formation in the bulk and surface regions. The findings presented are based on X-ray photoelectron spectroscopy carried out in-operando during the heating and cooling steps. The presented conclusions, concerning the course of redox processes, are especially important when considering oxides for resistive switching and neuromorphic applications and also when describing the mechanisms related to the basics of operation of solid oxide fuel cells. [ABSTRACT FROM AUTHOR]

Long-time electric field action on perovskite piezoelectric ceramic leads to chemical degradation. A new way to accelerate the degradation is the exposure of the ceramic to DC electric fields under a vacuum. A high-quality commercial piezoelectric material based on PbZr 1-x Ti x O 3 is used to study such impacts. To avoid the influence of ferroelectric properties and possible removal of oxygen and lead oxides during the degradation process, the experiments are in the temperature interval of 500 °C > T > T C . Changes in resistance during the electrodegradation process is an electrically-induced deoxidation, transforming the ceramic into a metallic-like material. This occurs with an extremely low concentration of effused oxygen of 10 16 oxygen atoms per 1 cm 3 . Due to this concentration not obeying the Mott criterion for an isolator-metal transition, it is stated that the removal of oxygen mostly occurs along the grain boundaries. It agrees with the first-principle calculations regarding dislocations with oxygen vacancies. The decrease in resistivity during electrodegradation follows a power law and is associated with a decrease in the dislocation dimension. The observed reoxidation process is a lifeline for the reconstructing (self-healing) properties of electro-degraded ceramics in harsh cosmic conditions. Based on all of these investigations, a macroscopic and nanoscopic model of the electrodegradation is presented.

Protic ionic liquids are promising electrolytes for fuel cell applications. They would allow for an increase in operation temperatures to more than 100 °C, facilitating water and heat management and, thus, increasing overall efficiency. As ionic liquids consist of bulky charged molecules, the structure of the electric double layer significantly differs from that of aqueous electrolytes. In order to elucidate the nanoscale structure of the electrolyte-electrode interface, we employ atomic force spectroscopy, in conjunction with theoretical modeling using molecular dynamics. Investigations of the low-acidic protic ionic liquid diethylmethylammonium triflate, in contact with a platinum (100) single crystal, reveal a layered structure consisting of alternating anion and cation layers at the interface, as already described for aprotic ionic liquids. The structured double layer depends on the applied electrode potential and extends several nanometers into the liquid, whereby the stiffness decreases with increasing distance from the interface. The presence of water distorts the layering, which, in turn, significantly changes the system's electrochemical performance. Our results indicate that for low-acidic ionic liquids, a careful adjustment of the water content is needed in order to enhance the proton transport to and from the catalytic electrode.

Mixed ionic-electronic-conducting perovskites such as SrTiO 3 are promising materials to be employed in efficient energy conversion or information processing. These materials exhibit a self-doping effect related to the formation of oxygen vacancies and electronic charge carriers upon reduction. It has been found that dislocations play a prominent role in this self-doping process, serving as easy reduction sites, which result in the formation of conducting filaments along the dislocations. While this effect has been investigated in detail with theoretical calculations and direct observations using local-conductivity atomic force microscopy, the present work highlights the optical properties of dislocations in SrTiO 3 single crystals. Using the change in optical absorption upon reduction as an indicator, two well-defined arrangements of dislocations, namely a bicrystal boundary and a slip band induced by mechanical deformation, are investigated by means of scanning near-field optical microscopy. In both cases, the regions with enhanced dislocation density can be clearly identified as regions with higher optical absorption. Assisted by ab initio calculations, confirming that the agglomeration of oxygen vacancies significantly change the local dielectric constants of the material, the results provide direct evidence that reduced dislocations can be classified as alien matter embedded in the SrTiO 3 matrix.

Controlling the work function of transition metal oxides is of key importance with regard to future energy production and storage. As the majority of applications involve the use of heterostructures, the most suitable characterization technique is Kelvin probe force microscopy (KPFM), which provides excellent energetic and lateral resolution. In this paper, we demonstrate precise characterization of the work function using the example of artificially formed crystalline titanium monoxide (TiO) nanowires on strontium titanate (SrTiO 3 ) surfaces, providing a sharp atomic interface. The measured value of 3.31(21) eV is the first experimental work function evidence for a cubic TiO phase, where significant variations among the different crystallographic facets were also observed. Despite the remarkable height of the TiO nanowires, KPFM was implemented to achieve a high lateral resolution of 15 nm, which is close to the topographical limit. In this study, we also show the unique possibility of obtaining work function and conductivity maps on the same area by combining noncontact and contact modes of atomic force microscopy (AFM). As most of the real applications require ambient operating conditions, we have additionally checked the impact of air venting on the work function of the TiO/SrTiO 3 (100) heterostructure, proving that surface reoxidation occurs and results in a work function increase of 0.9 eV and 0.6 eV for SrTiO 3 and TiO, respectively. Additionally, the influence of adsorbed surface species was estimated to contribute 0.4 eV and 0.2 eV to the work function of both structures. The presented method employing KPFM and local conductivity AFM for the characterization of the work function of transition metal oxides may help in understanding the impact of reduction and oxidation on electronic properties, which is of high importance in the development of effective sensing and catalytic devices.

Electroreduction experiments on metal oxides are well established for investigating the nature of the material change in memresistive devices, whose basic working principle is an electrically-induced reduction. While numerous research studies on this topic have been conducted, the influence of extended defects such as dislocations has not been addressed in detail hitherto. Here, we show by employing thermal microscopy to detect local Joule heating effects in the first stage of electroreduction of SrTiO 3 that the current is channelled along extended defects such as dislocations which were introduced mechanically by scratching or sawing. After prolonged degradation, the matrix of the crystal is also electroreduced and the influence of the initially present dislocations diminished. At this stage, a hotspot at the anode develops due to stoichiometry polarisation leading not only to the gliding of existing dislocations, but also to the evolution of new dislocations. Such a formation is caused by electrical and thermal stress showing dislocations may play a significant role in resistive switching effects.

The electrical properties of SrTiO 3 (100) single crystals were investigated in-situ at different stages of thermal reduction by means of a 4-tip STM. Using the tips of the STM as electrical probes, distance-dependent four-point measurements were performed at the surface of the crystal at room temperature after reduction by thermal treatment. For annealing temperatures T ≤ 700 °C, charge transport is confined to a surface region <3 μm below the surface. For reduction at T ≥ 900 °C a transition from a conducting 2D sheet with insulating bulk to a system with dominant 3D bulk conductivity is found. At an intermediate reduction temperature of T = 800 °C, a regime with mixed 2D/3D contributions is observed in the distance-dependent resistance measurements. Describing the depth-dependent conductivity with an analytical N-layer model, this regime of mixed 2D/3D conductivity is evaluated quantitatively under the assumption of an exponentially decaying conductivity profile, correlated with the previously observed depth-dependent dislocation density in the sample. A non-monotonous temperature dependence of the 3D conductivity in the respective conducting layer is found and possible underlying mechanisms are discussed, particularly with regard to non-intrinsic material properties depending on details of the sample preparation.